Age | Commit message (Collapse) | Author |
|
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
|
|
When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Create separate initialization for dns_core.c to be run unconditionally
during startup instead of being initialized by the first dns resolver to
be registered. This ensures that 'sched' is initialized before it can be
potentially used.
Replace ast_register_atexit with ast_register_cleanup in media_cache.c.
There is no reason for this cleanup to happen unconditionally.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
|
|
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
|
|
|
|
ASTERISK-27712
Reported by: Joerg Sonnenberger, D'Arcy Cain
Change-Id: Idf1c9d43617a3e13028b95b313415903d80ef807
|
|
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
|
|
A couple of additional properties are needed in rtp_engine to enable
support for packet retransmission: AST_RTP_PROPERTY_RETRANS_RECV and
AST_RTP_PROPERTY_RETRANS_SEND. These will both be enabled automatically
if an endpoint has the webrtc option enabled. While this adds no
functionality currently, it will serve as a building block for future
changes for RTP retransmission support.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Ic598acd042a045f9d10e5bdccb66f4efc9e587cc
|
|
ASTERISK-27670
Change-Id: I07a8ef8bbd6001e25711fa1bff152eb6c9efa729
|
|
dsp_talking_threshold docs."
|
|
|
|
|
|
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
|
|
|
|
|
|
Create ast_atomic macro's to provide a consistent interface to the
common functionality of __atomic and __sync built-in functions.
ASTERISK-27619
Change-Id: Ieba3f81832a0e25c5725ea067e5d6f742d33eb5b
|
|
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
|
|
|
|
|
|
|
|
This addresses all performance issues with 'module load' completion. In
addition to using ast_cli_completion_add we stop using libedit's
filename_completion_function, instead using ast_file_read_dir. This
ensures all results are produced from a single call to opendir.
Change-Id: I8bf51ffaa7ef1606f3bd1b5bb13f1905d72c6134
|
|
Because of a copy-and-paste error, the Asterisk project was using __typeof
instead of typeof. It works because typeof, __typeof, and __typeof__ are
supported by GCC, but here the escaped variant was not intended. Therefore,
for consistence, we change this to typeof.
Change-Id: I2a962c3e596e882f691a19345445b14571a5f07c
|
|
This change causes the configure script to throw an error if neither
__sync nor __atomic builtin functions are available.
ASTERISK-27619
Change-Id: Ie01a281e0f5c41dfeeb5f250c1ccea8752f56ef9
|
|
Add a check to configure.ac for __atomic_fetch_add support. If found
use the __atomic built-in operators for ast_atomic_dec_and_test and
ast_atomic_fetchadd_int.
ASTERISK~27619
Change-Id: I65b4feb02bae368904ed0fb03f585c05f50a690e
|
|
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
|
|
* Copy more than one character at a time when there is nothing to
substitute.
* Fix off by one error if a '}' or ']' is missing.
* Eliminated the requirement that the "used" parameter had to point to a
variable. The current callers were always declaring a variable to meet
the requirement and discarding the value put into that variable. Now it
can be NULL.
* In ast_str_substitute_variables_full() fixed using the bogus channel to
evaluate a function. We were not using the bogus channel we just created
to help evaluate a subexpression.
Change-Id: Ia83d99f4f16abe47f329eb39b6ff2013ae7c9854
|
|
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
|
|
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
|
|
ast_vector_string_split:
This function will add items to an ast_vector_string by splitting values
of a string buffer. Items are appended to the vector in the order they
are found.
ast_vector_const_string:
A vector of 'const char *'.
Change-Id: I1bf02a1efeb2baeea11c59c557d39dd1197494d7
|
|
|
|
|
|
This function returns NULL if the module in question is not running. I
did not change ast_module_ref as most callers do not check the result
and they always call ast_module_unref.
Make use of this function when running registered items from:
* app_stack API's
* bridge technologies
* CLI commands
* File formats
* Manager Actions
* RTP engines
* Sorcery Wizards
* Timing Interfaces
* Translators
* AGI Commands
* Fax Technologies
ASTERISK-20346 #close
Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc
|
|
* AO2_STRING_FIELD_CASE_HASH_FN
* AO2_STRING_FIELD_CASE_CMP_FN
* AO2_STRING_FIELD_CASE_SORT_FN
Change-Id: I11af8c6a0c43380a42732553f519c667abb842cf
|
|
Add a reference to the calling module when it is active to protect
access to datastore->info. Remove module references done by
func_periodic_hook as the datastore now handles it.
ASTERISK-25128 #close
Change-Id: I8357a3711e77591d0d1dd8ab4211a7eedd782c89
|
|
This is the old ASTOBJ macro's which are no longer used except by the
deprecated netsock.c. Move it to the chan_iax2 include folder so it
does not get used elsewhere.
Change-Id: I7e4ae96678b36b9f41d3cae14b167f110eb5d349
|
|
Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0
|
|
|
|
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
|
|
Change-Id: I62e6ddeb261ef012687e1fb6734c554e2499b6bf
|
|
|
|
* changes:
aco: Minimize use of regex.
aco: Create ways to minimize use of regex.
|
|
This moves netsock.c / netsock.h to the chan_iax2 module. netsock.h has
been marked deprecated since 13.0.0, chan_iax2 is the only remaining
user.
Change-Id: I28c6578043bac18de5ea608e136acec4f83d5dd3
|
|
* changes:
loader: Use vector to build apha sorted module lists.
loader: Replace priority heap with vector.
|
|
|
|
|
|
ACO uses regex in many situations where it is completely unneeded. In
some cases this doubles the total processing performed by
aco_process_config.
* Create ACO_IGNORE category type for use in place of skip_category
regex source string.
* Create additional aco_category_op values to allow specifying category
filter using either a single plain string or a NULL terminated array
of plain strings.
* Create ACO_PREFIX to allow matching option names to case insensitive
prefixes.
Change-Id: I66a920dcd8e2b0301f73f968016440a985e72821
|
|
This is needed for future changes which will require being able to
process the load priority out of order.
Change-Id: Ia23421197f09789940510b03ebbbf3bf24d51bea
|
|
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
|
|
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
|
|
A couple of places were setting the status to "UNKNOWN" when qualifies were
being disabled. Instead this should be set to the "CREATED" status that
represents when a contact is given (uri available), but the qualify frequency
is set to zero so we don't know the status.
This patch updates the relevant places with "CREATED". It also updates the
"CREATED" status description (value shown in CLI/AMI/ARI output) to a value
of "NonQualified"/"NonQual" as this description is hopefully less confusing.
ASTERISK-27467
Change-Id: Id67509d25df92a72eb3683720ad2a95a27b50c89
|
|
|