Age | Commit message (Collapse) | Author |
|
Add Uptime and LastReload to event FullyBooted.
ASTERISK-26058 #close
Reported by: Niklas Larsson
Change-Id: I909b330801c0990d78df9b272ab0adc95aecb15e
|
|
When 2d7a4a3357 was merged, it missed the fact that Verbose log messages
are formatted and handled by 'verbosers'. Verbosers are registered
functions that handle verbose messages only; they exist as a separate
class of callbacks. This was done to handle the 'magic' that must be
inserted into Verbose messages sent to remote consoles, so that the
consoles can format the messages correctly, i.e., the leading
tabs/characters.
In reality, verbosers are a weird appendage: they're a separate class of
formatters/message handlers outside of what handles all other log
messages in Asterisk. After some code inspection, it became clear that
simply passing a Verbose message along with its 'sublevel' importance
through the normal logging mechanisms removes the need for verbosers
altogether.
This patch removes the verbosers, and makes the default log formatter
aware that, if the log channel is a console log, it should simply insert
the 'verbose magic' into the log messages itself. This allows the
console handlers to interpret and format the verbose message
themselves.
This simplifies the code quite a lot, and should improve the performance
of printing verbose messages by a reasonable factor:
(1) It removes a number of memory allocations that were done on each
verobse message
(2) It removes the need to strip the verbose magic out of the verbose
log messages before passing them to non-console log channels
(3) It now performs fewer iterations over lists when handling verbose
messages
Since verbose messages are now handled like other log messages (for the
most part), the JSON formatting of the messages works as well.
ASTERISK-25425
Change-Id: I21bf23f0a1e489b5102f8a035fe8871552ce4f96
|
|
Locking some objects like sorcery objects can be tricky because the underlying
ao2 object may not be the same for all callers. For instance, two threads that
call ast_sorcery_retrieve_by_id on the same aor name might actually get 2
different ao2 objects if the underlying wizard had to rehydrate the aor from a
database. Locking one ao2 object doesn't have any effect on the other even if
those objects had locks in the first place.
Named locks allow access control by keyspace and key strings. Now an "aor"
named "1000" can be locked and any other thread attempting to lock "aor" "1000"
will wait regardless of whether the underlying ao2 object is the same or not.
Mutex and rwlocks are supported.
This capability will initially be used to lock an aor when multiple threads may
be attempting to prune expired contacts from it.
Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45
|
|
During stress testing, we have frequently seen crashes occur because a
CLI or AMI command attempts to access information that is in the process
of being destroyed.
When addressing how to fix this issue, we initially considered fixing
individual crashes we observed. However, the changes required to fix
those problems would introduce considerable overhead to the nominal
case. This is not reasonable in order to prevent a crash from occurring
while Asterisk is already shutting down.
Instead, this change makes it so AMI and CLI commands cannot be executed
if Asterisk is being shut down. For AMI, this is absolute. For CLI,
though, certain commands can be registered so that they may be run
during Asterisk shutdown.
ASTERISK-25825 #close
Change-Id: I8887e215ac352fadf7f4c1e082da9089b1421990
|
|
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
|
|
Make sure buf[res] is not accessed at res=-1 (buffer underrun).
Address Sanitizer will complain about this quite loudly.
ASTERISK-24801 #close
Change-Id: Ifcd7f691310815a31756b76067c56fba299d3ae9
|
|
* changes:
main/pbx: Move hangup handler routines to pbx_hangup_handler.c.
main/pbx: Move dialplan application management routines to pbx_app.c.
main/pbx: Move switch routines to pbx_switch.c.
|
|
|
|
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves hangup handler management functions to their own source.
Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104
|
|
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves dialplan application management functions to their own source.
Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c
|
|
This is the fifth patch in a series meant to reduce the bulk of pbx.c.
This moves ast_switch functions to their own source.
Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e
|
|
This is the third patch in a series meant to reduce the bulk of pbx.c.
This moves channel and global variable routines to their own source.
Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6
|
|
This is the second patch in a series meant to reduce the bulk of pbx.c.
This moves custom function management routines to their own source.
Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177
|
|
Change-Id: I22d3c90f6f27df82e915bbf81c1d91221f7a945e
|
|
We joked about splitting pbx.c into multiple files but this first step was
fairly easy. All of the pbx_builtin dialplan applications have been moved
into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins()
is called by asterisk.c just after load_pbx().
A few functions were renamed and are cross-exposed between the 2 source files.
Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a
|
|
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
- Remove unused term_prep() and term_prompt() functions.
ASTERISK-25585 #close
Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f
|
|
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
|
|
This patch adds a new API to the Asterisk core that acts as a media
cache. The core API itself is mostly a thin wrapper around some bucket
API provided implementation that itself acts as the mechanism of
retrieval for media. The media cache API in the core provides the
following:
* A very thin in-memory cache of the active bucket_file items. Unlike a
more traditional cache, it provides no expiration mechanisms. Most
queries that hit the in-memory cache will also call into the bucket
implementations as well. The bucket implementations are responsible
for determining whether or not the active record is active and valid.
This makes sense for the most likely implementation of a media cache
backend, i.e., HTTP. The HTTP layer itself is the actual arbiter of
whether or not a record is truly active; as such, the in-memory cache
in the core has to defer to it.
* The ability to create new items in the media cache from local
resources. This allows for re-creation of items in the cache on
restart.
* Synchronization of items in the media cache to the AstDB. This
also includes various pieces of important metadata.
The API provides sufficient access that higher level APIs, such as the
file or app APIs, do not have to worry about the semantics of the bucket
APIs when needing to playback a resource.
In addition, this patch provides unit tests for the media cache API. The
unit tests use a fake bucket backend to verify correctness.
Change-Id: I11227abbf14d8929eeb140ddd101dd5c3820391e
|
|
Prior to this patch, the DNS core present in master had no default system-level
resolver implementation. Therefore, it was not possible for the DNS core to
perform resolutions unless the libunbound library was installed and the
res_resolver_unbound module was loaded.
This patch introduces a system-level DNS resolver implementation that will
register itself with the lowest consideration priority available (to ensure
that it is to be used only as a last resort). The resolver relies on low-level
DNS search functions to perform a rudimentary DNS search based on a provided
query and then supplies the search results to the DNS core.
ASTERISK-25146 #close
Reported By: Joshua Colp
Change-Id: I3b36ea17b889a98df4f8d80d50bb7ee175afa077
|
|
Previous versions of Asterisk processed command-line options before
processing asterisk.conf. This meant that if an option was set in
asterisk.conf, it could not be overridden with the equivelent command
line option. This change causes Asterisk to process the command-line
twice. First it processes options that are needed to load asterisk.conf,
then it processes the remaining options after the config is read.
This changes the function of -X slightly. Previously using -X without
disabling execincludes in asterisk.conf caused #exec to be usable in any
config. Now -X only enables #exec for the load of asterisk.conf, if it
is wanted in the rest of the system it must be enabled with execincludes
in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect
the limited function of -X.
ASTERISK-25042 #close
Reported by: Corey Farrell
Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7
|
|
The code which reads asterisk.conf supports processing the debug
option with ast_true, but ast_true returns -1. This causes debug
to still be off, convert to 1 so debug will be on as requested.
ASTERISK-25042
Reported by: Corey Farrell
Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6
|
|
Change-Id: I5e75d7f7e2c096d74edd9e8735268a894f4b93ab
|
|
This ensures that refdebug is initialized before AO2_DEBUG if
both are enabled, since AO2_DEBUG allocates a container.
This change also makes AO2_DEBUG initialization critical, a
failure will abort Asterisk startup. This is needed since
the failure would be caused by reg_containers allocation
failure, and that would result in a segmentation fault by
ao2_container_register later in startup.
ASTERISK-25048 #close
Reported by: Corey Farrell
Change-Id: I9a243ea3fc5653b48b931ba6d61971cb2e530244
|
|
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
|
|
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
|
|
Until we have a true module management facility it's sometimes necessary for one
module to force a reload on another before its own load is complete. If
Asterisk isn't fully booted yet, these reloads are deferred. The problem is
that asterisk reports fully booted before processing the deferred reloads which
means Asterisk really isn't quite ready when it says it is.
This patch moves the report of fully booted after the processing of the deferred
reloads is complete.
Since the pjsip stack has the most number of related modules, I ran the
channels/pjsip testsuite to make sure there aren't any issues. All tests
passed.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4604/
........
Merged revisions 434544 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433497 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses compilation issues for OpenBSD. Specifically, it
addresses:
* It allows including <sys/vmmeter.h> in asterisk.c
* Provides a needed (size_t) cast in xmldoc.c
In 13+, it also addresses a conditional inclusion in loader.c.
Review: https://reviewboard.asterisk.org/r/4506
ASTERISK-24880 #close
Reported by: snuffy
Tested by: snuffy
patches:
misc-openbsd.diff uploaded by snuffy (License 5024)
........
Merged revisions 433245 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433247 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Using DEBUG_CHAOS several instances of a null
pointer crash, and one uninitialized variable
were uncovered and fixed. Also added details
on why Asterisk failed to initialize.
Review: https://reviewboard.asterisk.org/r/4468/
........
Merged revisions 433064 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
listener() opens the same code block in two places (#if and #else). This
confuses some folding editors causing it to think that an extra code block
was opened. Folding in 'geany' causes all code after listener() to be
folded as if it were part of that procedure.
ASTERISK-24813 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4435/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
........
Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses compilation errors on OS X. It's been a while, so
there's quite a few things.
* Fixed __attribute__ decls in route.h to be portable.
* Fixed htonll and ntohll to work when they are defined as macros.
* Replaced sem_t usage with our ast_sem wrapper.
* Added ast_sem_timedwait to our ast_sem wrapper.
* Fixed some GCC 4.9 warnings using sig*set() functions.
* Fixed some format strings for portability.
* Fixed compilation issues with res_timing_kqueue (although tests still fail
on OS X).
* Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue
on OS X).
ASTERISK-24539 #close
Reported by: George Joseph
ASTERISK-24544 #close
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/4327/
........
Merged revisions 431092 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The QUEUESTART log entry has historically acted like a fully booted event
for the queue_log file. When the QUEUESTART entry was posted to the log
was broken by the change made by ASTERISK-15863.
* Made post the QUEUESTART queue_log entry when Asterisk fully boots.
This restores the intent of that log entry and happens after realtime has
had a chance to load.
AST-1444 #close
Reported by: Denis Martinez
Review: https://reviewboard.asterisk.org/r/4282/
........
Merged revisions 430009 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430010 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When connecting to the remote console, an id string
is first provided that consts of the hostname, pid,
and version. This is parsed by the remote instance
using a buffer that may be too short, and can allow
a buffer overrun because it is not terminated. This
patch adds termination and a larger buffer.
Review: https://reviewboard.asterisk.org/r/4182/
........
Merged revisions 429223 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In the old times media formats were represented using a bit field. This was
fast but had a few limitations.
1. Asterisk was limited in how many formats it could handle.
2. Formats, being a bit field, could not include any attribute information.
A format was strictly its type, e.g., "this is ulaw".
This was changed in Asterisk 10 (see
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for
notes on that work) which led to the creation of the ast_format structure.
This structure allowed Asterisk to handle attributes and bundle information
with a format.
Additionally, ast_format_cap was created to act as a container for multiple
formats that, together, formed the capability of some entity. Another
mechanism was added to allow logic to be registered which performed format
attribute negotiation. Everywhere throughout the codebase Asterisk was
changed to use this strategy.
Unfortunately, in software, there is no free lunch. These new capabilities
came at a cost.
Performance analysis and profiling showed that we spend an inordinate
amount of time comparing, copying, and generally manipulating formats and
their related structures. Basic prototyping has shown that a reasonably
large performance improvement could be made in this area. This patch is the
result of that project, which overhauled the media format architecture
and its usage in Asterisk to improve performance.
Generally, the new philosophy for handling formats is as follows:
* The ast_format structure is reference counted. This removed a large amount
of the memory allocations and copying that was done in prior versions.
* In order to prevent race conditions while keeping things performant, the
ast_format structure is immutable by convention and lock-free. Violate this
tenet at your peril!
* Because formats are reference counted, codecs are also reference counted.
The Asterisk core generally provides built-in codecs and caches the
ast_format structures created to represent them. Generally, to prevent
inordinate amounts of module reference bumping, codecs and formats can be
added at run-time but cannot be removed.
* All compatibility with the bit field representation of codecs/formats has
been moved to a compatibility API. The primary user of this representation
is chan_iax2, which must continue to maintain its bit-field usage of formats
for interoperability concerns.
* When a format is negotiated with attributes, or when a format cannot be
represented by one of the cached formats, a new format object is created or
cloned from an existing format. That format may have the same codec
underlying it, but is a different format than a version of the format with
different attributes or without attributes.
* While formats are reference counted objects, the reference count maintained
on the format should be manipulated with care. Formats are generally cached
and will persist for the lifetime of Asterisk and do not explicitly need
to have their lifetime modified. An exception to this is when the user of a
format does not know where the format came from *and* the user may outlive
the provider of the format. This occurs, for example, when a format is read
from a channel: the channel may have a format with attributes (hence,
non-cached) and the user of the format may last longer than the channel (if
the reference to the channel is released prior to the format's reference).
For more information on this work, see the API design notes:
https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite
Finally, this work was the culmination of a large number of developer's
efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the
work in the Asterisk core, chan_sip, and was an invaluable resource in peer
reviews throughout this project.
There were a substantial number of patches contributed during this work; the
following issues/patch names simply reflect some of the work (and will cause
the release scripts to give attribution to the individuals who work on them).
Reviews:
https://reviewboard.asterisk.org/r/3814
https://reviewboard.asterisk.org/r/3808
https://reviewboard.asterisk.org/r/3805
https://reviewboard.asterisk.org/r/3803
https://reviewboard.asterisk.org/r/3801
https://reviewboard.asterisk.org/r/3798
https://reviewboard.asterisk.org/r/3800
https://reviewboard.asterisk.org/r/3794
https://reviewboard.asterisk.org/r/3793
https://reviewboard.asterisk.org/r/3792
https://reviewboard.asterisk.org/r/3791
https://reviewboard.asterisk.org/r/3790
https://reviewboard.asterisk.org/r/3789
https://reviewboard.asterisk.org/r/3788
https://reviewboard.asterisk.org/r/3787
https://reviewboard.asterisk.org/r/3786
https://reviewboard.asterisk.org/r/3784
https://reviewboard.asterisk.org/r/3783
https://reviewboard.asterisk.org/r/3778
https://reviewboard.asterisk.org/r/3774
https://reviewboard.asterisk.org/r/3775
https://reviewboard.asterisk.org/r/3772
https://reviewboard.asterisk.org/r/3761
https://reviewboard.asterisk.org/r/3754
https://reviewboard.asterisk.org/r/3753
https://reviewboard.asterisk.org/r/3751
https://reviewboard.asterisk.org/r/3750
https://reviewboard.asterisk.org/r/3748
https://reviewboard.asterisk.org/r/3747
https://reviewboard.asterisk.org/r/3746
https://reviewboard.asterisk.org/r/3742
https://reviewboard.asterisk.org/r/3740
https://reviewboard.asterisk.org/r/3739
https://reviewboard.asterisk.org/r/3738
https://reviewboard.asterisk.org/r/3737
https://reviewboard.asterisk.org/r/3736
https://reviewboard.asterisk.org/r/3734
https://reviewboard.asterisk.org/r/3722
https://reviewboard.asterisk.org/r/3713
https://reviewboard.asterisk.org/r/3703
https://reviewboard.asterisk.org/r/3689
https://reviewboard.asterisk.org/r/3687
https://reviewboard.asterisk.org/r/3674
https://reviewboard.asterisk.org/r/3671
https://reviewboard.asterisk.org/r/3667
https://reviewboard.asterisk.org/r/3665
https://reviewboard.asterisk.org/r/3625
https://reviewboard.asterisk.org/r/3602
https://reviewboard.asterisk.org/r/3519
https://reviewboard.asterisk.org/r/3518
https://reviewboard.asterisk.org/r/3516
https://reviewboard.asterisk.org/r/3515
https://reviewboard.asterisk.org/r/3512
https://reviewboard.asterisk.org/r/3506
https://reviewboard.asterisk.org/r/3413
https://reviewboard.asterisk.org/r/3410
https://reviewboard.asterisk.org/r/3387
https://reviewboard.asterisk.org/r/3388
https://reviewboard.asterisk.org/r/3389
https://reviewboard.asterisk.org/r/3390
https://reviewboard.asterisk.org/r/3321
https://reviewboard.asterisk.org/r/3320
https://reviewboard.asterisk.org/r/3319
https://reviewboard.asterisk.org/r/3318
https://reviewboard.asterisk.org/r/3266
https://reviewboard.asterisk.org/r/3265
https://reviewboard.asterisk.org/r/3234
https://reviewboard.asterisk.org/r/3178
ASTERISK-23114 #close
Reported by: mjordan
media_formats_translation_core.diff uploaded by kharwell (License 6464)
rb3506.diff uploaded by mjordan (License 6283)
media_format_app_file.diff uploaded by kharwell (License 6464)
misc-2.diff uploaded by file (License 5000)
chan_mild-3.diff uploaded by file (License 5000)
chan_obscure.diff uploaded by file (License 5000)
jingle.diff uploaded by file (License 5000)
funcs.diff uploaded by file (License 5000)
formats.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
bridges.diff uploaded by file (License 5000)
mf-codecs-2.diff uploaded by file (License 5000)
mf-app_fax.diff uploaded by file (License 5000)
mf-apps-3.diff uploaded by file (License 5000)
media-formats-3.diff uploaded by file (License 5000)
ASTERISK-23715
rb3713.patch uploaded by coreyfarrell (License 5909)
rb3689.patch uploaded by mjordan (License 6283)
ASTERISK-23957
rb3722.patch uploaded by mjordan (License 6283)
mf-attributes-3.diff uploaded by file (License 5000)
ASTERISK-23958
Tested by: jrose
rb3822.patch uploaded by coreyfarrell (License 5909)
rb3800.patch uploaded by jrose (License 6182)
chan_sip.diff uploaded by mjordan (License 6283)
rb3747.patch uploaded by jrose (License 6182)
ASTERISK-23959 #close
Tested by: sgriepentrog, mjordan, coreyfarrell
sip_cleanup.diff uploaded by opticron (License 6273)
chan_sip_caps.diff uploaded by mjordan (License 6283)
rb3751.patch uploaded by coreyfarrell (License 5909)
chan_sip-3.diff uploaded by file (License 5000)
ASTERISK-23960 #close
Tested by: opticron
direct_media.diff uploaded by opticron (License 6273)
pjsip-direct-media.diff uploaded by file (License 5000)
format_cap_remove.diff uploaded by opticron (License 6273)
media_format_fixes.diff uploaded by opticron (License 6273)
chan_pjsip-2.diff uploaded by file (License 5000)
ASTERISK-23966 #close
Tested by: rmudgett
rb3803.patch uploaded by rmudgetti (License 5621)
chan_dahdi.diff uploaded by file (License 5000)
ASTERISK-24064 #close
Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose
rb3814.patch uploaded by rmudgett (License 5621)
moh_cleanup.diff uploaded by opticron (License 6273)
bridge_leak.diff uploaded by opticron (License 6273)
translate.diff uploaded by file (License 5000)
rb3795.patch uploaded by rmudgett (License 5621)
tls_fix.diff uploaded by mjordan (License 6283)
fax-mf-fix-2.diff uploaded by file (License 5000)
rtp_transfer_stuff uploaded by mjordan (License 6283)
rb3787.patch uploaded by rmudgett (License 5621)
media-formats-explicit-translate-format-3.diff uploaded by file (License 5000)
format_cache_case_fix.diff uploaded by opticron (License 6273)
rb3774.patch uploaded by rmudgett (License 5621)
rb3775.patch uploaded by rmudgett (License 5621)
rtp_engine_fix.diff uploaded by opticron (License 6273)
rtp_crash_fix.diff uploaded by opticron (License 6273)
rb3753.patch uploaded by mjordan (License 6283)
rb3750.patch uploaded by mjordan (License 6283)
rb3748.patch uploaded by rmudgett (License 5621)
media_format_fixes.diff uploaded by opticron (License 6273)
rb3740.patch uploaded by mjordan (License 6283)
rb3739.patch uploaded by mjordan (License 6283)
rb3734.patch uploaded by mjordan (License 6283)
rb3689.patch uploaded by mjordan (License 6283)
rb3674.patch uploaded by coreyfarrell (License 5909)
rb3671.patch uploaded by coreyfarrell (License 5909)
rb3667.patch uploaded by coreyfarrell (License 5909)
rb3665.patch uploaded by mjordan (License 6283)
rb3625.patch uploaded by coreyfarrell (License 5909)
rb3602.patch uploaded by coreyfarrell (License 5909)
format_compatibility-2.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It's been 2014 for like... 6 months.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses some aesthetic issues in Asterisk. These are all just
minor tweaks to improve the look of the CLI when used in a variety of
settings. Specifically:
* A number of chatty verbose messages were removed or demoted to DEBUG
messages. Verbose messages with a verbosity level of 5 or higher were -
if kept as verbose messages - demoted to level 4. Several messages
that were emitted at verbose level 3 were demoted to 4, as announcement
of dialplan applications being executed occur at level 3 (and so the
effects of those applications should generally be less).
* Some verbose messages that only appear when their respective 'debug'
options are enabled were bumped up to always be displayed.
* Prefix/timestamping of verbose messages were moved to the verboser
handlers. This was done to prevent duplication of prefixes when the
timestamp option (-T) is used with the CLI.
* Verbose magic is removed from messages before being emitted to
non-verboser handlers. This prevents the magic in multi-line verbose
messages (such as SIP debug traces or the output of DumpChan) from
being written to files.
* _Slightly_ better support for the "light background" option (-W) was
added. This includes using ast_term_quit in the output of XML
documentation help, as well as changing the "Asterisk Ready" prompt to
bright green on the default background (which stands a better chance of
being displayed properly than bright white).
Review: https://reviewboard.asterisk.org/r/3547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
........
Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When ASTERISK-23265/ASTERISK-23320 was fixed, it inadvertently led to realtime
features breaking. This was due to features loading prior to realtime. This
patch fixes this by loading features after loading dynamic modules.
ASTERISK-23487 #close
Reported by: Denis
Tested by: Denis
........
Merged revisions 412698 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
longer needed.
Add notice messages during execution that the -I command line option and
the astersik.conf internal_timing option are no longer needed. The
internal timing functionality is now always enabled if there is a timing
module loaded.
NOTE: Since the command line options and the asterisk.conf config file are
processed before the logging system is initialized, the messages are
output to stderr.
Change requested as a result of asterisk-dev list comments about the
commit for ASTERISK-22846 that removed the -I and internal_timing options.
Review: https://reviewboard.asterisk.org/r/3423/
........
Merged revisions 411964 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411974 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411985 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
module is loaded.
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 409361 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 409362 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 409363 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It is possible to pre-load pbx_config. As a result, pbx_config - which will
load and parse the dialplan - will attempt to use various dialplan components,
such as device state providers and presence state providers, prior to them
being initialized by the core. This would lead to a crash, as the components
had not created their Stasis cache entries.
This patch moves a number of core component initializations before the module
pre-load. This guarantees that if someone does pre-load pbx_config - or other
pbx modules - that the Stasis caches for the various core components are
created.
(closes issue ASTERISK-23320)
Reported by: xrobau
(closes issue ASTERISK-23265)
Reported by: Andrew Nagy
Tested by: Andrew Nagy, Rusty Newton
........
Merged revisions 408855 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Even since the fixes of AST-2013-007, Asterisk prints the following
warning on startup if the user decided to live dangerously:
Privilege escalation protection disabled!
See https://wiki.asterisk.org/wiki/x/1gKfAQ for more details.
This message is intended for the logs and interactive startup. No need
for it to appear on a remote console. This commit removes it from there.
(closes issue ASTERISK-23084)
Review: https://reviewboard.asterisk.org/r/3101/
........
Merged revisions 404861 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 404888 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404911 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 404006 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404009 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
Also, the ABI was changed to something more reasonable, since Asterisk
12 does not yet have a public release.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403959 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Several places in the code were using wait4 while other places were using
waitpid. This change makes all places use waitpid in order to make things
more consistent and since the 'rusage' object passed in/out of wait4 was
never used.
(closes issue ASTERISK-22557)
Reported by: YvesGael
Patches:
asterisk-11.5.1-wait4.patch uploaded by hurdman (license 6537)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|