Age | Commit message (Collapse) | Author |
|
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
OBJ_CONTINUE was a strange feature that came into the world under
suspicious circumstances to support an abuse of the ao2_container by
chan_iax2. Since chan_iax2 no longer uses OBJ_CONTINUE, it is safe to
remove it.
The simplified code should help performance slightly and make
understanding the code easier.
Review: https://reviewboard.asterisk.org/r/2887/
........
Merged revisions 399937 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Made ao2_unlink to protect itself from stray OBJ_SEARCH_xxx values
passed in.
........
Merged revisions 399749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If MALLOC_DEBUG is enabled, then the debug destructor for the container
is used, which would erroneously write to /tmp/refs. This patch only
uses the debug destructor if ref_debug is used.
(closes issue ASTERISK-22536)
........
Merged revisions 399098 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 399099 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399100 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Make ao2_bt() not use single char variable names.
* Fix ao2_bt() formatting.
........
Merged revisions 398498 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This moves ast_str_container_alloc, ast_str_container_add,
ast_str_container_remove, and related private functions into
strings.c/h since they really don't belong in astobj2.c/h.
As a result of this move, utils also had to be updated.
Review: https://reviewboard.asterisk.org/r/2719/
(closes issue ASTERISK-22041)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows astmm to access the backtrace generation code in Asterisk.
When memory is allocated, a backtrace is created and stored with the memory
region that tracks the allocation. If a memory corruption is detected, the
backtrace is printed to the astmm log. The backtrace will make use of the
BETTER_BACKTRACES build option if available.
As a result, this patch moves the backtrace generation code into its own file
and uses the non-wrapped versions of the C library memory allocation routines.
This allows the memory allocation code to safely use the backtrace generation
routines without infinitely recursing.
Review: https://reviewboard.asterisk.org/r/2567
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The debug versions of ao2_ref() should only be used if REF_DEBUG is
enabled so nothing is written to /tmp/refs unexpectedly.
(closes issue ASTERISK-21785)
Reported by: abelbeck
Patches:
jira_asterisk_21785_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: abelbeck
........
Merged revisions 388700 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The pimp_my_sip branch is being merged at this point because
it offers basic functionality, and from an API standpoint, things
are complete.
SIP work is *not* feature-complete; however, with the completion
of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have
been created, and thus it is possible for developers to attempt
to create new SIP work.
API documentation can be found in the doxygen in the code, but
usability documentation is still lacking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
OBJ_PARTIAL_KEY searching a rbtree did not find all possible matches if
the container did not accept duplicates.
Added matching node bias to indicate which matching node is being searched
for: first, last, any.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Put the external obj pointer in the message instead of the internal version.
........
Merged revisions 379963 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379964 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379966 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Add red-black tree container type.
* Add CLI command "astobj2 container dump <name>"
* Added ao2_container_dump() so the container could be dumped by other
modules for debugging purposes.
* Changed ao2_container_stats() so it can be used by other modules like
ao2_container_check() for debugging purposes.
* Updated the unit tests to check red-black tree containers.
(closes issue ASTERISK-19970)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2110/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Make container nodes not show up in the ref debug log.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Richard pointed out two problems with the check-in from r374177:
* The ast_msg_shutdown function declaration doesn't match the prototype
in main/message.c.
* The ref/alloc function usage in astobj2 (in trunk) can use the ao2_t_*
variants of the functions to allow the REF_DEBUG flag to enable/disable
their debug counterparts.
........
Merged revisions 374210 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374211 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch resolves a number of ref leaks that occur primarily on Asterisk
shutdown. It adds a variety of shutdown routines to core portions of
Asterisk such that they can reclaim resources allocate duringd initialization.
Review: https://reviewboard.asterisk.org/r/2137
........
Merged revisions 374177 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374178 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374196 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The new API allows for sorted containers, insertion options, duplicate
handling options, and traversal order options.
* Adds the ability for containers to be sorted when they are created.
* Adds container creation options to handle duplicates when they are
inserted.
* Adds container creation option to insert objects at the beginning or end
of the container traversal order.
* Adds OBJ_PARTIAL_KEY to allow searching with a partial key. The partial
key works similarly to the OBJ_KEY flag. (The real search speed
improvement with this flag will come when red-black trees are added.)
* Adds container traversal and iteration order options: Ascending and
Descending.
* Adds an AST_DEVMODE compile feature to check the stats and integrity of
registered containers using the CLI "astobj2 container stats <name>" and
"astobj2 container check <name>". The channels container is normally
registered since it is one of the most important containers in the system.
* Adds ao2_iterator_restart() to allow iteration to be restarted from the
beginning.
* Changes the generic container object to have a v_method table pointer to
support other types of containers.
* Changes the container nodes holding objects to be ref counted.
The ref counted nodes and v_method table pointer changes pave the way to
allow other types of containers.
* Includes a large astobj2 unit test enhancement that tests the new
features.
(closes issue ASTERISK-19969)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2078/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Using astobj2 does not require linkedlists.h be included even though
astob2 uses linked lists internally.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This framework adds a way to register the various options in a config
file with Asterisk and to handle loading and reloading of that config
in a consistent and atomic manner.
Review: https://reviewboard.asterisk.org/r/1873/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1921/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-19755)
Reported by: Gunther Kelleter
Patches:
ao2_ref.patch (license #6372) patch uploaded by Gunther Kelleter
........
Merged revisions 364902 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364903 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Rename astobj2 API parameter funcname to func.
* Rename astobj2 API iterator parameter to iter.
* Update some documentation for OBJ_MULTIPLE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add the ability to specify what kind of locking an ao2 object has when it
is allocated. The locking could be one of: MUTEX, RWLOCK, or none.
New API:
ao2_t_alloc_options()
ao2_alloc_options()
ao2_t_container_alloc_options()
ao2_container_alloc_options()
ao2_rdlock()
ao2_wrlock()
ao2_tryrdlock()
ao2_trywrlock()
The OBJ_NOLOCK and AO2_ITERATOR_DONTLOCK flags have a slight meaning
change. They no longer mean that the object is protected by an external
mechanism. They mean the lock associated with the object has already been
manually obtained by one of the ao2_lock calls. This change is necessary
for RWLOCK support since they are not reentrant. Also an operation on an
ao2 container may require promoting a read lock to a write lock by
releasing the already held read lock to re-acquire as a write lock.
Replaced API calls:
ao2_t_link_nolock()
ao2_link_nolock()
ao2_t_unlink_nolock()
ao2_unlink_nolock()
with the respective
ao2_t_link_flags()
ao2_link_flags()
ao2_t_unlink_flags()
ao2_unlink_flags()
API calls to be more flexible and to allow an anticipated enhancement to
control linking duplicate objects into a container.
The changes to format.c and format_cap.c are taking advantange of the new
ao2 locking options to simplify the use of the format capabilities
containers.
Review: https://reviewboard.asterisk.org/r/1554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reported by: wdoekes
Patched by: wdoekes
Review: https://reviewboard.asterisk.org/r/1539/
........
Merged revisions 342487 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342488 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There is a fairly common pattern making its way through the code base where we
put a temporary object on the stack so we can call ao2_find() with OBJ_POINTER.
The purpose is so that it can be passed into the object hash function.
However, this really seems like a hack and potentially error prone. This patch
is a first stab at approach to avoid having to do that.
It adds a new flag, OBJ_KEY, which can be used instead of OBJ_POINTER in these
situations. Then, the hash function can know whether it was given an object or
some custom data to hash.
The patch also changes some uses of ao2_find() for iax2_user and iax2_peer
objects to reflect how OBJ_KEY would be used.
So long, and thanks for all the fish.
Review: https://reviewboard.asterisk.org/r/1184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Moving a found object to the front of its bucket to reduce the necessary traversal steps to find an object. This change improves the search time on large system with many data or in link lists.
(closes issue #19233)
Reported by: schmidts
Review: https://reviewboard.asterisk.org/r/1201/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307273 | jpeeler | 2011-02-09 15:06:33 -0600 (Wed, 09 Feb 2011) | 8 lines
Add missing debug info for ao2_link for use with REF_DEBUG in ao2 callback.
(closes issue #18758)
Reported by: rgagnon
Patches:
branch-1.8-r306540-astobj-fix.diff uploaded by rgagnon (license 1202)
trunk-r306540-astobj-fix.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302267 | russell | 2011-01-18 14:19:57 -0600 (Tue, 18 Jan 2011) | 5 lines
Don't enable AO2_DEBUG by default if AST_DEVMODE is on.
AO2_DEBUG is not important and is causing a false compiler warning to be
generated on my Ubuntu Natty dev box.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
As pointed out by 'akshayb' on #asterisk-dev, the code here called a list of
bucket entries a 'bucket', and the entries within the bucket were called
'bucket_list'. This made the code very hard to understand without reading
all of it... so I've renamed 'bucket_list' to 'bucket_entry' to clarify the
purpose of the structure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
internal_ao2_ref uses INTERNAL_OBJ which mzy report 'bad magic number', but
internal_ao2_ref continues on, causing segfault.
Although AO2_MAGIC number is checked by INTERNAL_OBJ before internal_ao2_ref is
called, A02_MAGIC is being destroyed (or a wrong pointer) by the time
internal_ao2_ref uses INTERNAL_OBJ.
internal_ao2_ref now returns -1 if INTERNAL_OBJ encouters a bad magic number.
(issue #17037)
Reported by: alecdavis
Patches:
bug17037.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A bug was discovered during the creation of the astobj2 unit test.
When OBJ_MULTIPLE | OBJ_UNLINK is used, the objects being returned
had a ref count issue. This patch resolves that.
Review: https://reviewboard.asterisk.org/r/496/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When OBJ_MULTIPLE was off but OBJ_UNLINK was on, all the items in a bucket
were being unlinked instead of just the first match. This fixes that.
Review: https://reviewboard.asterisk.org/r/490/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245147 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ao2_iterator_destroy was not being used on the
iterator during the test. This resulted in the
container never actually being destroyed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There is an issue which only affects trunk and the new ao2_callback OBJ_MULTIPLE
implementation. When both OBJ_MULTIPLE and OBJ_NODATA are passed, only the first
object is visited, regardless of what is returned by the specified callback. This
causes a problem when we are clearing a container, i.e.:
ao2_callback(container, OBJ_UNLINK | OBJ_NODATA | OBJ_MULTIPLE, NULL, NULL);
Only unlinks the first object. This patch resolves this.
(closes issue #16564)
Reported by: pj
Patches:
issue16564_20100111.diff uploaded by seanbright (license 71)
Tested by: pj, seanbright
Review: https://reviewboard.asterisk.org/r/457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The code committed in revision 225405 was broken; instead of removing the unreference code,
the logic used to decide when to do it should have been reversed. This patch corrects the
situation, and makes reference counting work properly again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|