| Age | Commit message (Collapse) | Author |
|---|
|
The bridge holds onto the old channel video source after it's been
released. This can lead to use after free errors.
ASTERISK-27229 #close
Change-Id: Ib2dab61677dd8a21f7ad53cdc9b8ca93297838b3
|
|
When a channel that is on hold gets added to a bridge by
the Bridge AMI action or the dialplan application of the same name,
music continues to play, causing "robotic sound".
This commit adds a call to ast_moh_stop to stop the music.
Also, it makes the AMI Park action use the right MOH class when the
channel gets parked.
Reported by: Zane Conkle
ASTERISK-25079 #close
Change-Id: I4b129c5a20c15e63968842460ac5a1a85903cf9f
|
|
If an error occurs during a bridge impart it's possible that
the "bridge_after" callback might try to run before
control_swap_channel_in_bridge has been signalled to continue.
Since control_swap_channel_in_bridge is holding the control lock
and the callback needs it, a deadlock will occur.
* control_swap_channel_in_bridge now only holds the control
lock while it's actually modifying the control structure and
releases it while the bridge impart is running.
* bridge_after_cb is now tolerant of impart failures.
Change-Id: Ifd239aa93955b3eb475521f61e284fcb0da2c3b3
|
|
unlocked" into 13
|
|
In an earlier version of Asterisk a local channel [un]lock all functions were
added in order to keep a crash from occurring when a channel hung up too early
during an attended transfer. Unfortunately, when a transfer failure occurs and
depending on the timing, the local channels sometime do not get properly
unlocked and deref'ed after being locked and ref'ed. This happens because the
underlying local channel structure gets NULLed out before unlocking.
This patch reworks those [un]lock functions and makes sure the values that get
locked and ref'ed later get unlocked and deref'ed.
ASTERISK-27074 #close
Change-Id: Ice96653e29bd9d6674ed5f95feb6b448ab148b09
|
|
If an attended transfer failed it was possible for some of the channels
involved to get "stuck" because Asterisk was not hanging up the transfer target.
This patch ensures Asterisk hangs up the transfer target when an attended
transfer failure occurs.
ASTERISK-27075 #close
Change-Id: I98a6ecd92d3461ab98c36f0d9451d23adaf3e5f9
|
|
This change adds a deferred queue to bridging. If a bridge
technology determines that a frame can not be written and
should be deferred it can indicate back to bridging to do so.
Bridging will then requeue any deferred frames upon a new
channel joining the bridge.
This change has been leveraged for T.38 request negotiate
control frames. Without the deferred queue there is a race
condition between the bridge receiving the T.38 request
negotiate and the second channel joining and being in the
bridge. If the channel is not yet in the bridge then the T.38
negotiation fails.
A unit test has also been added that confirms that a T.38
request negotiate control frame is deferred when no other
channel is in the bridge and that it is requeued when a new
channel joins the bridge.
ASTERISK-26923
Change-Id: Ie05b08523f399eae579130f4a5f562a344d2e415
|
|
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/asterisk: Correct and extend completions for 'core show file
version.'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
|
|
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
|
|
It's actually quite useful to see the source of a video stream change.
This doesn't happen terribly often, even with talk detection - but when
it does, it's nice to know which channel is now providing your video
stream.
As a verbose 5 level message, it shouldn't be terribly spammy or costly
to have, and is 'lower level' then most other verbose messages that the
bridge system emits.
ASTERISK-26555
Change-Id: Ia1c20ecafa9670171fd38bddcf3beccae47fb15c
|
|
Change-Id: I67e6b79fa3102e494b5fe6cc7510472249080e85
|
|
* changes:
Bridge system: Fix memory leaks and double frees on impart failure.
bridge_softmix.c: Fix crash if channel fails to join mixing tech.
|
|
You cannot reference the passed in features struct after calling
ast_bridge_impart(). Even if the call fails.
Change-Id: I902b88ba0d5d39520e670fb635078a367268ea21
|
|
softmix_bridge_join() failed because of an allocation failure. To address
this, the softmix bridge technology now checks if the channel failed to
join softmix successfully. In addition, the bridge now begins the process
of kicking the channel out of the bridge so we don't have channels
partially in the bridge for very long.
* Fix the test_channel_feature_hooks.c unit tests. The test channel must
have a valid codec to join the simple_bridge technology. This patch makes
joining a bridge more strict by not allowing partially joined channels to
remain in the bridge.
Change-Id: I97e2ade6a2bcd1214f24fb839fda948825b61a2b
|
|
An earlier patch blocked the ast_bridge_impart() call until the channel
either entered the target bridge or it failed. Unfortuantely, if the
target bridge is stasis and the imprted channel is not a stasis channel,
stasis bounces the channel out of the bridge to come back into the bridge
as a proper stasis channel. When the channel is bounced out, that
released the block on ast_bridge_impart() to continue. If the impart was
a result of a transfer, then it became a race to see if the swap channel
would get hung up before the imparted channel could come back into the
stasis bridge. If the imparted channel won then everything is fine. If
the swap channel gets hung up first then the transfer will fail because
the swap channel is leaving the bridge.
* Allow a chain of ast_bridge_impart()'s to happen before any are
unblocked to prevent the race condition described above. When the channel
finally joins the bridge or completely fails to join the bridge then the
ast_bridge_impart() instances are unblocked.
ASTERISK-25947
Reported by: Richard Mudgett
ASTERISK-24649
Reported by: John Bigelow
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I8fef369171f295f580024ab4971e95c799d0dde1
|
|
It's possible for the transferer channel to get hung up early during the
attended transfer process. For instance, a phone may send a "bye" immediately
upon receiving a sip notify that contains a sip frag 100 (I'm looking at you
Jitsi). When this occurs a race begins between the transferer being hung up
and completion of the transfer code.
If the channel hangs up too early during a transfer involving stasis bridging
for instance, then when the created local channel goes to look up its swap
channel (and associated datastore) it can't find it (since it is no longer in
the bridge) thus it fails to enter the stasis application. Consequently, the
created local channel(s) hang up as well. If the timing is just right then the
bridging code attempts to add the message link with missing local channel(s).
Hence the crash.
Unfortunately, there is no great way to solve the problem of the unexpected
"bye". While we can't guarantee we won't receive an early hangup, and in this
case still fail to enter the stasis application, we can make it so asterisk
does not crash.
This patch does just that by locking the local channel structure, checking
that the local channel's peer has not been lost, and then continuing. This
keeps the local channel's peer from being ripped out from underneath it by
the local/unreal hangup code while attempting to set the stasis message link.
ASTERISK-25771
Change-Id: Ie6d6061e34c7c95f07116fffac9a09e5d225c880
|
|
Local channel optimization could cause DTMF digits to be duplicated.
Pending DTMF end events would be posted to a bridge when the local channel
optimizes out and is replaced by the channel further down the chain. When
the real digit ends, the channel would get another DTMF end posted to the
bridge.
A -- LocalA;1/n -- LocalA;2/n -- LocalB;1 -- LocalB;2 -- B
1) LocalA has the /n flag to prevent optimization.
2) B is sending DTMF to A through the local channel chain.
3) When LocalB optimizes out it can move B to the position of LocalB;1
4) Without this patch, when B swaps with LocalB;1 then LocalB;1 would
settle an owed DTMF end to the bridge toward LocalA;2.
5) When B finally ends its DTMF it sends the DTMF end down the chain.
6) Without this patch, A would hear the DTMF digit end when LocalB
optimizes out and when B ends the original digit.
ASTERISK-25582
Change-Id: I1bbd28b8b399c0fb54985a5747f330a4cd2aa251
|
|
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
|
|
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
|
|
After completing an attended transfer the transfer target channel was not being
hung up after leaving the bridge. Added an explicit softhangup to hangup said
channel, but only if it was previously bridged.
ASTERISK-24782 #close
Reported by: John Bigelow
Change-Id: Idde9543d56842369384a5e8c00d72a22bbc39ada
|
|
Due to a race condition there was a chance that during an attended transfer the
channel's application would return NULL. This, of course, would cause a crash
when attempting to access the memory. This patch retrieves the channel's app
at an earlier time in processing in hopes that the app name is available.
However, if it is not then "unknown" is used instead. Since some string value
is now always present the crash can no longer occur.
ASTERISK-24869 #close
Reported by: viniciusfontes
Review:
Change-Id: I5134b84c4524906d8148817719d76ffb306488ac
|
|
operation.
When a channel enters the bridging system it is first made compatible with
the bridge and then the bridge technology makes the channel compatible
with the technology. For all but the DAHDI native and softmix bridge
technologies the make channel compatible with the bridge step is an
effective noop because the other technologies allow all audio formats.
For the DAHDI native bridge technology it doesn't matter because it is not
an initial bridge technology and chan_dahdi allows only one native format
per channel. For the softmix bridge technology, it is a noop at best and
harmful at worst because the wrong translation path could be setup if the
channel's native formats allow more than one audio format.
This is an intermediate patch for a series of patches aimed at improving
translation path choices.
* Removed code dealing with the unnecessary step of making the channel
compatible with the bridge.
ASTERISK-24841
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4600/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
After completing an attended transfer the transfer target channel (the one that
gets swapped out) was not being hung up after leaving the bridge. This resulted
in a channel possibly being left around. Added an explicit softhangup for the
channel in question after the transfer is successfully completed in order to
make sure the channel is hung up.
ASTERISK-24782 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4575/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When swapping a Local channel in place of one already
in a bridge (to complete a bridge attended transfer),
the channel that was swapped out can actually be hung
up before the stasis bridge push callback executes on
the independant transfer thread. This results in the
stasis app loop dropping out and removing the control
that has the the app name which the local replacement
channel needs so it can re-enter stasis.
To avoid this race condition a new push_peek callback
has been added, and called from the ast_bridge_impart
thread before it launches the independant thread that
will complete the transfer. Now the stasis push_peek
callback can copy the stasis app name before the swap
channel can hang up.
ASTERISK-24649
Review: https://reviewboard.asterisk.org/r/4382/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When code imparts a channel into a bridge to swap with another channel, a
ref needs to be held on the swap channel to ensure that it cannot
dissapear before finding it in the bridge.
* The ast_bridge_join() swap channel parameter now always steals a ref for
the swap channel. This is the only change to the bridge framework's
public API semantics.
* bridge_channel_internal_join() now requires the bridge_channel->swap
channel to pass in a ref.
ASTERISK-24649
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4354/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Any partially collected DTMF digits for a DTMF hook need to be pushed into
the bridge when a channel leaves the bridging system as if there were a
timeout.
Review: https://reviewboard.asterisk.org/r/4199/
........
Merged revisions 428601 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a channel is imparted to a bridge, the invocation of the function may
provide an ast_bridge_features struct. Upon passing this to ast_bridge_impart,
the caller must assume that ownership has passed to the function, as in all
paths the function destroys the struct prior to returning (as its purpose is
to configure the behavior of the channel while in the bridge). On one off
nominal path - where the channel already has a PBX thread - the struct was not
being destroyed.
This patch fixes that glitch.
ASTERISK-24437 #close
Reported by: Scott Griepentrog
........
Merged revisions 426431 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the old technology.
When a smart bridge operation occurs and a bridge transitions from one
technology to another the old technology is provided the channels formerly
in it and told that they are leaving. Unfortunately the bridge provided
along with them is incomplete. The bridge, despite there being channels in it,
contains none. This forces technology implementations to have additional
logic when channels are leaving or to store their own duplicated
state.
This change makes the bridge more complete so it contains the expected
channels. Now that the bridge is complete special logic within
bridge_native_rtp is no longer needed and has been removed.
Review: https://reviewboard.asterisk.org/r/4057/
........
Merged revisions 425242 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421645 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
publishing transfer information.
........
Merged revisions 420387 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This fixes a class of issues where Stasis applications were not made
aware that their channels were being manipulated or replaced by
external entitiessuch as transfers, AMI commands, or dialplan
applications such as Bridge(). Inconsistent information such as
StasisEnd events with unknown channels as a result of masquerades has
also been corrected. To accomplish these fixes, several new fields
were added to blind and attended transfer messages as well as
StasisStart and BridgeAttendedTransfer Stasis events.
ASTERISK-23941 #close
Review: https://reviewboard.asterisk.org/r/3865/
Review: https://reviewboard.asterisk.org/r/3857/
Review: https://reviewboard.asterisk.org/r/3852/
Review: https://reviewboard.asterisk.org/r/3816/
Review: https://reviewboard.asterisk.org/r/3731/
Review: https://reviewboard.asterisk.org/r/3729/
Review: https://reviewboard.asterisk.org/r/3728/
........
Merged revisions 420325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to "bridge kick".
The "bridge destroy" CLI command is invasive to bridges and can leave them in an unexpected
state for the users of them. Since this command may be useful for developers it is now
only available when developer mode is available. To take its place "all" has been added
as a valid option to the "bridge kick" CLI command. It will kick all of the channels
in the bridge out.
ASTERISK-23987
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3840/
........
Merged revisions 419536 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In the old times media formats were represented using a bit field. This was
fast but had a few limitations.
1. Asterisk was limited in how many formats it could handle.
2. Formats, being a bit field, could not include any attribute information.
A format was strictly its type, e.g., "this is ulaw".
This was changed in Asterisk 10 (see
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for
notes on that work) which led to the creation of the ast_format structure.
This structure allowed Asterisk to handle attributes and bundle information
with a format.
Additionally, ast_format_cap was created to act as a container for multiple
formats that, together, formed the capability of some entity. Another
mechanism was added to allow logic to be registered which performed format
attribute negotiation. Everywhere throughout the codebase Asterisk was
changed to use this strategy.
Unfortunately, in software, there is no free lunch. These new capabilities
came at a cost.
Performance analysis and profiling showed that we spend an inordinate
amount of time comparing, copying, and generally manipulating formats and
their related structures. Basic prototyping has shown that a reasonably
large performance improvement could be made in this area. This patch is the
result of that project, which overhauled the media format architecture
and its usage in Asterisk to improve performance.
Generally, the new philosophy for handling formats is as follows:
* The ast_format structure is reference counted. This removed a large amount
of the memory allocations and copying that was done in prior versions.
* In order to prevent race conditions while keeping things performant, the
ast_format structure is immutable by convention and lock-free. Violate this
tenet at your peril!
* Because formats are reference counted, codecs are also reference counted.
The Asterisk core generally provides built-in codecs and caches the
ast_format structures created to represent them. Generally, to prevent
inordinate amounts of module reference bumping, codecs and formats can be
added at run-time but cannot be removed.
* All compatibility with the bit field representation of codecs/formats has
been moved to a compatibility API. The primary user of this representation
is chan_iax2, which must continue to maintain its bit-field usage of formats
for interoperability concerns.
* When a format is negotiated with attributes, or when a format cannot be
represented by one of the cached formats, a new format object is created or
cloned from an existing format. That format may have the same codec
underlying it, but is a different format than a version of the format with
different attributes or without attributes.
* While formats are reference counted objects, the reference count maintained
on the format should be manipulated with care. Formats are generally cached
and will persist for the lifetime of Asterisk and do not explicitly need
to have their lifetime modified. An exception to this is when the user of a
format does not know where the format came from *and* the user may outlive
the provider of the format. This occurs, for example, when a format is read
from a channel: the channel may have a format with attributes (hence,
non-cached) and the user of the format may last longer than the channel (if
the reference to the channel is released prior to the format's reference).
For more information on this work, see the API design notes:
https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite
Finally, this work was the culmination of a large number of developer's
efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the
work in the Asterisk core, chan_sip, and was an invaluable resource in peer
reviews throughout this project.
There were a substantial number of patches contributed during this work; the
following issues/patch names simply reflect some of the work (and will cause
the release scripts to give attribution to the individuals who work on them).
Reviews:
https://reviewboard.asterisk.org/r/3814
https://reviewboard.asterisk.org/r/3808
https://reviewboard.asterisk.org/r/3805
https://reviewboard.asterisk.org/r/3803
https://reviewboard.asterisk.org/r/3801
https://reviewboard.asterisk.org/r/3798
https://reviewboard.asterisk.org/r/3800
https://reviewboard.asterisk.org/r/3794
https://reviewboard.asterisk.org/r/3793
https://reviewboard.asterisk.org/r/3792
https://reviewboard.asterisk.org/r/3791
https://reviewboard.asterisk.org/r/3790
https://reviewboard.asterisk.org/r/3789
https://reviewboard.asterisk.org/r/3788
https://reviewboard.asterisk.org/r/3787
https://reviewboard.asterisk.org/r/3786
https://reviewboard.asterisk.org/r/3784
https://reviewboard.asterisk.org/r/3783
https://reviewboard.asterisk.org/r/3778
https://reviewboard.asterisk.org/r/3774
https://reviewboard.asterisk.org/r/3775
https://reviewboard.asterisk.org/r/3772
https://reviewboard.asterisk.org/r/3761
https://reviewboard.asterisk.org/r/3754
https://reviewboard.asterisk.org/r/3753
https://reviewboard.asterisk.org/r/3751
https://reviewboard.asterisk.org/r/3750
https://reviewboard.asterisk.org/r/3748
https://reviewboard.asterisk.org/r/3747
https://reviewboard.asterisk.org/r/3746
https://reviewboard.asterisk.org/r/3742
https://reviewboard.asterisk.org/r/3740
https://reviewboard.asterisk.org/r/3739
https://reviewboard.asterisk.org/r/3738
https://reviewboard.asterisk.org/r/3737
https://reviewboard.asterisk.org/r/3736
https://reviewboard.asterisk.org/r/3734
https://reviewboard.asterisk.org/r/3722
https://reviewboard.asterisk.org/r/3713
https://reviewboard.asterisk.org/r/3703
https://reviewboard.asterisk.org/r/3689
https://reviewboard.asterisk.org/r/3687
https://reviewboard.asterisk.org/r/3674
https://reviewboard.asterisk.org/r/3671
https://reviewboard.asterisk.org/r/3667
https://reviewboard.asterisk.org/r/3665
https://reviewboard.asterisk.org/r/3625
https://reviewboard.asterisk.org/r/3602
https://reviewboard.asterisk.org/r/3519
https://reviewboard.asterisk.org/r/3518
https://reviewboard.asterisk.org/r/3516
https://reviewboard.asterisk.org/r/3515
https://reviewboard.asterisk.org/r/3512
https://reviewboard.asterisk.org/r/3506
https://reviewboard.asterisk.org/r/3413
https://reviewboard.asterisk.org/r/3410
https://reviewboard.asterisk.org/r/3387
https://reviewboard.asterisk.org/r/3388
https://reviewboard.asterisk.org/r/3389
https://reviewboard.asterisk.org/r/3390
https://reviewboard.asterisk.org/r/3321
https://reviewboard.asterisk.org/r/3320
https://reviewboard.asterisk.org/r/3319
https://reviewboard.asterisk.org/r/3318
https://reviewboard.asterisk.org/r/3266
https://reviewboard.asterisk.org/r/3265
https://reviewboard.asterisk.org/r/3234
https://reviewboard.asterisk.org/r/3178
ASTERISK-23114 #close
Reported by: mjordan
media_formats_translation_core.diff uploaded by kharwell (License 6464)
rb3506.diff uploaded by mjordan (License 6283)
media_format_app_file.diff uploaded by kharwell (License 6464)
misc-2.diff uploaded by file (License 5000)
chan_mild-3.diff uploaded by file (License 5000)
chan_obscure.diff uploaded by file (License 5000)
jingle.diff uploaded by file (License 5000)
funcs.diff uploaded by file (License 5000)
formats.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
bridges.diff uploaded by file (License 5000)
mf-codecs-2.diff uploaded by file (License 5000)
mf-app_fax.diff uploaded by file (License 5000)
mf-apps-3.diff uploaded by file (License 5000)
media-formats-3.diff uploaded by file (License 5000)
ASTERISK-23715
rb3713.patch uploaded by coreyfarrell (License 5909)
rb3689.patch uploaded by mjordan (License 6283)
ASTERISK-23957
rb3722.patch uploaded by mjordan (License 6283)
mf-attributes-3.diff uploaded by file (License 5000)
ASTERISK-23958
Tested by: jrose
rb3822.patch uploaded by coreyfarrell (License 5909)
rb3800.patch uploaded by jrose (License 6182)
chan_sip.diff uploaded by mjordan (License 6283)
rb3747.patch uploaded by jrose (License 6182)
ASTERISK-23959 #close
Tested by: sgriepentrog, mjordan, coreyfarrell
sip_cleanup.diff uploaded by opticron (License 6273)
chan_sip_caps.diff uploaded by mjordan (License 6283)
rb3751.patch uploaded by coreyfarrell (License 5909)
chan_sip-3.diff uploaded by file (License 5000)
ASTERISK-23960 #close
Tested by: opticron
direct_media.diff uploaded by opticron (License 6273)
pjsip-direct-media.diff uploaded by file (License 5000)
format_cap_remove.diff uploaded by opticron (License 6273)
media_format_fixes.diff uploaded by opticron (License 6273)
chan_pjsip-2.diff uploaded by file (License 5000)
ASTERISK-23966 #close
Tested by: rmudgett
rb3803.patch uploaded by rmudgetti (License 5621)
chan_dahdi.diff uploaded by file (License 5000)
ASTERISK-24064 #close
Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose
rb3814.patch uploaded by rmudgett (License 5621)
moh_cleanup.diff uploaded by opticron (License 6273)
bridge_leak.diff uploaded by opticron (License 6273)
translate.diff uploaded by file (License 5000)
rb3795.patch uploaded by rmudgett (License 5621)
tls_fix.diff uploaded by mjordan (License 6283)
fax-mf-fix-2.diff uploaded by file (License 5000)
rtp_transfer_stuff uploaded by mjordan (License 6283)
rb3787.patch uploaded by rmudgett (License 5621)
media-formats-explicit-translate-format-3.diff uploaded by file (License 5000)
format_cache_case_fix.diff uploaded by opticron (License 6273)
rb3774.patch uploaded by rmudgett (License 5621)
rb3775.patch uploaded by rmudgett (License 5621)
rtp_engine_fix.diff uploaded by opticron (License 6273)
rtp_crash_fix.diff uploaded by opticron (License 6273)
rb3753.patch uploaded by mjordan (License 6283)
rb3750.patch uploaded by mjordan (License 6283)
rb3748.patch uploaded by rmudgett (License 5621)
media_format_fixes.diff uploaded by opticron (License 6273)
rb3740.patch uploaded by mjordan (License 6283)
rb3739.patch uploaded by mjordan (License 6283)
rb3734.patch uploaded by mjordan (License 6283)
rb3689.patch uploaded by mjordan (License 6283)
rb3674.patch uploaded by coreyfarrell (License 5909)
rb3671.patch uploaded by coreyfarrell (License 5909)
rb3667.patch uploaded by coreyfarrell (License 5909)
rb3665.patch uploaded by mjordan (License 6283)
rb3625.patch uploaded by coreyfarrell (License 5909)
rb3602.patch uploaded by coreyfarrell (License 5909)
format_compatibility-2.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows the current owner of a channel to define various
feature hooks to be made available once the channel has entered a
bridge. This includes any hooks that are setup on the
ast_bridge_features struct such as DTMF hooks, bridge event hooks
(join, leave, etc.), and interval hooks.
Review: https://reviewboard.asterisk.org/r/3649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 416732 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 416733 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 416734 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses some aesthetic issues in Asterisk. These are all just
minor tweaks to improve the look of the CLI when used in a variety of
settings. Specifically:
* A number of chatty verbose messages were removed or demoted to DEBUG
messages. Verbose messages with a verbosity level of 5 or higher were -
if kept as verbose messages - demoted to level 4. Several messages
that were emitted at verbose level 3 were demoted to 4, as announcement
of dialplan applications being executed occur at level 3 (and so the
effects of those applications should generally be less).
* Some verbose messages that only appear when their respective 'debug'
options are enabled were bumped up to always be displayed.
* Prefix/timestamping of verbose messages were moved to the verboser
handlers. This was done to prevent duplication of prefixes when the
timestamp option (-T) is used with the CLI.
* Verbose magic is removed from messages before being emitted to
non-verboser handlers. This prevents the magic in multi-line verbose
messages (such as SIP debug traces or the output of DumpChan) from
being written to files.
* _Slightly_ better support for the "light background" option (-W) was
added. This includes using ast_term_quit in the output of XML
documentation help, as well as changing the "Asterisk Ready" prompt to
bright green on the default background (which stands a better chance of
being displayed properly than bright white).
Review: https://reviewboard.asterisk.org/r/3547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
PJSIP would never send the final 200 Notify for a blind transfer
when transferring to parking. This patch fixes that. In addition,
it fixes a reference leak when performing blind transfers to
non-bridging extensions.
Review: https://reviewboard.asterisk.org/r/3485/
........
Merged revisions 414400 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
........
Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When bridge locking was added for bridge snapshot creation, some
locations where bridge locking was added were not guaranteed to
actually have a bridge and locking NULL AO2 objects tends to cause
segfaults. This ensures that NULL bridges aren't locked.
........
Merged revisions 413073 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
While the vast majority of bridge snapshot creation is locked properly,
there are currently some instances that are not. This adds the missing
locking to ensure bridge state is not malleable during snapshot
creation.
(closes issue ASTERISK-22904)
Review: https://reviewboard.asterisk.org/r/3415/
Reported by: Matt Jordan
........
Merged revisions 412193 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412194 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
