| Age | Commit message (Collapse) | Author |
|---|
|
........
Merged revisions 399019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Performing a blond transfer (attended transfer that is completed
before the transfer recipient picks up) externally through chan_sip
or chan_pjsip would result in lost references to the channels
involved with the transfer as well as their bridge.
(closes issue ASTERISK-22092)
Reported by: mmichelson
Review: https://reviewboard.asterisk.org/r/2766/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change protects accesses of res_parking such that it can unload
safely once transient uses of its registered functions are complete.
The parking API has been restructured such that its consumers do not
have access to the vtable exposed by the parking provider, but instead
route through stubs to prevent consumers from holding on to function
pointers.
This adds calls to all the parking unload functions and moves
application loading and unloading into functions in
parking_applications.c similar to the rest of the parts of res_parking.
Review: https://reviewboard.asterisk.org/r/2763/
(closes issue ASTERISK-22142)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
dissolving.
SIP/foo -- Local;1==Local;2 -- .... -- Local;1==Local;2 -- SIP/bar
Kick a ;1 channel and the chain toward SIP/foo goes away.
Kick a ;2 channel and the chain toward SIP/bar goes away.
This can leave a local channel chain between the kicked ;1 and ;2 channels
that are orphaned until you manually request one of those channels to
hangup or request the bridge to dissolve.
* Added ast_bridge_kick() as a companion to ast_bridge_remove(). The
functional difference is that ast_bridge_kick() may dissolve the bridge as
a result of the channel leaving the bridge.
* Made CLI "bridge kick <bridge> <channel>" use ast_bridge_kick() instead
of ast_bridge_remove() so the bridge can dissolve if needed.
* Renamed bridge_channel_handle_hangup() to ast_bridge_channel_kick() and
made it accessible to other files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The feature_attended_transfer test is failing due to Asterisk not
passing DTMF in the bridges created for internal attended transfers.
This sets the features initialization routine to set this flag by
default and adjusts the basic bridge and confbridge's use of the
bridging system accordingly as per Richard's suggestion instead of
adjusting this individual case. This change allows the necessary DTMF
to pass through the attended transfer bridge and complete the test
successfully.
Review: https://reviewboard.asterisk.org/r/2759/
(closes issue ASTERISK-22222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These problems were all caught by a test in the Asterisk Test Suite that
originated some Local channels and attempted to move the ;2 half of the Local
channel into a bridge using the Bridge AMI action.
(1) When originating a channel, the Newchannel event is emitted quickly;
however, the ;2 channel will not have a pbx thread assigned to it until
after the outbound 'dialing' for the ;1 is complete. Thus, there is a period
of time where the outside world "knows" of the channel's existence and can
influence it but Asterisk has not yet started the dialplan execution thread.
If a Bridge AMI action is taken on the channel, the channel appears to be a
Dialed channel with no PBX thread; hence, the channel will be imparted into
the Bridge by first 'yanking' the channel. At the same time, a race condition
can occur after the yank (but before entering the bridge) when ;1 answers
and starts a PBX on the ;2. The end result currently is an assertion failure
in the Bridging API, as a channel with a PBX is imparted into the Bridge.
There's no way to prevent AMI from attempting to Bridge a channel
immediately after creation; likewise, holding the channel lock through the
entire Dial operation is unwise (and impossible). Instead of treating the
presence of a PBX thread as an error, we simply bail out of the adding the
channel to the bridge through ast_bridge_impart. The Bridge action will
then fail - but we avoid a situation where the channel is both executing
a PBX thread and simultaneously being given a separate thread in the
bridging system (which would be a "bad thing"). Since imparting a channel
with a PBX *can* occur and is not a programming error, the asserts have been
removed.
(2) When the first condition occurs, we have to take one of two actions: either
hangup the yanked channel as it did not enter the bridge, or deref it
because we don't own it. We can determine if we own it or not by testing
for the presence of the PBX thread. If we hung it up directly, we'd crash.
(3) bridge_find_channel does not increase the reference count of the
ast_bridge_channel object. The RAII_VAR usage in ast_bridge_add_channel
thus created a ticking time bomb in whatever bridge the channel moved into,
as the destructor for the ast_bridge_channel object would be called.
Review: https://reviewboard.asterisk.org/r/2741/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This prevents unreal channel optimization during the prequalification
phase when either channel is involved in DTMF emulation. This prevents
a situation where an emulated digit would be missed because the
emulation was never completed.
Review: https://reviewboard.asterisk.org/r/2747/
(closes issue ASTERISK-22214)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch does the following:
* It adds support for externally initiated parking requests. In particular,
chan_skinny has a protocol level message that initiates a call park.
This patch now supports that option, as well as the protocol specific
mechanisms in chan_dahdi/sig_analog and chan_mgcp.
* A parking bridge features virtual table has been added that provides
access to the parking functionality that the Bridging API needs. This
includes requests to park an entire 'call' (with little or no additional
information, thank you chan_skinny), perform a blind transfer to a parking
extension, determine if an extension is a parking extension, as well as the
actual "do the parking" request from the Bridging API.
* Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
functions
* The removal of some - but not all - dead parking code from features.c
This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)
Review: https://reviewboard.asterisk.org/r/2710
(closes issue ASTERISK-22134)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fixed feature limits to not use special members of struct
ast_bridge_features.
* Fixed memory leak in off nominal paths of bridge_builtin_set_limits().
* Fixed off nominal path in ast_bridge_features_limits_construct() freeing
unallocated memory if it was not called by bridge_builtin_set_limits().
* Made bridge_builtin_interval_features.so unloadable.
* Simplified parking's use of its duration interval hook.
* Made BridgeWait S option not depend upon another module being loaded.
(closes issue ASTERISK-22107)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2701/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Changes arguments for BridgeWait from BridgeWait(role, options) to
BridgeWait(bridge_name, role, options). Now multiple holding bridges may
be created and referenced by this application.
(closes issue ASTERISK-21922)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2642/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
