| Age | Commit message (Collapse) | Author |
|---|
|
reexamined after a transfer.
Consider the following scenario:
/-- B
A == * == Network
\-- C
Party B calls party A (EuroISDN BRI phone)
Party A puts B on hold using the HOLD/RETRIEVE messages.
Party A calls party C.
Party A puts C on hold to talk with party B again.
Party A transfers B to C by hanging up.
The call does not get the opportunity to get re-transferred into the ISDN
network by the native bridge because native bridging is not being
reexamined after the initial transfer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When using ast_seekstream with the read/write streams of a monitor,
the number of samples we are seeking must be of the same rate as the
stream or the jump calculation will be incorrect. This patch adds logic
to correctly convert the number of samples to jump to the sample rate
the read/write stream is using.
For example, if the call is G722 (16khz) and the read/write stream is
recording a 8khz wav, seeking 320 samples of 16khz audio is not the
same as seeking 320 samples of 8khz audio when performing the ast_seekstream
on the stream.
ABE-2044
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246899 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r246545 | dvossel | 2010-02-12 17:30:17 -0600 (Fri, 12 Feb 2010) | 16 lines
lock channel during datastore removal
On channel destruction the channel's datastores are removed and
destroyed. Since there are public API calls to find and remove
datastores on a channel, a lock should be held whenever datastores are
removed and destroyed. This resolves a crash caused by a race
condition in app_chanspy.c.
(closes issue #16678)
Reported by: tim_ringenbach
Patches:
datastore_destroy_race.diff uploaded by tim ringenbach (license 540)
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r244070 | tilghman | 2010-02-01 11:46:31 -0600 (Mon, 01 Feb 2010) | 16 lines
Revert previous chan_local fix (r236981) and fix instead by destroying expired frames in the queue.
(closes issue #16525)
Reported by: kobaz
Patches:
20100126__issue16525.diff.txt uploaded by tilghman (license 14)
20100129__issue16525__1.6.0.diff.txt uploaded by tilghman (license 14)
Tested by: kobaz, atis
(closes issue #16581)
Reported by: ZX81
(closes issue #16681)
Reported by: alexr1
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r243258 | jpeeler | 2010-01-26 12:19:10 -0600 (Tue, 26 Jan 2010) | 2 lines
Remove unnecessary code in ast_read as issue 16058 has been fully solved now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The problem was the OUTGOING flag was not getting set properly on the channel,
resulting in pickup failing as ast_read thought the call was inbound. Refer to
170393 for a more verbose description as this is the same exact change.
(closes issue #16539)
Reported by: syspert
Patches:
bug16539.patch uploaded by jpeeler (license 325)
Tested by: syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue #16524)
Reported by: kobaz
(closes issue #16523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
support transfers
ast_transfer sets res to 0 if there is no technology transfer function,
but then tests for it to be negative before deciding to do an early exit.
As a result, it will will wait for an AST_CONTROL_TRANSFER message that
will never come.
(closes issue #16424)
Reported by: davidw
Patches:
Issue_16424_trunk_234134.patch uploaded by davidw (license 780)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238492 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #16161)
Reported by: may213
Patches:
core-show-channel.patch uploaded by may213 (license 454)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233092 | russell | 2009-12-04 11:12:47 -0600 (Fri, 04 Dec 2009) | 7 lines
Only do frame payload check for HOLD frames.
This code was added for helping to debug the source of invalid HOLD frames.
However, a side effect of this is that it will incorrectly report errors for
frames that have an integer payload. Make the check for this block specific
to the HOLD frame case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r231911 | jpeeler | 2009-12-01 15:29:31 -0600 (Tue, 01 Dec 2009) | 12 lines
Fix crash with invalid frame data
The crash was happening as a result of a frame containing an invalid data
pointer, but was set with data length of zero. The few times the issue was
reproduced it _seemed_ that the frame was queued properly, that is the data
pointer was set to NULL. I never could reproduce the crash so as a last resort
the crash has been fixed, but a check in __ast_read has been added to give as
much information about the source of problematic frames in the future.
(closes issue #16058)
Reported by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r231298 | tilghman | 2009-11-25 16:31:57 -0600 (Wed, 25 Nov 2009) | 2 lines
After a frame duplication failure, unlock the channel before returning.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(Closes AST-33)
Reviewboard: https://reviewboard.asterisk.org/r/368/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r228896 | lmadsen | 2009-11-09 09:37:43 -0600 (Mon, 09 Nov 2009) | 6 lines
Update WARNING message.
Update a WARNING message to give a suggested fix when encountered.
(closes issue #16198)
Reported by: atis
Tested by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r228692 | dvossel | 2009-11-06 16:33:27 -0600 (Fri, 06 Nov 2009) | 9 lines
fixes audiohook write crash occuring in chan_spy whisper mode.
After writing to the audiohook list in ast_write(), frames
were being freed incorrectly. Under certain conditions this
resulted in a double free crash.
(closes issue #16133)
Reported by: wetwired
(closes issue #16045)
Reported by: bluecrow76
Patches:
issue16045.diff uploaded by dvossel (license 671)
Tested by: bluecrow76, dvossel, habile
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reviewboard: https://reviewboard.asterisk.org/r/416/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
subaddress.
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_channel_iterator to use it.
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223225 | mnicholson | 2009-10-09 13:20:11 -0500 (Fri, 09 Oct 2009) | 8 lines
Signal timeouts by returning AST_CONTROL_RINGING when originating calls.
(closes issue #15104)
Reported by: nblasgen
Patches:
manager-timeout1.diff uploaded by mnicholson (license 96)
Tested by: nblasgen, mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Channels are stored in an ao2_container. When accessing an item within
an ao2_container the proper locking order is to first lock the container,
and then the items within it.
In ast_do_masquerade both the clone and original channel must be locked
for the entire duration of the function. The problem with this is that
it attemptes to unlink and link these channels back into the ao2_container
when one of the channel's name changes. This is invalid locking order as
the process of unlinking and linking will lock the ao2_container while
the channels are locked!!! Now, both the channels in do_masquerade are
unlinked from the ao2_container and then locked for the entire function.
At the end of the function both channels are unlocked and linked back
into the container with their new names as hash values.
This new method of requiring all channels and tech pvts to be unlocked
before ast_do_masquerade() or ast_change_name() required several
changes throughout the code base.
(closes issue #15911)
Reported by: russell
Patches:
masq_deadlock_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel, atis
(closes issue #15618)
Reported by: lmsteffan
Patches:
deadlock_local_attended_transfers_trunk.diff uploaded by dvossel (license 671)
Tested by: lmsteffan, dvossel
Review: https://reviewboard.asterisk.org/r/387/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221200 | tilghman | 2009-09-30 11:55:21 -0500 (Wed, 30 Sep 2009) | 7 lines
Avoid a potential NULL dereference.
(closes issue #15865)
Reported by: kobaz
Patches:
20090915__issue15865.diff.txt uploaded by tilghman (license 14)
Tested by: kobaz
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_channel_get_full() tries to use OBJ_POINTER to optimize name-based
channel lookups, but this will not work properly when the channel's full
name was not supplied; for name-prefix searches, there is no value in
doing a hash-based lookup, and in fact doing so could result in many
channels being skipped.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r219136 | mnicholson | 2009-09-17 09:58:39 -0500 (Thu, 17 Sep 2009) | 10 lines
Prevent a potential race condition and crash when hanging up a channel by removing the channel from the channel list before begining channel tear down.
This fix may potentially cause problems with CDR backends that access the channel a CDR is associated with via the channel list. This fix makes the channel unavabile at the time when the CDR backend is invoked. This has been documented in include/asterisk/cdr.h.
(closes issue #15316)
Reported by: vmarrone
Tested by: mnicholson
Review: https://reviewboard.asterisk.org/r/362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@219139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r214701 | tilghman | 2009-08-28 15:13:32 -0500 (Fri, 28 Aug 2009) | 8 lines
Modify comment to be a bit more accurate.
We have kept this comment around long enough, that it's pretty clear that we're
keeping the code, because changing the code would require a pretty fundamental
architectural shift. We've also taken criticism in some quarters, because it
was believed that it was referring to the code being nasty. No, the code isn't
nasty, just the operation itself is rather odd. Fixed for eternity (probably
not).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r214194 | dvossel | 2009-08-26 11:36:42 -0500 (Wed, 26 Aug 2009) | 19 lines
ast_write() ignores ast_audiohook_write() results
In ast_write(), if a channel has a list of audiohooks, those
lists are written to and the resulting frame is what ast_write()
should continue with. The problem was the returned audiohook frame
was not being handled at all, and the original frame passed
into it did not contain the mixed audio, so essentially audio
was being lost. One result of this was chan_spy's whisper
mode no longer worked. To complicate the issue, frames
passed into ast_write may either be a single frame, or a list
of frames. So, as the list of frames is processed in the
audiohook_write, the returned frames had to be added to a new
list.
(closes issue #15660)
Reported by: corruptor
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Even though the get_channel_by_name() API advertised that you could search by
name or uniqueid (just as the old API did), searching by uniqueid was not
actually implemented. This patch fixes that problem.
The ast_channel_get_full() function now makes a second search attempt by
uniqueid if the parameter was a name. The channel comparison function also
now knows how to compare by unqieueid.
Finally, a bug was fixed in passing where OBJ_POINTER was being passed in some
scenarios where it should not have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r210913 | tilghman | 2009-08-06 16:45:01 -0500 (Thu, 06 Aug 2009) | 7 lines
Because channel information can be accessed outside of the channel thread, we must lock the channel prior to modifying it.
(closes issue #15397)
Reported by: caspy
Patches:
20090714__issue15397.diff.txt uploaded by tilghman (license 14)
Tested by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Patch contributed by Mark Spencer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207360 | russell | 2009-07-20 11:26:24 -0500 (Mon, 20 Jul 2009) | 9 lines
Only do the chan->fdno check in ast_read() in a developer build.
I changed this check to only happen in a dev-mode build. I also added a
comment explaining what is going on. I also made it so that detection of
this situation does not affect ast_read() operation.
(closes issue #14723)
Reported by: seadweller
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
non-T.38-capable channels.
This change allows applications that request T.38 negotiation on a channel that
does not support it to get the proper indication that it is not supported, rather
than thinking that negotiation was started when it was not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
application and channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202496 | russell | 2009-06-22 15:08:53 -0500 (Mon, 22 Jun 2009) | 4 lines
Report CallerID change during a masquerade.
Reported by: markster
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@202497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201450 | mmichelson | 2009-06-17 14:59:31 -0500 (Wed, 17 Jun 2009) | 9 lines
Change the datastore traversal in ast_do_masquerade to use a safe list traversal.
It is possible for datastore fixup functions to remove the datastore from the list
and free it. In particular, the queue_transfer_fixup in app_queue does this. While
I don't yet know of this causing any crashes, it certainly could.
Found while discussing a separate issue with Brian Degenhardt.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200360 | mmichelson | 2009-06-12 14:06:41 -0500 (Fri, 12 Jun 2009) | 10 lines
Suppress a warning message and give a better return code when generating
inband ringing after a call is answered.
(closes issue #15158)
Reported by: madkins
Patches:
15158.patch uploaded by mmichelson (license 60)
Tested by: madkins
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When allocating the channel use ao2_ref(-1) to release it, instead of calling
ast_free().
Also avoid freeing structures inside that channel (on error) if they will be
released by the channel destructor being called if the reference counter reachs
0.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Also I removed an unnecessary free of a cid_name. This will be freed properly
in the channel destructor.
Reported by mnicholson in #asterisk-dev.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The function ast_call_forward() forwards a call to an extension specified in an ast_channel's call_forward string. After an ast_channel is called, if the channel's call_forward string is set this function can be used to forward the call to a new channel and terminate the original one. I have included this api call in both channel.c's ast_request_and_dial() and feature.c's feature_request_and_dial(). App_dial and app_queue already contain call forward logic specific for their application and options.
(closes issue #13630)
Reported by: festr
Review: https://reviewboard.asterisk.org/r/271/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When connected line updates are received or generated in the middle
of an application call, it is now possible to execute a macro to
manipulate the connected line data. This way, phone numbers may be
manipulated to be more presentable to users, names may be changed
for...whatever reason, or whatever else needs to be done may be.
Review: https://reviewboard.asterisk.org/r/256
AST-165
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
