| Age | Commit message (Collapse) | Author |
|---|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173211 | jpeeler | 2009-02-03 15:57:01 -0600 (Tue, 03 Feb 2009) | 17 lines
Parking attempts made to one end of a bridge no longer will hang up due to a
parking failure.
Parking attempts made using either one-touch, or doing either a blind or
assisted transfer to the parking extension now keep up the bridge instead of
hanging up the attempted parked party. Normal causes for the parking attempt
to fail includes the specific specified extension (via PARKINGEXTEN) not being
available or if all the parking spaces are currently in use. To avoid having
to reverse a masquerade park_space_reserve was made to provide foresight if
a parking attempt will succeed and if so reserve the parking space.
(closes issue #13494)
Reported by: mdu113
Reviewed by Russell: http://reviewboard.digium.com/r/133/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173066 | twilson | 2009-02-02 17:48:06 -0600 (Mon, 02 Feb 2009) | 2 lines
Fix a feature inheritance bug I added after code review
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
reviewboard this before committing again...
reopened 11583 until all Russell's issues are
resolved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172929 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to be used within the dial app, before a call is bridged.
Many thanks to sobomax for submitting this patch.
Quoting from bug 11582:
"So the goal of the patch was to use the user configured feature code during the
call setup phase. The original ast_feature_interpret() function is not well suited
for this purpose as it uses much call bridge specific data and doesn't separate a
detection of feature from a feature handler call. So a new function ast_feature_detect()
has been extracted off the ast_feature_interpret() function but keeping the original
logic intact except some insignificant changes to locking.
"Having created the ast_feature_detect() function the possibility to use feature detection
in almost any place of the asterisk code. So a call to this function has been added to
wait_for_answer() function of app_dial.so module. This code doesn't call the feature handler
however and uses old call leg disconnect logic to make the changes as small and simple as
possible to prevent unexpected problems. A disconnect feature currently is the only one
supported during call setup as other features as call parking and call transfer don't make much
sense during call setup. However if need in some of the features would arise it is much easier to
implement as the infrastructure changes are already in place with this patch."
I have cleaned up the patch somewhat, and verified that the existing functionality is not
harmed, and that the new functionality works. Terry has committed his stuff, and there were
no conflicts (see 14274).
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
patch-include__asterisk__features.h uploaded by sobomax (license 359)
patch-res__res_features.c uploaded by sobomax (license 359)
enable-features-during-call-setup.diff uploaded by sobomax (license 359)
11583.newdiff uploaded by murf (license 17)
enable-features-during-call-setup-1.diff uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
Tested by: sobomax, murf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172030 | murf | 2009-01-28 11:51:16 -0700 (Wed, 28 Jan 2009) | 46 lines
This patch fixes h-exten running misbehavior in manager-redirected
situations.
What it does:
1. A new Flag value is defined in include/asterisk/channel.h,
AST_FLAG_BRIDGE_HANGUP_DONT, which used as a messenge to the
bridge hangup exten code not to run the h-exten there (nor
publish the bridge cdr there). It will done at the pbx-loop
level instead.
2. In the manager Redirect code, I set this flag on the channel
if the channel has a non-null pbx pointer. I did the same for the
second (chan2) channel, which gets run if name2 is set...
and the first succeeds.
3. I restored the ending of the cdr for the pbx loop h-exten
running code. Don't know why it was removed in the first place.
4. The first attempt at the fix for this bug was to place code
directly in the async_goto routine, which was called from a
large number of places, and could affect a large number of
cases, so I tested that fix against a fair number of transfer
scenarios, both with and without the patch. In the process,
I saw that putting the fix in async_goto seemed not to affect
any of the blind or attended scenarios, but still, I was
was highly concerned that some other scenarios I had not tested
might be negatively impacted, so I refined the patch to
its current scope, and jmls tested both. In the process, tho,
I saw that blind xfers in one situation, when the one-touch
blind-xfer feature is used by the peer, we got strange
h-exten behavior. So, I inserted code to swap CDRs and
to set the HANGUP_DONT field, to get uniform behavior.
5. I added code to the bridge to obey the HANGUP_DONT flag,
skipping both publishing the bridge CDR, and running
the h-exten; they will be done at the pbx-loop (higher)
level instead.
6. I removed all the debug logs from the patch before committing.
7. I moved the AUTOLOOP set/reset in the h-exten code in res_features
so it's only done if the h-exten is going to be run. A very
minor performance improvement, but technically correct.
(closes issue #14241)
Reported by: jmls
Patches:
14241_redirect_no_bridgeCDR_or_h_exten_via_transfer uploaded by murf (license 17)
Tested by: murf, jmls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is an ugly hack from 1.4 that allows the timeout callback from a parked
call to use the right channel name for the callback when the park is done with
a builtin attended transfer (that isn't completed early). This hasn't ever
worked in trunk and no one has complained yet, so eh.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r169485 | twilson | 2009-01-20 12:40:56 -0600 (Tue, 20 Jan 2009) | 6 lines
Don't play audio to the channel if we've masqueraded
(closes issue #14066)
Reported by: bluefox
Tested by: otherwiseguy, bluefox
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168716 | twilson | 2009-01-15 12:22:49 -0600 (Thu, 15 Jan 2009) | 12 lines
Convert call to park_call_full to masq_park_call_announce
Since we removed the AST_PBX_KEEPALIVE return value, we need to use masqueraded
parking, otherwise we will try to call ast_hangup() in __pbx_run() and in
do_parking_thread() and then promptly crash.
(closes issue #14215)
Reported by: waverly360
Tested by: otherwiseguy
(closes issue #14228)
Reported by: kobaz
Tested by: otherwiseguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
........
r166093 | murf | 2008-12-19 15:30:32 -0700 (Fri, 19 Dec 2008) | 131 lines
This merges the masqpark branch into 1.4
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164201 | russell | 2008-12-15 08:31:37 -0600 (Mon, 15 Dec 2008) | 31 lines
Handle a case where a call can be bridged to a channel that is still ringing.
The issue that was reported was about a case where a RINGING channel got
redirected to an extension to pick up a call from parking. Once the parked
call got taken out of parking, it heard silence until the other side answered.
Ideally, the caller that was parked would get a ringing indication. This patch
fixes this case so that the caller receives ringback once it comes out of
parking until the other side answers.
The fixes are:
- Make sure we remember that a channel was an outgoing channel when doing
a masquerade. This prevents an erroneous ast_answer() call on the channel,
which causes a bogus 200 OK to be sent in the case of SIP.
- Add some additional comments to explain related parts of code.
- Update the handling of the ast_channel visible_indication field. Storing
values that are not stateful is pointless. Control frames that are events
or commands should be ignored.
- When a bridge first starts, check to see if the peer channel needs to be
given ringing indication because the calling side is still ringing.
- Rework ast_indicate_data() a bit for the sake of readability.
(closes issue #13747)
Reported by: davidw
Tested by: russell
Review: http://reviewboard.digium.com/r/90/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163092 | russell | 2008-12-11 10:54:51 -0600 (Thu, 11 Dec 2008) | 11 lines
Fix an issue that made it so you could only have a single caller executing
a custom feature at a time. This was especially problematic when custom
features ran for any appreciable amount of time.
The fix turned out to be quite simple. The dynamic features are now stored
in a read/write list instead of a list using a mutex.
(closes issue #13478)
Reported by: neutrino88
Fix suggested by file
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13990)
Reported by: eliel
Patches:
array_len.diff uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
prevents a crash when executing Park from the dialplan with no arguments.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158603 | murf | 2008-11-21 16:14:50 -0700 (Fri, 21 Nov 2008) | 11 lines
In reference to the fix made for 13871, I was
merging the fix into 1.6.0 and realized I missed
the code in the h-exten block, and didn't catch it
because my test case had the h-exten commented out.
So, this corrects the code I missed, as a
preventative against another crash report.
Tested with the h-exten defined, all is well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158483 | murf | 2008-11-21 14:19:47 -0700 (Fri, 21 Nov 2008) | 11 lines
(closes issue #13871)
Reported by: mdu113
This one is totally my fault. The code doesn't even
create a bridge CDR if the channel CDR has POST_DISABLED.
I didn't check for that at the end of the bridge.
Fixed with a few small insertions. Tested. Looks
good. No cdr generated, no crash, no unnecc. data
objects created either.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157305 | mmichelson | 2008-11-18 12:25:55 -0600 (Tue, 18 Nov 2008) | 12 lines
Fix a crash in the end_bridge_callback of app_dial and
app_followme which would occur at the end of an attended
transfer. The error occurred because we initially stored
a pointer to an ast_channel which then was hung up due
to a masquerade.
This commit adds a "fixup" callback to the bridge_config
structure to allow for end_bridge_callback_data to be
changed in the case that a new channel pointer is needed
for the end_bridge_callback.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the comparison is case insensitive.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157041 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
introduced
ast_channel_search_locked need to be made. Specifically, the caller needs to be able to
pass arbitrary data which in turn is passed to the callback. This patch addresses all
of the nested functions currently in asterisk trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r155553 | seanbright | 2008-11-08 20:08:07 -0500 (Sat, 08 Nov 2008) | 6 lines
Use static functions here instead of nested ones. This requires a small
change to the ast_bridge_config struct as well. To understand the reason
for this change, see the following post:
http://gcc.gnu.org/ml/gcc-help/2008-11/msg00049.html
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and config_text_file_save to have an ast_ prefix
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
variables that were set after ast_bridge_call was called would not show up in the 'h' exten. Added a callback function to handle setting variables, etc. from w/in the bridging code. Calls back into a nested function within the function calling ast_bridge_call
(closes issue #13793)
Reported by: greenfieldtech
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146026 | murf | 2008-10-03 12:12:54 -0500 (Fri, 03 Oct 2008) | 18 lines
(closes issue #13579)
Reported by: dwagner
(closes issue #13584)
Reported by: dwagner
Tested by: murf, putnopvut
The thought occurred to me that the res= from the extension spawn
was ending up being returned from the bridge.
"Thou shalt not poison the return value". Made the change
and it appears to allow blind xfers to work as normal.
If I'm wrong, reopen the bugs. But it looks good to me!
Many thanks to putnopvut for helping me reproduce this!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reported by: krisk84
Tested by: krisk84
This change prevents a call that is placed in the parkinglot to be picked up before the PBX is finished. If another extension dials the parking extension before the PBX thread has completed at minimum warnings will occur about the PBX not properly being terminated. At worst, a crash could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
they would be NULL otherwise. Since they will be set automatically, removing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
from AGI.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
originally used. (One of the commits was only one line.)
1) r143204:
The main change here was to masquerade the channel if the channel that was to be parked was running a PBX on it. The PBX thread can then maintain full control of the channel (the zombie) as it expects to while allowing the parking thread full control of the real (parked) channel.
2) r143270:
Changed park_call_full to hold the parkinglot lock a little longer, which protects the parkeduser struct from being freed out from underneath. Made sure that the parking extension is added to the parking context while holding the lock thereby ensuring that there are no spurious warnings from removal attempts when a hangup occurs while the parking lot is being announced.
3) r143475: (the one liner)
compare peer and chan instead of looking at the parked user (pu), which could have possibly already have been freed by the parking thread
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
being passed in, there
is no garbage attempted to be used. Also, do not set args to unknown value again if there are
no options passed in.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146875 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ao2_interator_next increments the ref count automatically
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to fix blind transfers with my last commit here, I also
caused an unwanted side-effect. That is, only the first
priority of the 'h' extension would be executed when
a blind transfer occurred instead of all priorities.
Essentially, my last commit corrected the return value
of ast_bridge_call. However, the implementation still
was not 100% correct. Now it is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
if (x).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
within ast_bridge_call was reversed.
This problem was observed when a blind transfer placed from
the callee channel of a test call failed.
While the problem I am solving here is exactly the same
as what was reported in issue #13584, the difference is
that this fix I am applying is trunk-only. Issue #13584
was reported against the 1.4 branch, and my tests
of 1.4's blind transfers appear to work fine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144066 | murf | 2008-09-23 10:41:49 -0600 (Tue, 23 Sep 2008) | 29 lines
(closes issue #13489)
Reported by: DougUDI
Tested by: murf
(closes issue #13490)
Reported by: seanbright
Tested by: murf
(closes issue #13467)
Reported by: edantie
Tested by: murf, edantie, DougUDI
This crash happens because we are unsafely handling old pointers.
The channel whose cdr is being handled, has been hung up and
destroyed already. I reorganized the code a bit, and tried not
to lose the fork-cdr-chain concepts of the previous code.
I now verify that the 'previous' channel (the channel we
had when the bridge was started), still exists, by looking it up
by name in the channel list. I also do not try to reset the
CDR's of channels involved in bridges.
Testing shows it solves the crash problem, and should not
negatively impact previous fixes involving CDR's generated
during/after blind transfers. (The reason we need to reset
the CDR's on the "beginning" channels in the first place).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142474 | murf | 2008-09-10 15:58:17 -0600 (Wed, 10 Sep 2008) | 30 lines
(closes issue #12318)
Reported by: krtorio
I made a small change to the code that handles local channel situations.
In that code, I copy the answer time from the peer cdr, to the bridge_cdr,
but I wasn't also copying the disposition from the peer cdr.
So, Now I copy the disposition, and I've tested against
these cases:
1. phone 1 never answers the phone; no cdr is generated at all.
this should show up as a manager command failure or something.
2. phone 2 never answers. CDR is generated, says NO ANSWER
3. phone 2 is busy. CDR is generated, says BUSY
4. phone 2 answers: CDR is generated, times are correct; disposition
is ANSWERED, which is correct. The start time is the time that
the manager dialed the first phone. The answer time is the time
the second phone picks up.
I purposely left the cid and src fields blank; since this call really
originates from the manager, there is no 'easy' data to put in these
fields. If you feel strongly that these fields should be filled in,
re-open this bug and I'll dig further.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142063 | russell | 2008-09-09 10:40:24 -0500 (Tue, 09 Sep 2008) | 5 lines
Ensure that the stored CDR reference is still valid after the bridge before
poking at it. Also, keep the channel locked while messing with this CDR.
(fixes crashes reported in issue #13409)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
