Age | Commit message (Collapse) | Author |
|
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 405281 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405282 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If one specified a verbose level within a logging facility in
logger.conf then any component after it was ignored. Fixed so
all values are correctly read.
(closes issue ASTERISK-22456)
Reported by: Kevin Harwell
........
Merged revisions 401833 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401835 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Fixed a memory leak discovered in the logger where a temporary string buffer
was not being freed.
(closes issue ASTERISK-22540)
Reported by: John Hardin
........
Merged revisions 399513 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399514 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399515 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The remote console continued to have issues with its output. In this case CLI
command output would either not show up (if verbose level = 0) or would contain
verbose prefixes (if verbose level > 0) once log messages were sent to the
remote console. The fix now now adds verbose prefix data to all new lines
contained in a verbose log string.
(closes issue ASTERISK-22450)
Reported by: David Brillert
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2825/
........
Merged revisions 399267 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399268 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2798/
........
Merged revisions 397948 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows astmm to access the backtrace generation code in Asterisk.
When memory is allocated, a backtrace is created and stored with the memory
region that tracks the allocation. If a memory corruption is detected, the
backtrace is printed to the astmm log. The backtrace will make use of the
BETTER_BACKTRACES build option if available.
As a result, this patch moves the backtrace generation code into its own file
and uses the non-wrapped versions of the C library memory allocation routines.
This allows the memory allocation code to safely use the backtrace generation
routines without infinitely recursing.
Review: https://reviewboard.asterisk.org/r/2567
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
(closes issue ASTERISK-21716)
Reported by: Corey Farrell
patches:
logger-process-all-messages.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 389676 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 389677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The CALL-ID (ie [C-00000074]) is missing when logging to syslog. This was just
an oversight when this feature was added.
* Add CALL-IDs when using syslog
(closes issue ASTERISK-21430)
Reported by: Nikola Ciprich
Tested by: Nikola Ciprich, Michael L. Young
Patches:
asterisk-21430-syslog-callid_trunk.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2526/
........
Merged revisions 388605 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Messages sent while the logger thread is shutting down will now have
their associated callid freed properly.
........
Merged revisions 382574 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
While autoservice is running and servicing a channel the callid is being stored
and removed in the thread's local storage for each iteration of the thread loop.
If debug was set to a sufficient level the log file would be spammed with callid
thread local storage debug messages.
Added a new function that checks to see if the callid to be stored is different
than what is already contained (if anything). If it is different then
store/replace and log, otherwise just leave as is. Also made it so all logging
of debug messages pertaining to the callid thread storage outputs only when
TEST_FRAMEWORK is defined.
(issue ASTERISK-21014)
(closes issue ASTERISK-21014)
Report by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2324/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The core module related to coloring terminal output was old and needed
some love. The main thing here was an attempt to get rid of the
obscene number of stack-local buffers that were allocated for no other
reason than to colorize some output. Instead, this uses a simple trick
to allocate several buffers within threadlocal storage, then
automatically rotates between them, so that you can make multiple calls
to the colorization routine within one function and not need to
allocate multiple buffers.
Review: https://reviewboard.asterisk.org/r/2241/
Patches:
bug.patch uploaded by Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add an option that lets you specify that the timestamps going into the realtime
queue log should be in GMT instead of local time.
Review: https://reviewboard.asterisk.org/r/2287/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380209 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Since there is no need for the call-id logging ao2 object to have a lock,
don't create it with one.
........
Merged revisions 379232 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378854 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Cleanup CLI commands, destroy verbosers and logchannels lists on exit.
(issue ASTERISK-20649)
Reported by: Corey Farrell
Patches:
logger-cleanup-all.patch (license #5909) patch uploaded by Corey Farrell
Modified
........
Merged revisions 377771 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377772 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377773 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Similar to the patch that moved the fork earlier in the startup sequence to
prevent mutex errors in the recursive mutex surrounding the read/write thread
registration lock, this patch re-initializes the logmsgs mutex. Part of the
start up sequence before forking the process into the background includes
reading asterisk.conf; this has to occur prior to the call to daemon in order
to read startup parameters. When reading in a conf file, log statements can
be generated. Since this can't be avoided, the mutex instead is
re-initialized to ensure a reset of any thread tracking information.
This patch also includes some additional debugging to catch errors when
locking or unlocking the recursive mutex that surrounds locks when the
DEBUG_THREADS build option is enabled. DO_CRASH or THREAD_CRASH will
cause an abort() if a mutex error is detected.
(issue ASTERISK-19463)
Reported by: mjordan
Tesetd by: mjordan
........
Merged revisions 376586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376587 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376588 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
With this option in use, it may be necessary to regulate your log files
externally.
(closes issue ASTERISK-20189)
Reported by: Jaco Kroon
Patches:
asterisk-logger-norotate-trunk.patch uploaded by Jaco Kroon (license 5671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This replaces all calls to alloca() with ast_alloca() which calls gcc's
__builtin_alloca() to avoid BSD semantics and removes all NULL checks
on memory allocated via ast_alloca() and ast_strdupa().
(closes issue ASTERISK-20125)
Review: https://reviewboard.asterisk.org/r/2032/
Patch-by: Walter Doekes (wdoekes)
........
Merged revisions 370642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370643 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The awk script parses out the first instance of the DOCUMENTATION tag that it
finds within a file. If a file did not previously have a DOCUMENTATION tag
but received one due to it having an AMI event, then the XML fragment
associated with the AMI event was erroneously placed in the resulting XML
file. Without the python scripts, these XML fragments will not validate.
This patch adds DOCUMENTATION tags at the top of those files that did
not previously have them to prevent the awk script from pulling AMI event
documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds some basic documentation for a number of modules. This
includes core source files in Asterisk (those in main), as well as
chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD
has also been updated to allow referencing of AMI commands.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adds call ID logging changes to specific channel drivers that weren't handled
handled in phase II of Call ID Logging. Also covers logging for threads for
threads created by systems that may be involved with many different calls.
Extra special thanks to Richard for rigorous review of chan_dahdi and its
various signalling modules.
review: https://reviewboard.asterisk.org/r/1927/
review: https://reviewboard.asterisk.org/r/1950/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The array is either setup with a callid string or only the first element
needs to be initialized.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r364635 | markm | 2012-04-30 11:51:12 -0400 (Mon, 30 Apr 2012) | 10 lines
Sanatize result from bfd_find_nearest_line (BETTER_BACKTRACES)
bfd_find_nearest_line can possibly set file to null resulting in a crash when strrchr(file) runs
(closes issue ASTERISK-19815)
Reported by Mark Murawski
Tested by Mark Murawski
........
........
Merged revisions 364650 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364654 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The logger_thread() had an exit path that failed to release the logmsgs
list lock.
* Make logger_thread() exit path unlock the logmsgs list lock.
* Made ast_log() not queue any messages to the logmsgs list if the
close_logger_thread flag is set.
(issue ASTERISK-19463)
Reported by: Matt Jordan
........
Merged revisions 360933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360934 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Log messages will now display a call number that they are tied to (ordered for calls
based on when they started). This feature is made to be minimally invasive without
requiring changes to many of the existing log messages. These IDs won't show up for
verbose messages on CLI (but they will in log files) This is currently in phase II
of production, see more about this feature on the wiki --
https://wiki.asterisk.org/wiki/display/AST/Unique+Call-ID+Logging
Review: https://reviewboard.asterisk.org/r/1823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360786 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Log messages will now display a call number that they are tied to (ordered for calls
based on when they started). This feature is made to be minimally invasive without
requiring changes to many of the existing log messages. These IDs won't show up for
verbose messages on CLI (but they will in log files) This is currently in phase II
of production, see more about this feature on the wiki --
https://wiki.asterisk.org/wiki/display/AST/Unique+Call-ID+Logging
Review: https://reviewboard.asterisk.org/r/1823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch updates the NUMLOGLEVELS define in logger.h to 32, to match the fact
that logger.c implements 32 log levels (because of the custom log level stuff).
asterisk.c uses this define to size an array of levels per remote console.
This array is modified in ast_console_toggle_loglevel(), which is called by the
"logger set level" CLI command. While the documentation for the CLI command
doesn't make it terribly obvious, you can use this CLI command to toggle a
custom log level on a remote console, as well. However, doing so led to an
invalid array index in asterisk.c.
This array is read from any time a log message is written to a console. So,
all custom log level messages resulted in a bogus read if a remote console
was connected.
........
Merged revisions 359259 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359260 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
verbosity level.
Review: https://reviewboard.asterisk.org/r/1599
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334954 | rmudgett | 2011-09-08 17:28:56 -0500 (Thu, 08 Sep 2011) | 17 lines
Merged revisions 334953 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334953 | rmudgett | 2011-09-08 17:27:40 -0500 (Thu, 08 Sep 2011) | 10 lines
Fix crash with res_fax when MALLOC_DEBUG and "core stop gracefully" are used.
Asterisk crashes if MALLOC_DEBUG is enabled when res_fax tries to
unregister its logger level.
* Make ast_logger_unregister_level() use ast_free() instead of free().
When MALLOC_DEBUG is enabled, ast_free() does not degenerate into a call
to free(). Therefore, if you allocated memory with a form of ast_malloc
you must free it with ast_free.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Allow tracking of previous versions through log file records to be tracked.
Each time log file is created or opened, log Asterisk Version, Buildinfo. etc.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1409/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331654 | kmoore | 2011-08-12 11:21:37 -0500 (Fri, 12 Aug 2011) | 19 lines
Merged revisions 331649 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331649 | kmoore | 2011-08-12 11:20:25 -0500 (Fri, 12 Aug 2011) | 12 lines
Logger does not warn of failure to open logging channels
Currently, logger only prints an error message to stderr when it fails to open
a logger channel where many users will not see it because the logger lock is
held. The alternative provided by this patch is to log the error to all
attached consoles in the hopes that it will be easier to see. Additionally,
this patch prevents the failed logger channel from being added to the list
where it would silently fail on each call to the Asterisk logger.
(closes issue ASTERISK-16231)
Review: https://reviewboard.asterisk.org/r/1338
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331462 | rmudgett | 2011-08-10 15:41:35 -0500 (Wed, 10 Aug 2011) | 37 lines
Merged revisions 331461 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331461 | rmudgett | 2011-08-10 15:29:59 -0500 (Wed, 10 Aug 2011) | 30 lines
Output of queue log not started until logger reloaded.
ASTERISK-15863 caused a regression with queue logging. The output of the
queue log is not started until the logger configuration is reloaded.
* Queue log initialization is completely delayed until the first message
is posted to the queue log system. Including the initial opening of the
queue log file.
* Fixed rotate_file() ROTATE strategy to give the file just rotated out to
the configured exec function after rotate. Just like the other strategies.
* Fixed logger reload to always post the queue reload entry instead of
just if there is a queue log file.
* Refactored some code to eliminate some redundancy and to reduce stack
utilization.
(closes issue ASTERISK-17036)
JIRA SWP-2952
Reported by: Juan Carlos Valero
Patches:
jira_asterisk_17036_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
(closes issue ASTERISK-18208)
Reported by: Christian Pinedo
Review: https://reviewboard.asterisk.org/r/1333/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307092 | qwell | 2011-02-08 15:24:01 -0600 (Tue, 08 Feb 2011) | 9 lines
Fix issue with verbose messages not showing on remote console.
This code was reworked recently, and since the logchannel list hadn't been
created yet at this point, and it was a verbose message, it was being dropped
on the floor. Now it'll continue on to where it should be handled.
(closes issue #18580)
Reported by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #18556)
Reported by: kkm
Review: https://reviewboard.asterisk.org/r/1071/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17668)
Reported by: tilghman
Patches:
20100718__logger_reload_altconf__2.diff.txt uploaded by tilghman (license 14)
Review: (by lmadsen, russell within comments on issue tracker)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287863 | russell | 2010-09-21 08:41:41 -0500 (Tue, 21 Sep 2010) | 2 lines
Fix a regression in verbose logger processing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287639 | bbryant | 2010-09-20 17:19:12 -0400 (Mon, 20 Sep 2010) | 8 lines
Fixes an error with the logger that caused verbose messages to be spammed to the
screen if syslog was configured in logger.conf
(closes issue #17974)
Reported by: lmadsen
Review: https://reviewboard.asterisk.org/r/915/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|