Age | Commit message (Collapse) | Author |
|
Log messages will now display a call number that they are tied to (ordered for calls
based on when they started). This feature is made to be minimally invasive without
requiring changes to many of the existing log messages. These IDs won't show up for
verbose messages on CLI (but they will in log files) This is currently in phase II
of production, see more about this feature on the wiki --
https://wiki.asterisk.org/wiki/display/AST/Unique+Call-ID+Logging
Review: https://reviewboard.asterisk.org/r/1823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch updates the NUMLOGLEVELS define in logger.h to 32, to match the fact
that logger.c implements 32 log levels (because of the custom log level stuff).
asterisk.c uses this define to size an array of levels per remote console.
This array is modified in ast_console_toggle_loglevel(), which is called by the
"logger set level" CLI command. While the documentation for the CLI command
doesn't make it terribly obvious, you can use this CLI command to toggle a
custom log level on a remote console, as well. However, doing so led to an
invalid array index in asterisk.c.
This array is read from any time a log message is written to a console. So,
all custom log level messages resulted in a bogus read if a remote console
was connected.
........
Merged revisions 359259 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359260 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
verbosity level.
Review: https://reviewboard.asterisk.org/r/1599
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334954 | rmudgett | 2011-09-08 17:28:56 -0500 (Thu, 08 Sep 2011) | 17 lines
Merged revisions 334953 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334953 | rmudgett | 2011-09-08 17:27:40 -0500 (Thu, 08 Sep 2011) | 10 lines
Fix crash with res_fax when MALLOC_DEBUG and "core stop gracefully" are used.
Asterisk crashes if MALLOC_DEBUG is enabled when res_fax tries to
unregister its logger level.
* Make ast_logger_unregister_level() use ast_free() instead of free().
When MALLOC_DEBUG is enabled, ast_free() does not degenerate into a call
to free(). Therefore, if you allocated memory with a form of ast_malloc
you must free it with ast_free.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Allow tracking of previous versions through log file records to be tracked.
Each time log file is created or opened, log Asterisk Version, Buildinfo. etc.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1409/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331654 | kmoore | 2011-08-12 11:21:37 -0500 (Fri, 12 Aug 2011) | 19 lines
Merged revisions 331649 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331649 | kmoore | 2011-08-12 11:20:25 -0500 (Fri, 12 Aug 2011) | 12 lines
Logger does not warn of failure to open logging channels
Currently, logger only prints an error message to stderr when it fails to open
a logger channel where many users will not see it because the logger lock is
held. The alternative provided by this patch is to log the error to all
attached consoles in the hopes that it will be easier to see. Additionally,
this patch prevents the failed logger channel from being added to the list
where it would silently fail on each call to the Asterisk logger.
(closes issue ASTERISK-16231)
Review: https://reviewboard.asterisk.org/r/1338
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331462 | rmudgett | 2011-08-10 15:41:35 -0500 (Wed, 10 Aug 2011) | 37 lines
Merged revisions 331461 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331461 | rmudgett | 2011-08-10 15:29:59 -0500 (Wed, 10 Aug 2011) | 30 lines
Output of queue log not started until logger reloaded.
ASTERISK-15863 caused a regression with queue logging. The output of the
queue log is not started until the logger configuration is reloaded.
* Queue log initialization is completely delayed until the first message
is posted to the queue log system. Including the initial opening of the
queue log file.
* Fixed rotate_file() ROTATE strategy to give the file just rotated out to
the configured exec function after rotate. Just like the other strategies.
* Fixed logger reload to always post the queue reload entry instead of
just if there is a queue log file.
* Refactored some code to eliminate some redundancy and to reduce stack
utilization.
(closes issue ASTERISK-17036)
JIRA SWP-2952
Reported by: Juan Carlos Valero
Patches:
jira_asterisk_17036_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
(closes issue ASTERISK-18208)
Reported by: Christian Pinedo
Review: https://reviewboard.asterisk.org/r/1333/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307092 | qwell | 2011-02-08 15:24:01 -0600 (Tue, 08 Feb 2011) | 9 lines
Fix issue with verbose messages not showing on remote console.
This code was reworked recently, and since the logchannel list hadn't been
created yet at this point, and it was a verbose message, it was being dropped
on the floor. Now it'll continue on to where it should be handled.
(closes issue #18580)
Reported by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #18556)
Reported by: kkm
Review: https://reviewboard.asterisk.org/r/1071/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17668)
Reported by: tilghman
Patches:
20100718__logger_reload_altconf__2.diff.txt uploaded by tilghman (license 14)
Review: (by lmadsen, russell within comments on issue tracker)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287863 | russell | 2010-09-21 08:41:41 -0500 (Tue, 21 Sep 2010) | 2 lines
Fix a regression in verbose logger processing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287639 | bbryant | 2010-09-20 17:19:12 -0400 (Mon, 20 Sep 2010) | 8 lines
Fixes an error with the logger that caused verbose messages to be spammed to the
screen if syslog was configured in logger.conf
(closes issue #17974)
Reported by: lmadsen
Review: https://reviewboard.asterisk.org/r/915/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279390 | tilghman | 2010-07-25 12:32:21 -0500 (Sun, 25 Jul 2010) | 8 lines
Don't assume qlog is open.
(closes issue #17704)
Reported by: vrban
Patches:
issue17704.patch uploaded by pabelanger (license 224)
Tested by: vrban
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to be used, even when realtime is used.
(closes issue #17082)
Reported by: coolmig
Patches:
20100720__issue17082.diff.txt uploaded by tilghman (license 14)
Tested by: coolmig
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
logger.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269635 | tilghman | 2010-06-10 02:52:34 -0500 (Thu, 10 Jun 2010) | 9 lines
Ensure restartable system calls can restart (BSD signal semantics).
This eliminates the annoying <beep> on the console.
(closes issue #17477)
Reported by: jvandal
Patches:
20100610__issue17477.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266142 | tilghman | 2010-05-26 16:11:44 -0500 (Wed, 26 May 2010) | 14 lines
Use sigaction for signals which should persist past the initial trigger, not signal.
If you call signal() in a Solaris signal handler, instead of just resetting
the signal handler, it causes the signal to refire, because the signal is not
marked as handled prior to the signal handler being called. This effectively
causes Solaris to immediately exceed the threadstack in recursive signal
handlers and crash.
(closes issue #17000)
Reported by: rmcgilvr
Patches:
20100526__issue17000.diff.txt uploaded by tilghman (license 14)
Tested by: rmcgilvr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Nick Lewis pointed out that the patch as committed wouldn't actually include
dynamic logger levels, which was missed by the other reviewers. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Now that Asterisk modules can dynamically create and destroy logger levels
on demand, it's useful to be able to configure a logger channel (console,
file, whatever) to be able to accept log messages from *all* levels, even
levels created dynamically. This patch adds support for this, by allowing
the '*' level name to be used in logger.conf.
Review: https://reviewboard.asterisk.org/r/663/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A simple patch to enable auto tab complete.
(closes issue #17152)
Reported by: pabelanger
Patches:
0017152.patch uploaded by pabelanger (license 224)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248582 | tilghman | 2010-02-24 15:02:18 -0600 (Wed, 24 Feb 2010) | 7 lines
Remove color code sequences from verbose messages that go to logfiles.
(closes issue #16786)
Reported by: dodo
Patches:
logger2.patch uploaded by dodo (license 989)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #15973)
Reported by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The logic here was reversed as ast_safe_system returns -1 on error and not on
success. Fix suggested by reporter.
(closes issue #15667)
Reported by: loic
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This has the pleasant side effect of cleaning up the header inclusion process
in logger.c.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The 'pglobal' tool is quite handy indeed :-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
in the logger.
Since the message structure is allocated using ast_calloc_with_stringfields we do not need to
free the memory used for the stringfields as it will get freed when the message structure is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds the ability for modules to dynamically create logger levels for their own use; these are named levels just like the built-in levels, and can be directed to any destination that the logger can send any level to, by including their names in logger.conf.
Review: https://reviewboard.asterisk.org/r/244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194610 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1) If MALLOC_DEBUG is used when concurrently using ast_backtrace, the free()
used in that routine will trigger an error, because the memory was allocated
internally to libc, where we could not intercept that call to wrap it.
Therefore, it's not memory we knew about, and the free is reported as an
error.
2) Now that channels are objects, the old hack of initializing a channel
to all zeroes no longer works, since we may try to call something like
ast_channel_lock() within a function on that reference. In that case, it's
reported as an error, because the pointer isn't an object reference.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193193 | kpfleming | 2009-05-08 09:03:28 -0500 (Fri, 08 May 2009) | 7 lines
Make absolute paths for logger channels work properly
(Note: This is not a new feature, it was previously undocumented and broken.)
The Asterisk logger has a feature to support absolute pathnames for logger channels, but the code implementing the feature was broken. This has been fixed, and the absolute path feature is now documented in the sample logger.conf.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193194 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In discussions today at the Europe Asterisk Developer Meet-Up, we determined that
the event_log was used in only 9 places in the entire tree, and really was not needed
at all. The users have been converted to use LOG_NOTICE, or the messages have been
removed since other messages were already in place that provided the same information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This code was copy-and-pasted without properly changing references to event_rotate into queue_rotate, so under some conditions the log rotation would rotate queue_log even though it was not necessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
much better solution will be used
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
events, so that they can be fed into external processes for analysis and possible mitigation efforts
(inspired by this evening's Toronto Asterisk Users Group meeting and previous dicussions amongst various community members)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
I was finding that on my dev box, occasionally attempting to "stop now" in
trunk would cause Asterisk to hang. I traced this to the fact that the logger
thread was waiting on a condition which had already been signalled. The logger
thread also need to be sure to check the value of the close_logger_thread variable.
The close_logger_thread variable is only checked when the list of logmessages is empty.
This allows for the logger thread to print and free any pending messages before exiting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14194)
Reported by: pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13990)
Reported by: eliel
Patches:
array_len.diff uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
trying to parse an invalid config
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|