Age | Commit message (Collapse) | Author |
|
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When using FEC, with span=3 and entries=4 Asterisk will attempt to repair
the packet with sequence number 5, as it will see that packet -4 is
missing. The result is Asterisk sending garbage packets that can kill a
fax.
This patch adds a check to see if the sequence number is valid before
checking if the packet is missing.
Review: https://reviewboard.asterisk.org/r/3657/
#ASTERISK-23908 #close
Reported by: Torrey Searle
patches:
udptl_fec.patch uploaded by Torrey Searle (License 5334)
........
Merged revisions 417318 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417320 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
........
Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_bind to a port reserved for another program by SELinux causes
errno == EACCES. This caused random failures when binding rtp or
udptl sockets. Treat EACCES as a non-fatal error, try next port.
(closes issue ASTERISK-23134)
Reported by: Corey Farrell
........
Merged revisions 406933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 406934 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 406935 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Removing dead code starting with ast_udptl_bridge() eliminated the code in
this change.
Note: This code has actually been dead since Asterisk v1.4 when it was
first put in.
Review: https://reviewboard.asterisk.org/r/3079/
........
Merged revisions 404354 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fixed resulting warnings with improper use of ao2_global_obj_replace().
* Made a couple uses of ao2_global_obj_replace_unref(x, NULL) into the
equivalent and more appropriate ao2_global_obj_release() call.
........
Merged revisions 398533 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-22426)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2806/
........
Merged revisions 398020 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If the file udptl.conf is unavailable at startup, UDPTL will fail to
initialize and while it makes some noise, it isn't immediately
obvious why consumers start to fail when using it. This patch makes
UDPTL load as though an empty config was provided when udptl is
unavailable at startup.
(closes issue ASTERISK-22349)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2773/
........
Merged revisions 397365 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows a module to define its configuration in XML in source, such
that it can be parsed by the XML documentation engine. Documentation is
generated in a two-pass approach:
1. The documentation is first generated from the XML pulled from the source
2. The documentation is then enhanced by the registration of configuration
options that use the configuration framework
This patch include configuration documentation for the following modules:
* chan_motif
* res_xmpp
* app_confbridge
* app_skel
* udptl
Two new CLI commands have been added:
* config show help - show configuration help by module, category, and item
* xmldoc dump - dump the in-memory representation of the XML documentation to
a new XML file.
Review: https://reviewboard.asterisk.org/r/2278
Review: https://reviewboard.asterisk.org/r/2058
patches:
on review 2058 uploaded by twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Minor optimization in ast_rtp_instance_early_bridge().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Cleanup CLI commands on exit.
(issue ASTERISK-20649)
Reported by: Corey Farrell
Patches:
udptl-shutdown-1_8-10.patch (license #5909) patch uploaded by Corey Farrell
udptl-shutdown-11-trunk.patch (license #5909) patch uploaded by Corey Farrell
Modified
........
Merged revisions 377847 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377848 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377849 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch resolves a number of ref leaks that occur primarily on Asterisk
shutdown. It adds a variety of shutdown routines to core portions of
Asterisk such that they can reclaim resources allocate duringd initialization.
Review: https://reviewboard.asterisk.org/r/2137
........
Merged revisions 374177 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374178 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374196 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In some cases, recovering lost packets using the secondary packet
recovery mechanism with UDPTL/T.38 can result in the recovery of
zero-length packets. These must be ignored or the frame generated from
them can cause segfaults and allocation failures.
(closes issue ASTERISK-19762)
(closes issue ASTERISK-19373)
Reported-by: Benjamin (bulkorok)
Reported-by: Rob Gagnon (rgagnon)
........
Merged revisions 371544 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 371545 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 371546 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adding multiple file support broke reloading an unchanged file. This
adds an enum for return values for the aco_process_* functions and
ensures that the config is not applied if res is not ACO_PROCESS_OK.
Review: https://reviewboard.asterisk.org/r/1979/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This framework adds a way to register the various options in a config
file with Asterisk and to handle loading and reloading of that config
in a consistent and atomic manner.
Review: https://reviewboard.asterisk.org/r/1873/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Scan results indicated that this array could be used uninitialized. At a quick
look, it looks correct. In any case, initializing it is a Good Thing (tm).
........
Merged revisions 359457 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359458 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1753/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Patch by: Clod Patry
Review: https://reviewboard.asterisk.org/r/1651
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354429 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The udptl port range was defined as 4000-4999 in the udptl.conf.sample,
as 4500-4599 if you didn't have a config and 4500-4999 if your config
was broken. Default is now 4000-4999.
(closes issue ASTERISK-16250)
Reviewed by: Tilghman Lesher
Review: https://reviewboard.asterisk.org/r/1565
........
Merged revisions 343580 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343581 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339626 | rmudgett | 2011-10-06 12:53:00 -0500 (Thu, 06 Oct 2011) | 25 lines
Merged revisions 339625 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339625 | rmudgett | 2011-10-06 12:49:38 -0500 (Thu, 06 Oct 2011) | 18 lines
Fix debugging messages generated by 'udptl debug'.
* Makes chan_sip set the tag to the channel name.
* Fixes received debug message sequence number.
* Removed tx/rx debug message type since it was hard coded to 0.
* Made udptl.c logged message header consistent if possible: "UDPTL (%s): ".
* Removed unused rx_expected_seq_no from struct ast_udptl.
(closes issue ASTERISK-18401)
Reported by: Kevin P. Fleming
Patches:
jira_asterisk_18401_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Matthew Nicholson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316265 | russell | 2011-05-03 14:55:49 -0500 (Tue, 03 May 2011) | 5 lines
Fix a bunch of compiler warnings generated by gcc 4.6.0.
Most of these are -Wunused-but-set-variable, but there were a few others
mixed in here, as well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r308723 | mnicholson | 2011-02-24 09:06:14 -0600 (Thu, 24 Feb 2011) | 16 lines
Merged revisions 308722 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308722 | mnicholson | 2011-02-24 08:59:41 -0600 (Thu, 24 Feb 2011) | 9 lines
Merged revisions 308721 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308721 | mnicholson | 2011-02-24 08:54:56 -0600 (Thu, 24 Feb 2011) | 2 lines
silence gcc 4.2 compiler warning
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r308416 | mnicholson | 2011-02-21 09:02:20 -0600 (Mon, 21 Feb 2011) | 19 lines
Merged revisions 308414 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308414 | mnicholson | 2011-02-21 09:00:22 -0600 (Mon, 21 Feb 2011) | 12 lines
Merged revisions 308413 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308413 | mnicholson | 2011-02-21 08:57:15 -0600 (Mon, 21 Feb 2011) | 5 lines
Properly check the bounds of arrays when decoding UDPTL packets. Also, remove broken support for receiving UDPTL packets larger than 16k. That shouldn't ever happen anyway.
AST-2011-002
FAX-281
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304250 | mmichelson | 2011-01-26 15:02:10 -0600 (Wed, 26 Jan 2011) | 9 lines
Merged revisions 304242 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r304242 | mmichelson | 2011-01-26 14:38:37 -0600 (Wed, 26 Jan 2011) | 3 lines
Get rid of unused 'verbose' field in ast_udptl
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304252 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/795
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When decode_length returns the length there is a check to see if that
length is negative, if so the decode loop breaks as this means the
limit has been reached. The problem here is that length is an
unsigned int, so length can never be negative. This resulted in
an infinite loop.
(issue #17352)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(AST-377)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
FaxMaxDatagram field
AST-2010-001
(closes issue #16634)
Reported by: krn
(closes issue #16724)
Reported by: barthpbx
(closes issue #16517)
Reported by: bklang
(closes issue #16485)
Reported by: elsto
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
were introduced in r231692.
(closes issue #16497)
Reported by: globalnetinc
Patches:
udptl-max-ifp-fix1.diff uploaded by mnicholson (license 96)
Tested by: globalnetinc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1) Allow users of UDPTL stack to associate a character-string tag with a UDPTL
session, so that log/error/debug messages generated by the UDPTL stack can
be 'connected' to the endpoint that caused them to be generated.
2) Improve comments (and process) of calculating the far end's maximum IFP size
when redundancy mode is in use for error correction.
3) When an IFP larger than the calculated 'far max IFP' size is presented for
writing, truncate it rather than putting in the buffer and allowing the buffer
to overflow; this will cause the ends to retrain to a lower bit rate that
produces IFPs of an appropriate size if possible, and if not possible, the
FAX transfer will fail completely. In these cases, it is due to the one endpoint
supplying a T38FaxMaxDatagram value that is improperly calculated and is
too low to be of use; we have configuration options available to override
this behavior.
4) Eliminate use of T38FaxMaxDatagram value in udptl.conf; it is no longer
needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reviewboard: https://reviewboard.asterisk.org/r/416/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Many T.38 endpoints incorrectly send the maximum IFP frame size they can accept
as the T38FaxMaxDatagram value in their SDP, when in fact this value is
supposed to be the maximum UDPTL payload size (datagram size) they can accept.
If the value they supply is small enough (a commonly supplied value is '72'),
T.38 UDPTL transmissions will likely fail completely because the UDPTL packets
will not have enough room for a primary IFP frame and the redundancy used for
error correction. If this occurs, the Asterisk UDPTL stack will emit log messages
warning that data loss may occur, and that the value may need to be overridden.
This patch extends the 't38pt_udptl' configuration option in sip.conf to allow
the administrator to override the value supplied by the remote endpoint and
supply a value that allows T.38 FAX transmissions to be successful with that
endpoint. In addition, in any SIP call where the override takes effect, a debug
message will be printed to that effect. This patch also removes the
T38FaxMaxDatagram configuration option from udptl.conf.sample, since it has not
actually had any effect for a number of releases.
In addition, this patch cleans up the T.38 documentation in sip.conf.sample
(which incorrectly documented that T.38 support was passthrough only).
(issue #15586)
Reported by: globalnetinc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
chan_sip has had the ability to control T.38 FAX error correction mode on a per-peer
(or global) basis for a couple of releases now, which is where it should have been
all along. This patch removes the ability to configure it in udptl.conf, but issues
a warning if the user tries to do, telling them to look at sip.conf.sample for how
to configure it now. For any SIP peers that are T.38 enabled in sip.conf, there is
already a default for FEC error correction even if the user does not specify any mode,
so this change will not turn off error correction by default, it will have the same
default value that has been in the udptl.conf sample file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Some T.38 endpoints treat T38FaxMaxDatagram as the maximum IFP size that should
be sent to them, rather than the maximum packet payload size. If such an
endpoint also requests UDPRedundancy as the error correction mode, we'll end
up calculating a tiny maximum IFP size, so small as to be unusable. This patch
sets a lower bound on what we'll consider the remote's maximum IFP size to be,
assuming that endpoints that do this really can accept larger packets than
they've offered to accept.
(closes issue #15649)
Reported by: dazza76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209131 | mmichelson | 2009-07-27 12:44:06 -0500 (Mon, 27 Jul 2009) | 18 lines
Allow for UDPTL to use only even-numbered ports if desired.
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The udptl-updates branch that was merged yesterday failed to properly send back
T.38 SDP responses with the correct error correction mode, if the incoming SDP
from the other end caused us to change error correction modes. This patch
corrects that situation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208548 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175311 | tilghman | 2009-02-12 15:19:40 -0600 (Thu, 12 Feb 2009) | 9 lines
Fix crashes when receiving certain T.38 packets. Also, increase the maximum
size of T.38 packets and warn users when they try to set the limits above those
maximums.
(closes issue #13050)
Reported by: schern
Patches:
20090212__bug13050.diff.txt uploaded by Corydon76 (license 14)
Tested by: schern
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168603 | tilghman | 2009-01-14 13:02:55 -0600 (Wed, 14 Jan 2009) | 7 lines
Don't read into a buffer without first checking if a value is beyond the end.
(closes issue #13600)
Reported by: atis
Patches:
20090106__bug13600.diff.txt uploaded by Corydon76 (license 14)
Tested by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13990)
Reported by: eliel
Patches:
array_len.diff uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13848)
Reported by: klaus3000
Patches:
udptl.c.patch uploaded by eliel (license 64)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|