| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
|
|
Issue introduced in b59956a87. In the non-darwin case libastssl/pj
should be versioned. This causes the symbol file for this lib
to not be generated.
Change-Id: Ib07ae8c40252813c488e2c1ac6204fd42816dd4c
|
|
|
|
When a reading end of the network socket is closed by an AMI manager,
the EPIPE is signaled when writing to our end, resulting in the
spurious log error message
ast_careful_fwrite: fwrite() returned error: Broken pipe
Previously EPIPE was handled in ast_carefulwrite() a few lines above,
but not in this function.
ASTERISK-26753
Change-Id: I6a67335cd6526608bb9b78f796c626b1677664b8
|
|
|
|
|
|
|
|
|
|
* channel.c:ast_sendtext(): Fix T.140 SendText memory leak.
* format_compatibility.c: T.140 RED and T.140 were swapped.
* res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.
* res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
scheduled red_write().
* res_rtp_asterisk.c: Some other minor misc tweaks.
Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb
|
|
Change-Id: I32e6a589cf9009450e4ff7cb85c07c9d9ef7fe4a
|
|
* make_silence() created a malloced silence slin frame without adding a
slin format ref. When the frame is destroyed it will unref the slin
format that never had a ref added. Memory corruption is expected to
follow.
* Simplified and fixed counting the number of samples in a frame list for
make_silence().
* Eliminated an unnecessary RAII_VAR associated with the make_silence()
frame.
Change-Id: I47de3f9b92635b7f8b4d72309444d6c0aee6f747
|
|
* ast_frisolate() could leak frame format refs on allocation
failures.
* Similified code in ast_frisolate() and code used by
ast_frisolate().
Change-Id: I79566d4d36b3d7801bf0c8294fcd3e9a86a2ed6d
|
|
The 'ari set debug' command has been enhanced to accept 'all' as an
application name. This allows dumping of all apps even if an app
hasn't registered yet. To accomplish this, a new global_debug global
variable was added to res/stasis/app.c and new APIs were added to
set and query the value.
'ari set debug' now displays requests and responses as well as events.
This required refactoring the existing debug code.
* The implementation for 'ari set debug' was moved from stasis/cli.{c,h}
to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted.
* In order to print the body of incoming requests even if a request
failed, the consumption of the body was moved from the ari stubs
to ast_ari_callback in res_ari.c and the moustache templates were
then regenerated. The body is now passed to ast_ari_invoke and then
on to the handlers. This results in code savings since that template
was inserted multiple times into all the stubs.
An additional change was made to the ao2_str_container implementation
to add partial key searching and a sort function. The existing cli
code assumed it was already there when it wasn't so the tab completion
was never working.
Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf
|
|
The mechanism used for detecting the maximum log level compiled into the
linked pjproject did not work. The API call simply stores the requested
level into an integer and does no range checking. Asterisk was assuming
that there was range checking and limited the new value to the allowable
range. To get the actual maximum log level compiled into the linked
pjproject we need to get and save off the initial set log level from
pjproject. This is the maximum log level supported.
* Get and save off the initial log level setting before altering it to the
desired level on startup. This has to be done by a macro rather than
calling a core function to avoid incorrectly linking pjproject.
* Split the initial log level warning messages to warn if the linked
pjproject cannot support the requested startup level and if it is too low
to get the pjproject buildopts for "pjproject show buildopts".
* Adjust the CLI "pjproject set log level" to check the saved max log
level and to generate normal output messages instead of a warning message.
ASTERISK-26743 #close
Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4
|
|
It was possible for a frame to be re-inserted into a jitter buffer after it
had been removed from it. A case when this happened was if a frame was read
out of the jitterbuffer, passed to the translation core, and then multiple
frames were returned from said translation core. Upon multiple frames being
returned the first is passed on, but sebsequently "chained" frames are put
back into the read queue. Thus it was possible for a frame to go back into
the jitter buffer where this would cause problems.
This patch adds a flag to frames that are inserted into the channel's read
queue after translation. The abstract jitter buffer code then checks for this
flag and ignores any frames marked as such.
Change-Id: I276c44edc9dcff61e606242f71274265c7779587
|
|
The task processor queue reached X scheduled tasks message was originally
intended to get logged only once per task processor to prevent spamming
the log. This is no longer necessary since high and low water thresholds
can better control when the message is logged.
It is beneficial to generate the warning each time a task processor
reaches the high water level because PJSIP stops processing new requests
while any high water alert is active. Without this change you would have
to enable at least debug level 3 logging to know about a repeated alert
trigger.
* Made generate the warning message whenever a task is pushed into the
task processor that triggers the high water alert.
* Appended 'again' to the warning for a repeated high water alert trigger.
Change-Id: Iabf75a004f7edaf1e5e8c323099418e667cac999
|
|
* Made not generate strings unless they will actually be used.
ASTERISK-26672
Change-Id: I155fbe7fdff5ce47dfe5326f3baf5446849702c3
|
|
ASTERISK-25083
Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2
|
|
Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to
the CFLAGS. Not sure how they went missing.
Also fixed an uninstall problem where we weren't removing the
symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was
there, I fixed it for libasteriskssl as well.
Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556
|
|
|
|
|
|
|
|
|
|
|
|
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
|
|
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
|
|
The recent change that made frame deferral into an API had a behavior
change to it. When frame deferral was completed, we would take all of
the deferred frames and queue them all onto the channel in one call to
ast_queue_frame_head(). Before frame deferral was API-ized, places that
performed manual frame deferral would actually take each deferred frame
and queue them onto the channel.
This change in behavior caused the confbridge_recording test to start
failing consistently. Without going too crazily deep into the details,
a channel was getting "stuck" in an ast_safe_sleep(). An AMI redirect
was attempting to break it out of the sleep, but because there were more
frames in the channel read queue than expected, the channel ended up
being unable to break from its sleep loop.
By restoring the behavior of individual frame queuing after deferral,
the test starts passing again.
Note, this points to a potential underlying issue pointing to an
"unbalance" that can occur when queuing multiple frames at once,
and so a follow-up issue is being created to investigate that
possibility.
Change-Id: Ied5dacacda06d343dea751ed5814a03364fe5a7d
|
|
into 13
|
|
OpenSSL 1.1.0 includes some major changes in the interface. See
https://wiki.openssl.org/index.php/1.1_API_Changes .
Status: Right now there are still a few deprecation notes with OpenSSL
1.1.0. But it's a start.
Changes:
* CRYPTO_LOCK is no longer available. Replace it with its value for now.
I don't completely understand what it is used for there.
* Remove several functions from libasteriskssl that seem to no longer be
needed.
* Structures have become opaque and are accesses with accessors.
* ERR_remove_thread_state() no longer needed.
* SSLv2 code now could no longer be used in 1.1.
ASTERISK-26109 #close
Change-Id: I5e29d477d486ca29b6aae0dc2f5dff960c1cb82b
|
|
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a55b5425c7e9617eff8af8b45427144.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b982a18f7321adcf7c7a4e822d8b2714.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
|
|
When retrieving RTCP stats for PJSIP channels, RTT values are unreliable.
RTT calculation is correct, but the data representation isn't. RTT is
represented by a 32-bit fixed-point number with the integer part in the
first 16 bits and the fractional part in the last 16 bits. In order to
get the RTT value, the fractional part is miscalculated, there is an
unnecessary 16 bit shift that causes overflow. Besides this there is
another mistake, when transforming the integer value to the fixed point
fractional part via bitwise operation, that loses precision.
* RTT fractional part is no longer shifted, avoiding overflow.
* RTT fractional part is transformed to its fixed-point value more
precisely.
* Fixed timeval2ntp() and ntp2timeval() second fraction conversions.
* Fixed NTP timestamp report logging. The usec was inexplicably
multiplied by 4096.
ASTERISK-26566 #close
Reported by Hector Royo Concepcion
Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f
|
|
Previously, a TLS server socket would only be restarted upon sip reload if the
bind address had changed. This commit adds checking for changes to TLS
parameters like certificate, ciphers, etc. so they get picked up without
requiring a reload of the entire chan_sip module. This does not affect open
connections in any way, but new connections will use the new TLS parameters.
The changes also apply to HTTP and Manager.
ASTERISK-26604 #close
Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6
|
|
A while back, a master-only change was made to check for librt which
should probably have been cherry-picked to 13 at that time. Sometime
between then and now, part of that change did make it into 13 but it
was incomplete and non-functional. This patch backports the rest
of the librt check and allows the link of libasteriskpj to use the
results.
Change-Id: I1424008fd8c90f389dda53162ec4a340b253a3c1
|
|
|
|
ASTERISK-26562 #close
Change-Id: Ie6cb0ffc2b8c775639ce7784fe96f4ea00cfa2f8
|
|
OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
through 'xargs rm -rf'.
'echo -e' doesn't like \t starting a line. It just prints 't' which
causes the libasteriskpj.exports file to be garbage. They were just
cosmetic so they were removed.
librt doesn't exist so the link of libasteriskpj.so fails. It's not
actually needed for linux anyway so -lrt was removed from the link.
res_rtp_asterisk was failing to load because of an undefined
DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
so DTLSv1_method is used instead.
ASTERISK-26608
Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c
|
|
into 13
|
|
ASTERISK-26343
Change-Id: I06dbf7366e26028251964143454a77d017bb61c8
|
|
loaded." into 13
|
|
source" into 13
|
|
into 13
|
|
|
|
routine.""" into 13
|
|
|
|
When Opus is negotiated but not loaded, the log is spammed with messages
because the system does not know how to calculate the number of samples in
a frame.
* Suppress the warning by supplying a function that assumes 20ms of
samples in the frame. For pass through support it doesn't really seem to
matter what number of samples is returned anyway.
ASTERISK-26605 #close
Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f
|
|
verification." into 13
|
|
|
