Age | Commit message (Collapse) | Author |
|
This adds support for tagging functions with the noreturn attribute.
If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE
and DO_CRASH are enabled then failed assertions never return. This can
resolve a large number of false positives with static analyzers.
ASTERISK-26220 #close
Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753
|
|
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
|
|
adsi.h is no longer used by features.c since parking was moved to a
module.
Change-Id: I2248b8a455225a17cb6ddaafd6c20c511a1eaf59
|
|
|
|
This commit adds scaffolding in order to support the SILK audio format
on calls. Roughly, this is what is added:
* Cached silk formats. One for each possible sample rate.
* ast_codec structures for each possible sample rate.
* RTP payload mappings for "SILK".
In addition, this change overhauls the res_format_attr_silk file in the
following ways:
* The "samplerate" attribute is scrapped. That's native to the format.
* There are far more checks to ensure that attributes have been
allocated before attempting to reference them.
* We do not SDP fmtp lines for attributes set to 0.
These changes make way to be able to install a codec_silk module and
have it actually work. It also should allow for passthrough silk calls
in Asterisk.
Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e
|
|
|
|
into 13
|
|
|
|
|
|
Create include_free to run ast_destroy_timing and ast_free, use that in
all places that freed an ast_include structure. This fixes a couple of
paths that previously did not run ast_destroy_timing.
ASTERISK-26196 #close
Change-Id: I1671bd111bef0dc113e8bf8f77f89fcfc395d838
|
|
into 13
|
|
If the destination format's name differed from the codec name then the
translator's explict_dst field would be improperly set. In some circumstances
it would end up setting it to a newly created format that has the same name
as the codec when it actually needed to be the given destination codec.
This could cause the translation path to use the wrong format. For instance,
if an endpoint had specified 'myulaw' as a format the translator could end up
using a 'ulaw' format (with whatever/default settings) instead. If the format
attribute settings differed between the two then there may unexpected results
during processing.
This patch removes the name check when building the translation path. This
should make it always set the translator's explicit_dst to the given destination
format as long as the sample rate and types match.
Change-Id: Iaf8a03831d68e657d89569d54b505074efbefab5
|
|
The roundtrip_usec json member is optional. If it isn't present then
don't put it into the converted json structure where ast_json_pack()
will choke on it.
Change-Id: I39bb2f86154ef54591270c58bfda8635070f9ea0
|
|
ast_threadpool_serializer_group leaks a reference to ser when listener
is allocated but tps is not. Although listener takes the reference to
ser cleanup functions are not run without tps.
ASTERISK-26191 #close
Change-Id: Ie3ccf69a3f1e676c2ef62a77067c0cb57dc9a585
|
|
Thanks to ibercom for pointing out a memory leak that was missed
in the earlier patch for the issue.
ASTERISK-26119
Reported by: Alexei Gradinari
Change-Id: I9a151f5c4725d97fb82a9e938bc73dc659532b71
|
|
Using AO2_CONTAINER_ALLOC_OPT_DUPS_REPLACE can result in an unref being
recorded to the refs log for the node being replaced. This prevents
logging of those unrefs since they would produce errors in
refcounter.py.
ASTERISK-26181 #close
Change-Id: Ie4fded84e8a1a58b3a59ce59dfd7eb0da3ddc5d4
|
|
When res_corosync detects that a node leaves or joins, it currently is
informed of this via Corosync callbacks. However, there are a few
limitations with the information presented:
(1) While we have information that Corosync is aware of - such as the
Corosync nodeid - that information is really only useful inside of
Corosync or res_corosync. There's no way to translate a Corosync
nodeid to some other internally useful unique identifier for the
Asterisk instance that just joined or left the cluster.
(2) While res_corosync is notified of the instance joining or leaving
the cluster, it has no mechanism to inform the Asterisk core or
other modules of this event. This limits the usefulness of res_corosync
as a heartbeat mechanism for other modules.
This patch addresses both issues.
First, it adds the notion of a cluster discovery message both within the
Stasis message bus, as well as the binary event messages that
res_corosync uses to transmit data back and forth within the cluster.
When Asterisk joins the cluster, it sends a discovery message to the other
nodes in the cluster, which correlates the Corosync nodeid along with
the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids
to Asterisk EIDs, such that it can map changes in cluster state with the
Asterisk instance that has that nodeid. Likewise, when an Asterisk
instance receives a discovery message from a node in the cluster, it now
sends its own discovery message back to the originating node with the
local Asterisk EID. This lets Asterisk instances within the cluster
build a complete picture of the other Asterisk instances within the
cluster.
Second, it publishes the discovery messages onto the Stasis message bus.
Said messages are published whenever a node joins or leaves the cluster.
Interested modules can subscribe for the ast_cluster_discovery_type()
message under the ast_system_topic() and be notified when changes in
cluster state occur.
Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465
|
|
Found as a result of the testsuite tests/callparking test crashing.
Several calls to ast_get_chan_featuremap_config() and
ast_get_chan_features_xfer_config() did not lock the channel before
calling so the channel's datastore list was accessed without the lock's
protection. Apparently another thread deleted a datastore on the
channel's list while the crashing thread was walking the list. Crash at
0xdeaddead due to MALLOC_DEBUG's memory filler value as a result.
* Add missing channel locks to calls that were not already protected
as the doxygen for those calls indicates.
Change-Id: Id273b3d305cc616406c353cbc841b2b7655efaa1
|
|
Adding format_name even to the end of ast_codec caused issued with
binary codec modules because the pointer would be garbage in asterisk
when they registered. So, the ast_codec structure was reverted and an
internal_ast_codec structure was created just for use in codec.c. A new
internal-only API was also added (__ast_codec_register_with_format) so
that codec_builtin could register codecs with the format_name in a
separate parameter rather than in the ast_codec structure.
ASTERISK-26144 #close
Reported-by: Alexei Gradinari
Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba
|
|
gcc 6.1.1 caught a few more issues.
Made sure the unit tests still pass for the func_env and stdtime
issues.
ASTERISK-26157 #close
Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e
|
|
|
|
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch updates Sorcery to use "yes" and
"no"
ASTERISK-26128 #close
Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec
|
|
|
|
ASTERISK-26119 #close
Change-Id: Iecbf7d0f360a021147344c4e83ab242fd1e7512c
|
|
The internal HTTP/WebSocket server supports both TCP and TLS, which can be
activated separately via the file http.conf. The source code intends to re-use
the TCP parameter 'bindaddr' for TLS, even if 'tlsbindaddr' is not specified
explicitly. This did not work because of a typo. This change resolves this typo.
ASTERISK-26126 #close
Change-Id: I5efb0409ae12044dfb3495b6b97b6d40a8c9c51f
|
|
With CLI "core show settings", simply the parameter maxfiles of the file
asterisk.conf was shown. If that parameter was not set, nothing was displayed
although the environment might have set a default number itself. Or if maxfiles
were not granted (completely), still maxfiles was shown. Now, the maximum number
of possible file descriptors in the environment is shown.
ASTERISK-26097
Change-Id: I2df5c58863b5007b34b77adbe28b885dfcdf7e0b
|
|
|
|
|
|
|
|
|
|
CEL wrongly assumed that a channel would only have a single dial
event on it. This is incorrect. Particularly in a queue each
call attempt to a member will result in a dial event, adding
a new dial status in CEL without removing the old one. This
would cause the container to grow with only one dial status
being removed when the channel went away. The other dial status
entries would remain leaking memory.
This change fixes the memory leak by ensuring that only one dial
status will only ever exist for each channel.
The behavior during the scenario where multiple events are received
has also been improved. For failure cases the first failure will
be the dial status. If an answer dial status is received, though,
it will take priority and the dial status for the channel will be
answer.
Memory usage has also been decreased by storing the minimal
amount of information and the code has been cleaned up slightly.
ASTERISK-25262 #close
Change-Id: I5944eb923db17b6a0faa7317ff6abc9307c009fe
|
|
descriptors." into 13
|
|
|
|
|
|
With menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", the maximum size of a
single file was shown. Now, the maximum number of possible file descriptors is
shown.
ASTERISK-26097
Change-Id: Icf98d145774b38cac144ca76d19eaef42ce659a3
|
|
into 13
|
|
POSIX defines poll.h, sys/poll.h should not be used at is c-library
internal header which may or may not exist. Notable in musl it
generates warning of being incorrect. And add explict include of
sys/cdefs.h where needed.
Change-Id: I142930df53fe7585a06b854b6faddc5301e024be
|
|
Stasis subscriptions and message routers create taskprocessors to process
the event messages. API calls are needed to be able to set the congestion
levels of these taskprocessors for selected subscriptions and message
routers.
* Updated CDR, CEL, and manager's stasis subscription congestion levels
based upon stress testing. Increased the congestion levels to reduce the
potential for bursty call setup/teardown activity from triggering the
taskprocessor overload alert. CDRs in particular need an extra high
congestion level because they can take awhile to process the stasis
messages.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: Id0a716394b4eee746dd158acc63d703902450244
|
|
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
|
|
When taskprocessors get backed up, there is a good chance that we are
being overloaded and need to defer adding new work to the system.
* Implemented a high/low water alert mechanism for modules to check if the
system is being overloaded and take appropriate action. When a
taskprocessor is created it has default congestion levels set. A
taskprocessor can later have those congestion levels altered for specific
needs if stress testing shows that the taskprocessor is a symptom of
overloading or needs to handle bursty activity without triggering an
overload alert.
* Add CLI "core show taskprocessor" low/high water columns.
* Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was
never a good thing to use when creating a taskprocessor because of the
nature of how its references needed to be cleaned up on a partial
creation.
* Made res_pjsip's distributor check if the taskprocessor overload alert
is active before placing a message representing brand new work onto a
distributor serializer.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I182f1be603529cd665958661c4c05ff9901825fa
|
|
In several internal library projects, the files are archived with the help of
'ar cr'. Only the projects editline and the Objective Open H.323 stack
implementation in C (ooh323c) use 'ar cru' instead. Recently, some platforms
changed the default parameters of AR which creates "/usr/bin/ar: `u' modifier
ignored since `D' is the default (see `U')". For consistency and to avoid this
message all projects use 'ar cr' now.
ASTERISK-26091 #close
Change-Id: I710a9b1c01c1b5a1931a646098c044c8161ead40
|
|
|
|
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
|
|
The stringfields refactor to allow adding stringfields to the end of a
structure (f6f4cf459f43f072604927209b39646f84aaa2e2) exposed some
incomplete cleanup code by some stringfield users.
The most noticeable leaker is the logging system where there is a leak for
every log message generated.
ASTERISK-26078 #close
Reported by: Etienne Lessard
Patches:
jira_asterisk_26078_v13.patch (license #5621) patch uploaded
by Richard Mudgett
Change-Id: If6a08b31336b492c3de6f9dfd07c447f8d5a8782
|
|
Added a new channel variable FORWARDERNAME which indicates which
channel was responsible for a forwarding requests received on dial attempt.
Fixed a bug in the app_queue: FORWARD_CONTEXT is not used.
ASTERISK-26059 #close
Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2
|
|
|
|
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
|
|
worker_start checked for ZOMBIE status without holding a lock. All
other read/write of worker status are performed with a lock, so this
check should do the same.
ASTERISK-25777 #close
Change-Id: I5e33685a5c26fdb300851989a3b82be8c4e03781
|
|
Scenario:
Local fax -> Asterisk w/ firewall -> Provider -> Remote fax
* Local fax starts rtp call to remote fax
* Remote fax starts t38 call back to local fax.
* Local fax sends t38 no-signal to Asterisk before sending an OK.
* udptl processes the frame and increments the expected sequence number.
* chan_sip drops the frame because the call isn't up so nothing goes out
the external interface to open the port for incoming packets.
* Local fax sends OK and Asterisk sends OK to the remote fax.
* Remote fax sends t38 packets which are dropped by the firewall.
* Local fax re-sends t38 no-signal with the same sequence number.
* udptl drops the frame because it thinks it's a dup.
* Still no outgoing packets to open the firewall.
* t38 negotiation fails.
The patch drops frames t38 received before udptl sequence processing
when the call hasn't been answered yet. The second no-signal frame
is then seen as new and is relayed out the external interface which
opens the port and allows negotiation to continue.
ASTERISK-26034 #close
Change-Id: I11744b39748bd2ecbbe8ea84cdb4f3c5943c5af9
|
|
|