| Age | Commit message (Collapse) | Author |
|---|
|
The localtime management in the Asterisk core contains a thread that watches
for changes in the local timezone. On systems where the directory containing
/etc/localtime is modified frequently, the thread monitoring the changes will
be woken up to determine if any changes in timezone have occurred. When using
kqueue(2), this can cause a leak of file descriptors due to some improper
management of resources.
This patch updates the kqueue(2) handling in localtime, such that is no longer
leaks resources.
Review: https://reviewboard.asterisk.org/r/4450/
ASTERISK-24739 #close
Reported by: Ed Hynan
patches:
11.15.0-u.diff uploaded by Ed Hynan (Licnese 6680)
11.7.0-u.diff uploaded by Ed Hynan (License 6680)
svn-trunk-Jan-26-2015-u.diff uploaded by Ed Hynan (License 6680)
........
Merged revisions 432691 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a 'core restart now' or 'core stop now' is executed and a channel is
currently in a media operation, the translator matrix can be destroyed while a
channel is currently blocked on getting the best translation choice
(see ast_translator_best_choice). When the channel gets the mutex, the
translation matrix now has invalid memory, and Asterisk crashes.
This patch does two things:
(1) We now only clean up the translation matrix on a graceful shutdown. In that
case, there are no channels, and so there is no risk of this occurring.
(2) We also now set the __matrix and __indextable to NULL. In some initial
backtraces when this occurred, it looked as if there was a memory corruption
occurring, and it wasn't until we determined that something had restarted
Asterisk that the issue became clear. By setting these to NULL on shutdown,
it becomes a bit easier to determine why a crash is occurring.
Note that we could litter the code with NULL checks on the __matrix, but the
act of making the translation matrix cleaned up on shutdown should preclude
this issue from occurring in the first place, and this part of the code needs
to be as fast as possible.
Review: https://reviewboard.asterisk.org/r/4457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Sending the following ARI commands caused Asterisk to crash if the JSON
body 'variables' object passes values of types other than strings.
POST /ari/channels
POST /ari/channels/{channelid}
PUT /ari/endpoints/sendMessage
PUT /ari/endpoints/{tech}/{resource}/sendMessage
* Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
ast_ari_endpoints_send_message_to_endpoint().
ASTERISK-24751 #close
Reported by: jeffrey putnam
Review: https://reviewboard.asterisk.org/r/4447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds a self-destruction option to the
dial api. The usefulness of this is mostly when
using async mode to spawn a separate thread used
to handle the new call, while the calling thread
is allowed to go on about other business.
The only alternative to this option would be the
calling thread spawning a new thread, or hanging
around itself waiting to destroy the dial struct
after completion.
Example of use (minus error checking):
struct ast_dial *dial = ast_dial_create();
ast_dial_append(dial, "PJSIP", "200", NULL);
ast_dial_option_global_enable(dial, AST_DIAL_OPTION_ANSWER_EXEC, "Echo");
ast_dial_option_global_enable(dial, AST_DIAL_OPTION_SELF_DESTROY, NULL);
ast_dial_run(dial, NULL, 1);
The dial_run call will return almost immediately
after spawning the new thread to run and monitor
the dial. If the call is answered, it is placed
into the echo app. When completed, it will call
ast_dial_destroy() on the dial structure.
Note that any allocations made to pass values to
ast_dial_set_user_data() or dial options must be
free'd in a state callback function on any of:
AST_DIAL_RESULT_UNASWERED,
AST_DIAL_RESULT_ANSWERED,
AST_DIAL_RESULT_HANGUP, or
AST_DIAL_RESULT_TIMEOUT.
Review: https://reviewboard.asterisk.org/r/4443/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Fixed a couple of frame leaks that were found during testing.
ASTERISK-24828 #close
Reported by: John Hardin
Review: https://reviewboard.asterisk.org/r/4445/
........
Merged revisions 432362 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, SDP offers negotiating SDES-SRTP crypto attributes would
be rejected if those crypto attributes contained either a key lifetime or a
MKI parameter. While from a theoretical point of view this was defensible -
Asterisk does not support key lifetimes or multiple crypto keys - from a
practical point of view, this is quite a problem. A large number of endpoints
offer lifetimes/MKI, which Asterisk can tolerate so long as it doesn't actually
have to support anything more than a single key or refresh the key.
In reality, this is (so far as we've seen) always the case.
This patch is a forward port of Olle's work in the lingon-srtp-key-lifetime-1.8
branch. To quote Olle from ASTERISK-17721, it handles lifetime/MKI parameters
in the following fashion:
> The Lingon branch now handle lifetime and MKI parameters.
>
> We only accept lifetimes up to max for the crypto and higher than 10 hours
> for packetization of 20 ms (50 pps).
>
> We only handle MKI with index 1.
>
> We do not really bother with counting packets and reinviting at end of
> lifetime, so the min of 10 hours kind of takes care of most calls. If there
> are longer ones, we rely on the other side for re-invites.
>
> It's still not perfect, but I personally think this is an improvement. A
> configuration option for minimum lifetime accepted could be added.
When the patch was ported forward, I decided against adding a configuration
option as Olle's handling was more than sufficient for every case I've seen
come through the issue tracker or through interoperability testing. We can
revisit that decision if it proves to be false.
A few small other tweaks were made to the surrounding code to reduce
indentation and provide better type safety for the 'tag' parameter.
Review: https://reviewboard.asterisk.org/r/4419/
Review: https://reviewboard.asterisk.org/r/4418/
ASTERISK-17721 #close
Reported by: Terry Wilson
ASTERISK-17899 #close
Reported by: Dwayne Hubbard
patches:
lingon-srtp-key-lifetime-1.8.diff uploaded by oej (License 5267)
ASTERISK-20233
Reported by: tootai
ASTERISK-22748
Reported by: Alejandro Mejia
........
Merged revisions 432239 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses the following problems:
* ari/resource_channels: In ARI, we currently create a format capability
structure of SLIN and apply it to the new channel being created. This was
originally done when the PBX core was used to create the channel, as there
was a condition where a newly created channel could be created without any
formats. Unfortunately, now that the Dial API is being used, this has two
drawbacks:
(a) SLIN, while it will ensure audio will flows, can cause a lot of
needless transcodings to occur, particularly when a Local channel is
created to the dialplan. When no format capabilities are available, the
Dial API handles this better by handing all audio formats to the requsted
channels. As such, we defer to that API to provide the format
capabilities.
(b) If a channel (requester) is causing this channel to be created, we
currently don't use its format capabilities as we are passing in our own.
However, the Dial API will use the requester channel's formats if none
are passed into it, and the requester channel exists and has format
capabilities. This is the "best" scenario, as it is the most likely to
create a media path that minimizes transcoding.
Fixing this simply entails removing the providing of the format capabilities
structure to the Dial API.
* chan_pjsip: Rather than blindly picking the first format in the format
capability structure - which actually *can* be a video or text format - we
select an audio format, and only pick the first format if that fails. That
minimizes the weird scenario where we attempt to transcode between video/audio.
* res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
Since ast_request already limits us down to one format capability once the
format capabilities are passed along, there's no reason to squelch it here.
* channel: Fixed a comment. The reason we have to minimize our requested
format capabilities down to a single format is due to Asterisk's inability
to convey the format to be used back "up" a channel chain. Consider the
following:
PJSIP/A => L;1 <=> L;2 => PJSIP/B
g,u,a g,u,a g,u,a u
That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
channel has inherited those format capabilities down the line; PJSIP/B
supports only ulaw. According to these format capabilities, ulaw is
acceptable and should be selected across all the channels, and no
transcoding should occur. However, there is no way to convey this: when L;2
and PJSIP/B are put into a bridge, we will select ulaw, but that is not
conveyed to PJSIP/A and L;1. Thus, we end up with:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
g g X u u
Which causes g722 to be written to PJSIP/B.
Even if we can convey the 'ulaw' choice back up the chain (which through
some severe hacking in Local channels was accomplished), such that the chain
looks like:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
u u u u
We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
with only 'ulaw'. This results in all the channel structures being set up
correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
apart.
There's a lot of difficulty just in setting this up, as there are numerous
race conditions in the act of bridging, and no clean mechanism to pass the
selected format backwards down an established channel chain. As such, the
best that can be done at this point in time is clarifying the comment.
Review: https://reviewboard.asterisk.org/r/4434/
ASTERISK-24812 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ASTERISK-24724 #close
Reported by: Ashley Sanders
........
Merged revisions 432078 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Change __ast_module_shutdown_ref to be NULL safe (11+).
* Allow modules that call ast_bucket_scheme_register or ast_codec_register
to be unloaded during graceful shutdown only (13+ only).
ASTERISK-24796 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4428/
........
Merged revisions 432058 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432059 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
association.
Processing an AOC-E event that does not or no longer has a channel
association causes a crash.
The problem with posting AOC events to the channel topic is that AOC-E
events don't always have a channel association and posting the event to
the all channels topic is just wrong. AOC-E events do however have their
own charging association method to refer to the agreement with the
charging entity.
* Changed the AOC events to post to the AMI manager topic instead of the
channel topics. If a channel is associated with the event then channel
snapshot information is supplied with the AMI event.
* Eliminated RAII_VAR() usage in aoc_to_ami() and ast_aoc_manager_event().
This patch supercedes the patch on Review: https://reviewboard.asterisk.org/r/4427/
ASTERISK-22670 #close
Reported by: klaus3000
ASTERISK-24689 #close
Reported by: Marcel Manz
ASTERISK-24740 #close
Reported by: Panos Gkikakis
Review: https://reviewboard.asterisk.org/r/4430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Some distributions are going to disable SSLv3 at compile time. This option can
be checked using the directive OPENSSL_NO_SSL3_METHOD. This patch updates the
TCP/TLS handling in Asterisk to look for that directive before attempting to
use the SSLv3 specific methods.
ASTERISK-24799 #close
Reported by: Alexander Traud
patches:
no-ssl3-method.patch uploaded by Alexander Traud (License 6520)
........
Merged revisions 431936 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Added ast_sched_clean_by_callback for cleanup of scheduled events
that have not yet fired.
* Run all pending peercnt_remove_cb and replace_callno events in chan_iax2.
Cleanup of replace_callno events is only run 11, since it no longer
releases any references or allocations in 13+.
ASTERISK-24451 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4425/
........
Merged revisions 431916 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and it isn't found.
ASTERISK-24612 #close
Reported by: Joshua Colp
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add ast_module_shutdown_ref for use by modules that can
only be unloaded during graceful shutdown.
When REF_DEBUG is enabled:
* Add an empty ao2 object to struct ast_module.
* Allocate ao2 object when the module is loaded.
* Perform an ao2_ref in each place where mod->usecount is manipulated.
* ao2_cleanup on module unload.
ASTERISK-24479 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4141/
........
Merged revisions 431662 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In this collection of small patches to prevent
Valgrind errors are: fixes for reference leaks
in config hooks, evaluating a parameter beyond
bounds, and accessing a structure after a lock
where it could have been already free'd.
Review: https://reviewboard.asterisk.org/r/4407/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The act of defining wizards for an object type in sorcery.conf will
create a minimal object type. This can cause a problem when a module
has multiple sorcery instances (which all get the wizards from sorcery.conf
applied) but the sorcery instances do not all contain full information
about the object types. Upon loading errors will occur stating that
the objects can not be created. This is confusing and is actually
perfectly fine.
This change makes it so that only object types which have been fully
defined will be loaded.
ASTERISK-24748 #close
Reported by: Joshua Colp
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a new config property [servername] to the http.conf file; updated the http server to use the new property when sending responses, for showing http status through the CLI and when reporting status through the 'httpstatus' webpage.
ASTERISK-24316 #close
Reported By: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These memory leaks were found and fixed by John Hardin. I'm just
committing them for him.
ASTERISK-24736 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4389
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When swapping a Local channel in place of one already
in a bridge (to complete a bridge attended transfer),
the channel that was swapped out can actually be hung
up before the stasis bridge push callback executes on
the independant transfer thread. This results in the
stasis app loop dropping out and removing the control
that has the the app name which the local replacement
channel needs so it can re-enter stasis.
To avoid this race condition a new push_peek callback
has been added, and called from the ast_bridge_impart
thread before it launches the independant thread that
will complete the transfer. Now the stasis push_peek
callback can copy the stasis app name before the swap
channel can hang up.
ASTERISK-24649
Review: https://reviewboard.asterisk.org/r/4382/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Performing a CLI "module reload" command when there are new pjsip.conf
registration objects defined frequently failed to load them correctly.
What happens is a race condition between res_pjsip pushing its reload into
an asynchronous task processor task and the thread that does the rest of
the reloads when it gets to reloading the res_pjsip_outbound_registration
module. A similar race condition happens between a reload and the CLI/AMI
show registrations commands. The reload updates the current_states
container and the CLI/AMI commands call get_registrations() which builds a
new current_states container.
* Made res_pjsip.c reload_module() use ast_sip_push_task_synchronous()
instead of ast_sip_push_task() to eliminate two threads processing config
reloads at the same time.
* Made get_registrations() not replace the global current_states container
so the CLI/AMI show registrations command cannot interfere with reloading.
You could never add/remove objects in the container without the
possibility of the container being replaced out from under you by
get_registrations().
* Added a registration loaded sorcery instance observer to purge any dead
registration objects since get_registrations() cannot do this job anymore.
The struct ast_sorcery_instance_observer callbacks must be used because
the callback happens inline with the load process. The struct
ast_sorcery_observer callbacks are pushed to a different thread.
* Added some global current_states NULL pointer checks in case the
container disappears because of unload_module().
* Made sorcery's struct ast_sorcery_instance_observer.object_type_loaded
callbacks guaranteed to be called before any struct
ast_sorcery_observer.loaded callbacks will be called.
* Moved the check for non-reloadable objects to before the sorcery
instance loading callbacks happen to short circuit unnecessary work.
Previously with non-reloadable objects, the sorcery instance
loading/loaded callbacks would always happen, the individual wizard
loading/loaded would be prevented, and the non-reloadable type logging
message would be logged for each associated wizard.
ASTERISK-24729 #close
Review: https://reviewboard.asterisk.org/r/4381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
While running through some scenarios using chan_sip and tcp a problem would
occur that resulted in a flood of bad file descriptor messages on the cli:
tcptls.c:712 ast_tcptls_server_root: Accept failed: Bad file descriptor
The message is received because the underlying socket has been closed, so is
valid. This is probably happening because unloading of chan_sip is not atomic.
That however is outside the scope of this patch. This patch simply stops the
logging of multiple occurrences of that message.
ASTERISK-24728 #close
Reported by: Thomas Thompson
Review: https://reviewboard.asterisk.org/r/4380/
........
Merged revisions 431218 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions it was removed until the
problem could be resolved. This patch is the original patch plus some added
locking around stasis router subcription that was needed to avoid the memory
corruption.
Description of the original problem and patch (still applicable):
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4363/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
direct media.
This change fixes two issues:
1. During a swap operation bridging added the new channel before having the swap channel
leave. This was not handled in bridge_native_rtp and could result in a channel not getting
reinvited back to Asterisk. After this change the swap channel will leave first and the
new channel will then join.
2. If a re-invite was received after a session had been established any upstream elements
(such as bridge_native_rtp) were not notified that they may want to re-evaluate things.
After this change an UPDATE_RTP_PEER control frame is queued when this situation occurs
and upstream can react.
AST-1524 #close
Review: https://reviewboard.asterisk.org/r/4378/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, ModuleLoad would respond with an error indicating that
the requested module wasn't found in spite of finding and reloading the
module.
Review: https://reviewboard.asterisk.org/r/4373/
ASTERISK-24721 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses compilation errors on OS X. It's been a while, so
there's quite a few things.
* Fixed __attribute__ decls in route.h to be portable.
* Fixed htonll and ntohll to work when they are defined as macros.
* Replaced sem_t usage with our ast_sem wrapper.
* Added ast_sem_timedwait to our ast_sem wrapper.
* Fixed some GCC 4.9 warnings using sig*set() functions.
* Fixed some format strings for portability.
* Fixed compilation issues with res_timing_kqueue (although tests still fail
on OS X).
* Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue
on OS X).
ASTERISK-24539 #close
Reported by: George Joseph
ASTERISK-24544 #close
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/4327/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a crash was fixed due to usage of the REALTIME function in r423003, a
regression was introduced into ast_update2_realtime where the update fields
passed to the function would be skipped and the lookup field processed twice.
The use of this function is a bit interesting: A variable argument list is
used with two sentinel values - the first marks the end of the lookup
fields/values; the second marks the end of the update fields/values.
Unfortunately, ast_update2_realtime parses over the lookup fields twice, as
opposed to parsing over the update fields. This causes the lookups to succeed,
but the updates itself to have no effect.
Note that the most common instance of this problem occurred in app_voicemail
during the updating of a mailbox password.
Thanks to the issue reporter, Paddy Grice, for pointing out the problem.
Review: https://reviewboard.asterisk.org/r/4356/
ASTERISK-24231
ASTERISK-24626 #close
Reported by: Paddy Grice
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 430996 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When code imparts a channel into a bridge to swap with another channel, a
ref needs to be held on the swap channel to ensure that it cannot
dissapear before finding it in the bridge.
* The ast_bridge_join() swap channel parameter now always steals a ref for
the swap channel. This is the only change to the bridge framework's
public API semantics.
* bridge_channel_internal_join() now requires the bridge_channel->swap
channel to pass in a ref.
ASTERISK-24649
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4354/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When the RTCP reports are created, the NTP timestamps are stored as strings,
as JSON does not have an integer type long enough to store the value. However,
on 32-bit systems, a signed long may overflow for some portion of the
timestamp.
This patch corrects the overflow by formatting the timestamps as unsigned
longs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a hint gets created, any subsequent device or presence
state changes result in extension status events getting sent
out to interested parties. However, at the time of hint creation,
no such event gets sent out, so watchers of extension state are
potentially left in the dark until the first state change after
hint creation.
Patch contributed by John Hardin (License #6512)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions the patch is
being removed until the problem can be resolved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4311/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Reverted the change to astman_send_listack() to not use the listflag
parameter and always set the value to "Start" so the start capitalization
is consistent. Unfortunately changing the case of a returned value is not
a backward compatible change so for now FAXSessions is going to have to
remain inconsistent with all of the other AMI list actions.
* Reverted the minor protocol error fix in action_getconfig() when no
requested categories are found. Each line needs to be formatted as
"Header: text".
Caught by the testsuite.
ASTERISK-24049
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The security event log uses a dynamic log level (SECURITY) that is registered
with the Asterisk logging core. Unfortunately, the syslog would ignore log
statements that had a dynamic log level associated with them. Because the
syslog cannot handle ad hoc dynamic log levels, this patch treats any dynamic
log entries sent to the syslog as logs with a level of NOTICE.
ASTERISK-20744 #close
Reported by: Michael Keuter
Tested by: Michael L. Young, Jacek Konieczny
patches:
asterisk-20744-syslog-dynamic-logging_trunk.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 430506 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When app_bridge grabs a channel and puts it into
a bridge, the channel should then continue where
it left off in the dialplan after the bridge has
ended. Although it stores the current dialplan
location as an after bridge goto on the channel,
it was executing the same priority again instead
of going to the next priority. By swapping the
"specific" version of bridge_set_after_goto with
bridge_set_after_go_on, the next priority in the
dialplan is executed instead.
ASTERISK-24637 #close
Review: https://reviewboard.asterisk.org/r/4322/
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Let's say you have a template T with variable VAR1 = ON and you have a
context C(T) that doesn't specify VAR1. If you read C, the effective value
of VAR1 is ON. Now you change T VAR1 to OFF and call
ast_config_text_file_save. The current behavior is that the file gets
re-written with T/VAR1=OFF but C/VAR1=ON is added. Personally, I think this
is a bug. It's preserving the effective state of C even though I didn't
specify C/VAR1 in th first place. I believe the behavior should be that if
I didn't specify C/VAR1 originally, then the effective value of C/VAR1 should
continue to follow the inherited state. Now, if I DID explicitly specify
C/VAR1, the it should be preserved even if the template changes.
Even though I think the existing behavior is a bug, it's been that way forever
so I'm not changing it. Instead, I've created ast_config_text_file_save2()
that takes a bitmask of flags, one of which is to preserve the effective context
(the current behavior). The original ast_config_text_file_save calls *2 with
the preserve flag. If you want the new behavior, call *2 directly without a
flag.
I've also updated Manager UpdateConfig with a new parameter
'PreserveEffectiveContext' whose default is 'yes'. If you want the new behavior
with UpdateConfig, set 'PreserveEffectiveContext: no'.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A blond transfer to a failed destination, when followed
by a recall attempt, lead to a leak of the reference to
the destination channel. In addition to correcting the
regression on the previous attempt (r429826) this fixes
the leak and two additional reference leaks on failures
of bridge_import.
ASTERISK-24513 #close
Review: https://reviewboard.asterisk.org/r/4302/
........
Merged revisions 430199 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
After the initial DTMF atxfer call attempt to the transfer target fails to
answer during a blonde transfer, the recall callback channels do not get
setup with information from the initial transferrer channel. As a result,
the recall callback to the transferrer does not have callid, channel
variables, datastores, accountcode, peeraccount, COLP, and CLID setup. A
similar situation happens with the recall callback to the transfer target
but it is less visible. The recall callback to the transfer target does
not have callid, channel variables, datastores, accountcode, peeraccount,
and COLP setup.
* Added missing information to the recall callback channels before
initiating the call. callid, channel variables, datastores, accountcode,
peeraccount, COLP, and CLID
* Set callid of the transferrer channel on the DTMF atxfer controller
thread attended_transfer_monitor_thread().
* Added missing channel unlocks and props unref to off nominal paths in
attended_transfer_properties_alloc().
ASTERISK-23841 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The QUEUESTART log entry has historically acted like a fully booted event
for the queue_log file. When the QUEUESTART entry was posted to the log
was broken by the change made by ASTERISK-15863.
* Made post the QUEUESTART queue_log entry when Asterisk fully boots.
This restores the intent of that log entry and happens after realtime has
had a chance to load.
AST-1444 #close
Reported by: Denis Martinez
Review: https://reviewboard.asterisk.org/r/4282/
........
Merged revisions 430009 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
startup.
The named ACL code incorrectly destroyed the config options information if loading
of the configuration file failed at startup. This would result in reloading
also failing even if a valid configuration file was put in place.
ASTERISK-23733 #close
Reported by: Richard Kenner
........
Merged revisions 429893 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
After a blond transfer (start attended and hang up)
to a destination that also hangs up without answer,
the Local;1 channel was leaked and would show up on
core show channels. This was happening because the
attended state blond_nonfinal_enter() resetting the
props->transfer_target to null while releasing it's
own reference, which would later prevent props from
releasing another reference during destruction. The
change made here is simply to not assign the target
to NULL.
ASTERISK-24513 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4262/
........
Merged revisions 429826 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The AST_FLAG_BRIDGE_DUAL_REDIRECT_WAIT flag was created to prevent bridges from
prematurely acting on orphaned channels in bridges. The problem with the AMI
redirect action was that it was setting this flag on channels based on the presence
of a PBX, not whether the channel was in a bridge. Whether a channel has a PBX
is irrelevant, so the condition has been altered to check if the channel is in a
bridge.
ASTERISK-24536 #close
Reported by Niklas Larsson
Review: https://reviewboard.asterisk.org/r/4268
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429741 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
No functionality change. Just move the definition of ast_module_reload
from _private.h to module.h so it can be public.
Also removed the include of _private.h from manager.c since ast_module_load
was the only reason for including it.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch started with David Lee's patch at
https://reviewboard.asterisk.org/r/2826/ and includes a regression fix
introduced by the ASTERISK-22455 patch.
The initialization of a mutex's lock tracking structure was not protected
in a critical section. This is fine for any mutex that is explicitly
initialized, but a static mutex may have its lock tracking double
initialized if multiple threads attempt the first lock simultaneously.
* Added a global mutex to properly serialize initialization of the lock
tracking structure. The painful global lock can be mitigated by adding a
double checked lock flag as discussed on the original review request.
* Defer lock tracking initialization until first use.
* Don't be "helpful" and initialize an uninitialized lock when
DEBUG_THREADS is enabled. Debug code is not supposed to fix or change
normal code behavior. We don't need a lock initialization race that would
force a re-setup of lock tracking. Lock tracking already handles
initialization on first use.
* Properly handle allocation failures of the lock tracking structure.
* No need to initialize tracking data in __ast_pthread_mutex_destroy()
just to turn around and destroy it.
The regression introduced by ASTERISK-22455 is the result of manipulating
a pthread_mutex_t struct outside of the pthread library code. The
pthread_mutex_t struct seems to have a global linked list pointer member
that can get changed by other threads. Therefore, saving and restoring
the contents of a pthread_mutex_t struct is a bad thing.
Thanks to Thomas Airmont for finding this obscure regression.
* Don't overwrite the struct ast_lock_track.reentr_mutex member to restore
tracking data in __ast_cond_wait() and __ast_cond_timedwait(). The
pthread_mutex_t struct must be treated as a read-only opaque variable.
Miscellaneous other items fixed by this patch:
* Match ast_suspend_lock_info() with ast_restore_lock_info() in
__ast_cond_timedwait().
* Made some uninitialized lock sanity checks return EINVAL and try a
DO_THREAD_CRASH.
* Fix bad canlog initialization expressions.
ASTERISK-24614 #close
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/4247/
Review: https://reviewboard.asterisk.org/r/2826/
........
Merged revisions 429539 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When shutting down Asterisk the codecs are cleaned up. As a result anything
attempting to get a codec based on ID or details will find that no codec
exists. This currently occurs when determining the sample count of a frame.
This code did not take this situation into account.
This change fixes this by getting the codec directly from the format and
eliminates the lookup. This is both faster and also provides a guarantee
that the codec will exist and will be valid.
ASTERISK-24604 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4260/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
