| Age | Commit message (Collapse) | Author |
|---|
|
Upcoming features will require the generation and persistence
of a UUID.
Change-Id: I3ec0062427e133217db6ef496a4216f427c3b92d
|
|
SILK is a bit of a hog when it comes to using up our limited number of
dynamic payload types in the RTP engine. By freeing up four slots, it
allows for other codecs to potentially take the place.
Now, codec_silk.so will dynamically use the payload slots in the RTP
engine when it loads.
A better fix would be make RTP dynamic payload types actually
dynamic. However, at this stage of Asterisk 14 development, this is a
risky move that would be imprudent.
Change-Id: I5774e09408f9a203db189529eabdc0d3f4c1e612
(cherry picked from commit d50895c7b04036aeaad58990089399e46db4c817)
|
|
|
|
|
|
|
|
|
|
|
|
This adds a two strings to ast_exten. name to go with exten and
cidmatch_display to go with cidmatch. The new fields contain input used
to add the extension in the first place. The existing fields now
contain stripped input that excludes insignificant spaces and dashes.
These stripped fields should always be used for comparisons. The
unstripped fields should normally be used for display, but displaying
stripped values will not cause runtime errors.
Note the actual string is only stored twice if it contains dashes. If
no dashes are found then both 'char *' fields point to the same memory.
So this change has a minimum effect on memory usage.
The existing functions ast_get_extension_name and
ast_get_extension_cidmatch return unstripped values as they did before
this change. Other similar bugs likely still exist where unstripped
extensions are saved outside pbx.c then passed back in.
ASTERISK-26233 #close
Change-Id: I6cd61ce57acc1570ca6cc14960c4c3b0a9eb837f
|
|
We can allow dangerous functions when adding a hint since altering
dialplan is itself a privileged activity. Otherwise, we could never
execute dangerous functions.
ASTERISK-25996 #close
Reported by: Andrew Nagy
Change-Id: I4929ff100ad1200a0198262d069a34f2296e77ba
|
|
Fixed an assert check that would trigger when the passed in value was negative.
The negative value was being cast to an unsigned value. This resulted in the
check failing.
Also fixed another problem when loading formats in the engine. When setting the
mime type the format's name was being passed in instead of the codec's name.
Change-Id: I1a201cd419ba4d8e9a40d337e36b6fbe1737192c
|
|
* Add fax amplitude and frequency sweep tests.
* Add DTMF amplitude and twist unit tests.
Change-Id: I8d77c9a1eec89e440d715f998c928687e870c3f7
|
|
* Added doxygen to describe some struct members and what is going on in
the code.
Change-Id: I2ec706a33b52aee42b16dcc356c2bd916a45190d
|
|
Change-Id: Ia131da3ec29acf385cb43a586a29ecc975eb3896
|
|
The Goertzel calculations get less accurate the lower the signal level
being worked with becomes because there is less resolution remaining.
If it is too low we can erroneously detect a tone where none really
exists. The searched for fax frequencies not only need to be so much
stronger than the background noise they must also be a minimum strength.
* Add needed minimum threshold test to tone_detect().
* Set TONE_THRESHOLD to allow low volume frequency spread detection.
ASTERISK-26237 #close
Reported by: Richard Mudgett
Change-Id: I84dbba7f7628fa13720add6a88eae3b129e066fc
|
|
|
|
This adds support for tagging functions with the noreturn attribute.
If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE
and DO_CRASH are enabled then failed assertions never return. This can
resolve a large number of false positives with static analyzers.
ASTERISK-26220 #close
Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753
|
|
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
|
|
adsi.h is no longer used by features.c since parking was moved to a
module.
Change-Id: I2248b8a455225a17cb6ddaafd6c20c511a1eaf59
|
|
|
|
This commit adds scaffolding in order to support the SILK audio format
on calls. Roughly, this is what is added:
* Cached silk formats. One for each possible sample rate.
* ast_codec structures for each possible sample rate.
* RTP payload mappings for "SILK".
In addition, this change overhauls the res_format_attr_silk file in the
following ways:
* The "samplerate" attribute is scrapped. That's native to the format.
* There are far more checks to ensure that attributes have been
allocated before attempting to reference them.
* We do not SDP fmtp lines for attributes set to 0.
These changes make way to be able to install a codec_silk module and
have it actually work. It also should allow for passthrough silk calls
in Asterisk.
Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e
|
|
|
|
into 13
|
|
|
|
|
|
Create include_free to run ast_destroy_timing and ast_free, use that in
all places that freed an ast_include structure. This fixes a couple of
paths that previously did not run ast_destroy_timing.
ASTERISK-26196 #close
Change-Id: I1671bd111bef0dc113e8bf8f77f89fcfc395d838
|
|
into 13
|
|
If the destination format's name differed from the codec name then the
translator's explict_dst field would be improperly set. In some circumstances
it would end up setting it to a newly created format that has the same name
as the codec when it actually needed to be the given destination codec.
This could cause the translation path to use the wrong format. For instance,
if an endpoint had specified 'myulaw' as a format the translator could end up
using a 'ulaw' format (with whatever/default settings) instead. If the format
attribute settings differed between the two then there may unexpected results
during processing.
This patch removes the name check when building the translation path. This
should make it always set the translator's explicit_dst to the given destination
format as long as the sample rate and types match.
Change-Id: Iaf8a03831d68e657d89569d54b505074efbefab5
|
|
The roundtrip_usec json member is optional. If it isn't present then
don't put it into the converted json structure where ast_json_pack()
will choke on it.
Change-Id: I39bb2f86154ef54591270c58bfda8635070f9ea0
|
|
ast_threadpool_serializer_group leaks a reference to ser when listener
is allocated but tps is not. Although listener takes the reference to
ser cleanup functions are not run without tps.
ASTERISK-26191 #close
Change-Id: Ie3ccf69a3f1e676c2ef62a77067c0cb57dc9a585
|
|
Thanks to ibercom for pointing out a memory leak that was missed
in the earlier patch for the issue.
ASTERISK-26119
Reported by: Alexei Gradinari
Change-Id: I9a151f5c4725d97fb82a9e938bc73dc659532b71
|
|
Using AO2_CONTAINER_ALLOC_OPT_DUPS_REPLACE can result in an unref being
recorded to the refs log for the node being replaced. This prevents
logging of those unrefs since they would produce errors in
refcounter.py.
ASTERISK-26181 #close
Change-Id: Ie4fded84e8a1a58b3a59ce59dfd7eb0da3ddc5d4
|
|
When res_corosync detects that a node leaves or joins, it currently is
informed of this via Corosync callbacks. However, there are a few
limitations with the information presented:
(1) While we have information that Corosync is aware of - such as the
Corosync nodeid - that information is really only useful inside of
Corosync or res_corosync. There's no way to translate a Corosync
nodeid to some other internally useful unique identifier for the
Asterisk instance that just joined or left the cluster.
(2) While res_corosync is notified of the instance joining or leaving
the cluster, it has no mechanism to inform the Asterisk core or
other modules of this event. This limits the usefulness of res_corosync
as a heartbeat mechanism for other modules.
This patch addresses both issues.
First, it adds the notion of a cluster discovery message both within the
Stasis message bus, as well as the binary event messages that
res_corosync uses to transmit data back and forth within the cluster.
When Asterisk joins the cluster, it sends a discovery message to the other
nodes in the cluster, which correlates the Corosync nodeid along with
the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids
to Asterisk EIDs, such that it can map changes in cluster state with the
Asterisk instance that has that nodeid. Likewise, when an Asterisk
instance receives a discovery message from a node in the cluster, it now
sends its own discovery message back to the originating node with the
local Asterisk EID. This lets Asterisk instances within the cluster
build a complete picture of the other Asterisk instances within the
cluster.
Second, it publishes the discovery messages onto the Stasis message bus.
Said messages are published whenever a node joins or leaves the cluster.
Interested modules can subscribe for the ast_cluster_discovery_type()
message under the ast_system_topic() and be notified when changes in
cluster state occur.
Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465
|
|
Found as a result of the testsuite tests/callparking test crashing.
Several calls to ast_get_chan_featuremap_config() and
ast_get_chan_features_xfer_config() did not lock the channel before
calling so the channel's datastore list was accessed without the lock's
protection. Apparently another thread deleted a datastore on the
channel's list while the crashing thread was walking the list. Crash at
0xdeaddead due to MALLOC_DEBUG's memory filler value as a result.
* Add missing channel locks to calls that were not already protected
as the doxygen for those calls indicates.
Change-Id: Id273b3d305cc616406c353cbc841b2b7655efaa1
|
|
Adding format_name even to the end of ast_codec caused issued with
binary codec modules because the pointer would be garbage in asterisk
when they registered. So, the ast_codec structure was reverted and an
internal_ast_codec structure was created just for use in codec.c. A new
internal-only API was also added (__ast_codec_register_with_format) so
that codec_builtin could register codecs with the format_name in a
separate parameter rather than in the ast_codec structure.
ASTERISK-26144 #close
Reported-by: Alexei Gradinari
Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba
|
|
gcc 6.1.1 caught a few more issues.
Made sure the unit tests still pass for the func_env and stdtime
issues.
ASTERISK-26157 #close
Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e
|
|
|
|
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch updates Sorcery to use "yes" and
"no"
ASTERISK-26128 #close
Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec
|
|
|
|
ASTERISK-26119 #close
Change-Id: Iecbf7d0f360a021147344c4e83ab242fd1e7512c
|
|
The internal HTTP/WebSocket server supports both TCP and TLS, which can be
activated separately via the file http.conf. The source code intends to re-use
the TCP parameter 'bindaddr' for TLS, even if 'tlsbindaddr' is not specified
explicitly. This did not work because of a typo. This change resolves this typo.
ASTERISK-26126 #close
Change-Id: I5efb0409ae12044dfb3495b6b97b6d40a8c9c51f
|
|
With CLI "core show settings", simply the parameter maxfiles of the file
asterisk.conf was shown. If that parameter was not set, nothing was displayed
although the environment might have set a default number itself. Or if maxfiles
were not granted (completely), still maxfiles was shown. Now, the maximum number
of possible file descriptors in the environment is shown.
ASTERISK-26097
Change-Id: I2df5c58863b5007b34b77adbe28b885dfcdf7e0b
|
|
|
|
|
|
|
|
|
|
CEL wrongly assumed that a channel would only have a single dial
event on it. This is incorrect. Particularly in a queue each
call attempt to a member will result in a dial event, adding
a new dial status in CEL without removing the old one. This
would cause the container to grow with only one dial status
being removed when the channel went away. The other dial status
entries would remain leaking memory.
This change fixes the memory leak by ensuring that only one dial
status will only ever exist for each channel.
The behavior during the scenario where multiple events are received
has also been improved. For failure cases the first failure will
be the dial status. If an answer dial status is received, though,
it will take priority and the dial status for the channel will be
answer.
Memory usage has also been decreased by storing the minimal
amount of information and the code has been cleaned up slightly.
ASTERISK-25262 #close
Change-Id: I5944eb923db17b6a0faa7317ff6abc9307c009fe
|
|
descriptors." into 13
|
|
|
|
|
|
With menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", the maximum size of a
single file was shown. Now, the maximum number of possible file descriptors is
shown.
ASTERISK-26097
Change-Id: Icf98d145774b38cac144ca76d19eaef42ce659a3
|
