Age | Commit message (Collapse) | Author |
|
In this collection of small patches to prevent
Valgrind errors are: fixes for reference leaks
in config hooks, evaluating a parameter beyond
bounds, and accessing a structure after a lock
where it could have been already free'd.
Review: https://reviewboard.asterisk.org/r/4407/
........
Merged revisions 431583 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The act of defining wizards for an object type in sorcery.conf will
create a minimal object type. This can cause a problem when a module
has multiple sorcery instances (which all get the wizards from sorcery.conf
applied) but the sorcery instances do not all contain full information
about the object types. Upon loading errors will occur stating that
the objects can not be created. This is confusing and is actually
perfectly fine.
This change makes it so that only object types which have been fully
defined will be loaded.
ASTERISK-24748 #close
Reported by: Joshua Colp
........
Merged revisions 431538 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a new config property [servername] to the http.conf file; updated the http server to use the new property when sending responses, for showing http status through the CLI and when reporting status through the 'httpstatus' webpage. In this version, [servername] is uncommented by default.
ASTERISK-24316 #close
Reported By: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4374/
........
Merged revisions 431471 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These memory leaks were found and fixed by John Hardin. I'm just
committing them for him.
ASTERISK-24736 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4389
........
Merged revisions 431468 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When swapping a Local channel in place of one already
in a bridge (to complete a bridge attended transfer),
the channel that was swapped out can actually be hung
up before the stasis bridge push callback executes on
the independant transfer thread. This results in the
stasis app loop dropping out and removing the control
that has the the app name which the local replacement
channel needs so it can re-enter stasis.
To avoid this race condition a new push_peek callback
has been added, and called from the ast_bridge_impart
thread before it launches the independant thread that
will complete the transfer. Now the stasis push_peek
callback can copy the stasis app name before the swap
channel can hang up.
ASTERISK-24649
Review: https://reviewboard.asterisk.org/r/4382/
........
Merged revisions 431450 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Performing a CLI "module reload" command when there are new pjsip.conf
registration objects defined frequently failed to load them correctly.
What happens is a race condition between res_pjsip pushing its reload into
an asynchronous task processor task and the thread that does the rest of
the reloads when it gets to reloading the res_pjsip_outbound_registration
module. A similar race condition happens between a reload and the CLI/AMI
show registrations commands. The reload updates the current_states
container and the CLI/AMI commands call get_registrations() which builds a
new current_states container.
* Made res_pjsip.c reload_module() use ast_sip_push_task_synchronous()
instead of ast_sip_push_task() to eliminate two threads processing config
reloads at the same time.
* Made get_registrations() not replace the global current_states container
so the CLI/AMI show registrations command cannot interfere with reloading.
You could never add/remove objects in the container without the
possibility of the container being replaced out from under you by
get_registrations().
* Added a registration loaded sorcery instance observer to purge any dead
registration objects since get_registrations() cannot do this job anymore.
The struct ast_sorcery_instance_observer callbacks must be used because
the callback happens inline with the load process. The struct
ast_sorcery_observer callbacks are pushed to a different thread.
* Added some global current_states NULL pointer checks in case the
container disappears because of unload_module().
* Made sorcery's struct ast_sorcery_instance_observer.object_type_loaded
callbacks guaranteed to be called before any struct
ast_sorcery_observer.loaded callbacks will be called.
* Moved the check for non-reloadable objects to before the sorcery
instance loading callbacks happen to short circuit unnecessary work.
Previously with non-reloadable objects, the sorcery instance
loading/loaded callbacks would always happen, the individual wizard
loading/loaded would be prevented, and the non-reloadable type logging
message would be logged for each associated wizard.
ASTERISK-24729 #close
Review: https://reviewboard.asterisk.org/r/4381/
........
Merged revisions 431243 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431251 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
While running through some scenarios using chan_sip and tcp a problem would
occur that resulted in a flood of bad file descriptor messages on the cli:
tcptls.c:712 ast_tcptls_server_root: Accept failed: Bad file descriptor
The message is received because the underlying socket has been closed, so is
valid. This is probably happening because unloading of chan_sip is not atomic.
That however is outside the scope of this patch. This patch simply stops the
logging of multiple occurrences of that message.
ASTERISK-24728 #close
Reported by: Thomas Thompson
Review: https://reviewboard.asterisk.org/r/4380/
........
Merged revisions 431218 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 431219 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, ModuleLoad would respond with an error indicating that
the requested module wasn't found in spite of finding and reloading the
module.
Review: https://reviewboard.asterisk.org/r/4373/
ASTERISK-24721 #close
........
Merged revisions 431153 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions it was removed until the
problem could be resolved. This patch is the original patch plus some added
locking around stasis router subcription that was needed to avoid the memory
corruption.
Description of the original problem and patch (still applicable):
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4363/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 431179 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
direct media.
This change fixes two issues:
1. During a swap operation bridging added the new channel before having the swap channel
leave. This was not handled in bridge_native_rtp and could result in a channel not getting
reinvited back to Asterisk. After this change the swap channel will leave first and the
new channel will then join.
2. If a re-invite was received after a session had been established any upstream elements
(such as bridge_native_rtp) were not notified that they may want to re-evaluate things.
After this change an UPDATE_RTP_PEER control frame is queued when this situation occurs
and upstream can react.
AST-1524 #close
Review: https://reviewboard.asterisk.org/r/4378/
........
Merged revisions 431157 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses compilation errors on OS X. It's been a while, so
there's quite a few things.
* Fixed __attribute__ decls in route.h to be portable.
* Fixed htonll and ntohll to work when they are defined as macros.
* Replaced sem_t usage with our ast_sem wrapper.
* Added ast_sem_timedwait to our ast_sem wrapper.
* Fixed some GCC 4.9 warnings using sig*set() functions.
* Fixed some format strings for portability.
* Fixed compilation issues with res_timing_kqueue (although tests still fail
on OS X).
* Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue
on OS X).
ASTERISK-24539 #close
Reported by: George Joseph
ASTERISK-24544 #close
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/4327/
........
Merged revisions 431092 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a crash was fixed due to usage of the REALTIME function in r423003, a
regression was introduced into ast_update2_realtime where the update fields
passed to the function would be skipped and the lookup field processed twice.
The use of this function is a bit interesting: A variable argument list is
used with two sentinel values - the first marks the end of the lookup
fields/values; the second marks the end of the update fields/values.
Unfortunately, ast_update2_realtime parses over the lookup fields twice, as
opposed to parsing over the update fields. This causes the lookups to succeed,
but the updates itself to have no effect.
Note that the most common instance of this problem occurred in app_voicemail
during the updating of a mailbox password.
Thanks to the issue reporter, Paddy Grice, for pointing out the problem.
Review: https://reviewboard.asterisk.org/r/4356/
ASTERISK-24231
ASTERISK-24626 #close
Reported by: Paddy Grice
........
Merged revisions 431072 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431073 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 430996 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430998 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When code imparts a channel into a bridge to swap with another channel, a
ref needs to be held on the swap channel to ensure that it cannot
dissapear before finding it in the bridge.
* The ast_bridge_join() swap channel parameter now always steals a ref for
the swap channel. This is the only change to the bridge framework's
public API semantics.
* bridge_channel_internal_join() now requires the bridge_channel->swap
channel to pass in a ref.
ASTERISK-24649
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4354/
........
Merged revisions 430975 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When the RTCP reports are created, the NTP timestamps are stored as strings,
as JSON does not have an integer type long enough to store the value. However,
on 32-bit systems, a signed long may overflow for some portion of the
timestamp.
This patch corrects the overflow by formatting the timestamps as unsigned
longs.
........
Merged revisions 430840 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a hint gets created, any subsequent device or presence
state changes result in extension status events getting sent
out to interested parties. However, at the time of hint creation,
no such event gets sent out, so watchers of extension state are
potentially left in the dark until the first state change after
hint creation.
Patch contributed by John Hardin (License #6512)
........
Merged revisions 430776 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions the patch is
being removed until the problem can be resolved.
........
Merged revisions 430734 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4311/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 430628 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Reverted the change to astman_send_listack() to not use the listflag
parameter and always set the value to "Start" so the start capitalization
is consistent. Unfortunately changing the case of a returned value is not
a backward compatible change so for now FAXSessions is going to have to
remain inconsistent with all of the other AMI list actions.
* Reverted the minor protocol error fix in action_getconfig() when no
requested categories are found. Each line needs to be formatted as
"Header: text".
Caught by the testsuite.
ASTERISK-24049
........
Merged revisions 430528 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
instead.
ASTERISK-24049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The security event log uses a dynamic log level (SECURITY) that is registered
with the Asterisk logging core. Unfortunately, the syslog would ignore log
statements that had a dynamic log level associated with them. Because the
syslog cannot handle ad hoc dynamic log levels, this patch treats any dynamic
log entries sent to the syslog as logs with a level of NOTICE.
ASTERISK-20744 #close
Reported by: Michael Keuter
Tested by: Michael L. Young, Jacek Konieczny
patches:
asterisk-20744-syslog-dynamic-logging_trunk.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 430506 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430507 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When app_bridge grabs a channel and puts it into
a bridge, the channel should then continue where
it left off in the dialplan after the bridge has
ended. Although it stores the current dialplan
location as an after bridge goto on the channel,
it was executing the same priority again instead
of going to the next priority. By swapping the
"specific" version of bridge_set_after_goto with
bridge_set_after_go_on, the next priority in the
dialplan is executed instead.
ASTERISK-24637 #close
Review: https://reviewboard.asterisk.org/r/4322/
Reported by: John Bigelow
........
Merged revisions 430467 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Follow-up issue to -r430435 from reviewboard review.
ASTERISK-24049
Review: https://reviewboard.asterisk.org/r/4315/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Let's say you have a template T with variable VAR1 = ON and you have a
context C(T) that doesn't specify VAR1. If you read C, the effective value
of VAR1 is ON. Now you change T VAR1 to OFF and call
ast_config_text_file_save. The current behavior is that the file gets
re-written with T/VAR1=OFF but C/VAR1=ON is added. Personally, I think this
is a bug. It's preserving the effective state of C even though I didn't
specify C/VAR1 in th first place. I believe the behavior should be that if
I didn't specify C/VAR1 originally, then the effective value of C/VAR1 should
continue to follow the inherited state. Now, if I DID explicitly specify
C/VAR1, the it should be preserved even if the template changes.
Even though I think the existing behavior is a bug, it's been that way forever
so I'm not changing it. Instead, I've created ast_config_text_file_save2()
that takes a bitmask of flags, one of which is to preserve the effective context
(the current behavior). The original ast_config_text_file_save calls *2 with
the preserve flag. If you want the new behavior, call *2 directly without a
flag.
I've also updated Manager UpdateConfig with a new parameter
'PreserveEffectiveContext' whose default is 'yes'. If you want the new behavior
with UpdateConfig, set 'PreserveEffectiveContext: no'.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4297/
........
Merged revisions 430295 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 430274 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A blond transfer to a failed destination, when followed
by a recall attempt, lead to a leak of the reference to
the destination channel. In addition to correcting the
regression on the previous attempt (r429826) this fixes
the leak and two additional reference leaks on failures
of bridge_import.
ASTERISK-24513 #close
Review: https://reviewboard.asterisk.org/r/4302/
........
Merged revisions 430199 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 430200 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In r428708 additional codecs were added including
a payload type of 128 which is outside of nominal
range of 0-127. This change moves changes 128 to
96 to avoid causing a pjsip assertion when making
a call to an endpoint configured with allow=all.
ASTERISK-24367 #close
Review: https://reviewboard.asterisk.org/r/4286/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
We only need to hold the context_merge_lock once. Locking it twice will make
many other parts of Asterisk very sad.
ASTERISK-24641 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
After the initial DTMF atxfer call attempt to the transfer target fails to
answer during a blonde transfer, the recall callback channels do not get
setup with information from the initial transferrer channel. As a result,
the recall callback to the transferrer does not have callid, channel
variables, datastores, accountcode, peeraccount, COLP, and CLID setup. A
similar situation happens with the recall callback to the transfer target
but it is less visible. The recall callback to the transfer target does
not have callid, channel variables, datastores, accountcode, peeraccount,
and COLP setup.
* Added missing information to the recall callback channels before
initiating the call. callid, channel variables, datastores, accountcode,
peeraccount, COLP, and CLID
* Set callid of the transferrer channel on the DTMF atxfer controller
thread attended_transfer_monitor_thread().
* Added missing channel unlocks and props unref to off nominal paths in
attended_transfer_properties_alloc().
ASTERISK-23841 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4259/
........
Merged revisions 430034 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430041 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The QUEUESTART log entry has historically acted like a fully booted event
for the queue_log file. When the QUEUESTART entry was posted to the log
was broken by the change made by ASTERISK-15863.
* Made post the QUEUESTART queue_log entry when Asterisk fully boots.
This restores the intent of that log entry and happens after realtime has
had a chance to load.
AST-1444 #close
Reported by: Denis Martinez
Review: https://reviewboard.asterisk.org/r/4282/
........
Merged revisions 430009 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430010 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds the ability for channel drivers to supply presence information
in a similar manner to device state. The patch does not provide any channel
driver implementations, but it does provide the core infrastructure necessary
for channel drivers to provide such information.
The core handles multiple providers of presence state information. Ordering
of presence state is as follows:
INVALID < NOT_SET < AVAILABLE < UNAVAILABLE < CHAT < AWAY < XA < DND
Each provider can trump the previous if it provides a presence state that
supercedes a previous one.
Review: https://reviewboard.asterisk.org/r/4050
ASTERISK-24363 #close
Reported by: Gareth Palmer
patches:
chan_presencestate-428146.patch uploaded by Gareth Palmer (License 5169)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
startup.
The named ACL code incorrectly destroyed the config options information if loading
of the configuration file failed at startup. This would result in reloading
also failing even if a valid configuration file was put in place.
ASTERISK-23733 #close
Reported by: Richard Kenner
........
Merged revisions 429893 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429894 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
After a blond transfer (start attended and hang up)
to a destination that also hangs up without answer,
the Local;1 channel was leaked and would show up on
core show channels. This was happening because the
attended state blond_nonfinal_enter() resetting the
props->transfer_target to null while releasing it's
own reference, which would later prevent props from
releasing another reference during destruction. The
change made here is simply to not assign the target
to NULL.
ASTERISK-24513 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4262/
........
Merged revisions 429826 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429827 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The AST_FLAG_BRIDGE_DUAL_REDIRECT_WAIT flag was created to prevent bridges from
prematurely acting on orphaned channels in bridges. The problem with the AMI
redirect action was that it was setting this flag on channels based on the presence
of a PBX, not whether the channel was in a bridge. Whether a channel has a PBX
is irrelevant, so the condition has been altered to check if the channel is in a
bridge.
ASTERISK-24536 #close
Reported by Niklas Larsson
Review: https://reviewboard.asterisk.org/r/4268
........
Merged revisions 429741 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
No functionality change. Just move the definition of ast_module_reload
from _private.h to module.h so it can be public.
Also removed the include of _private.h from manager.c since ast_module_load
was the only reason for including it.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4251/
........
Merged revisions 429542 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch started with David Lee's patch at
https://reviewboard.asterisk.org/r/2826/ and includes a regression fix
introduced by the ASTERISK-22455 patch.
The initialization of a mutex's lock tracking structure was not protected
in a critical section. This is fine for any mutex that is explicitly
initialized, but a static mutex may have its lock tracking double
initialized if multiple threads attempt the first lock simultaneously.
* Added a global mutex to properly serialize initialization of the lock
tracking structure. The painful global lock can be mitigated by adding a
double checked lock flag as discussed on the original review request.
* Defer lock tracking initialization until first use.
* Don't be "helpful" and initialize an uninitialized lock when
DEBUG_THREADS is enabled. Debug code is not supposed to fix or change
normal code behavior. We don't need a lock initialization race that would
force a re-setup of lock tracking. Lock tracking already handles
initialization on first use.
* Properly handle allocation failures of the lock tracking structure.
* No need to initialize tracking data in __ast_pthread_mutex_destroy()
just to turn around and destroy it.
The regression introduced by ASTERISK-22455 is the result of manipulating
a pthread_mutex_t struct outside of the pthread library code. The
pthread_mutex_t struct seems to have a global linked list pointer member
that can get changed by other threads. Therefore, saving and restoring
the contents of a pthread_mutex_t struct is a bad thing.
Thanks to Thomas Airmont for finding this obscure regression.
* Don't overwrite the struct ast_lock_track.reentr_mutex member to restore
tracking data in __ast_cond_wait() and __ast_cond_timedwait(). The
pthread_mutex_t struct must be treated as a read-only opaque variable.
Miscellaneous other items fixed by this patch:
* Match ast_suspend_lock_info() with ast_restore_lock_info() in
__ast_cond_timedwait().
* Made some uninitialized lock sanity checks return EINVAL and try a
DO_THREAD_CRASH.
* Fix bad canlog initialization expressions.
ASTERISK-24614 #close
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/4247/
Review: https://reviewboard.asterisk.org/r/2826/
........
Merged revisions 429539 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When shutting down Asterisk the codecs are cleaned up. As a result anything
attempting to get a codec based on ID or details will find that no codec
exists. This currently occurs when determining the sample count of a frame.
This code did not take this situation into account.
This change fixes this by getting the codec directly from the format and
eliminates the lookup. This is both faster and also provides a guarantee
that the codec will exist and will be valid.
ASTERISK-24604 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4260/
........
Merged revisions 429497 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When connecting to the remote console, an id string
is first provided that consts of the hostname, pid,
and version. This is parsed by the remote instance
using a buffer that may be too short, and can allow
a buffer overrun because it is not terminated. This
patch adds termination and a larger buffer.
Review: https://reviewboard.asterisk.org/r/4182/
........
Merged revisions 429223 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The channel "language" was already part of a channel snapshot, however is was
not sent out over AMI or ARI. This patch makes it so the channel "language" is
included in the appropriate AMI or ARI events.
ASTERISK-24553 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4245/
........
Merged revisions 429204 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429206 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429209 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When endpoints with direct_media enabled, behind a firewall (Asterisk on a
separate network) and were bridged sometimes Asterisk would send the ip
address of the firewall in the sdp to one of the phones in the reinvite
resulting in one way audio. When sending the reinvite Asterisk will retrieve
the media address from the associated rtp instance, but if frames were being
read this can be overwritten with another address (in this case the
firewall's). This patch ensures that Asterisk uses the original device
address when using direct media.
ASTERISK-24563
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4216/
........
Merged revisions 429195 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429196 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The AMI event is called NewConnectedLine and the ARI event is called
ChannelConnectedLine.
ASTERISK-24554 #close
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/4231
........
Merged revisions 429064 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This corrects several bugs that currently exist in the stasis
application code.
* After a masquerade, the resulting channels have channel topics that
do not match their uniqueids
** Masquerades now swap channel topics appropriately
* StasisStart and StasisEnd messages are leaked to observer
applications due to being published on channel topics
** StasisStart and StasisEnd publishing is now properly restricted
to controlling apps via app topics
* Race conditions exist where StasisStart and StasisEnd messages due to
a masquerade may be received out of order due to being published on
different topics
** These messages are now published directly on the app topic so this
is now a non-issue
* StasisEnds are sometimes missing when sent due to masquerades and
bridge swaps into and out of Stasis()
** This was due to StasisEnd processing adjusting message-sent flags
after Stasis() had already exited and Stasis() had been re-entered
** This was corrected by adjusting these flags prior to sending the
message while the initial Stasis() application was still shutting
down
Review: https://reviewboard.asterisk.org/r/4213/
ASTERISK-24537 #close
Reported by: Matt DiMeo
........
Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429062 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add new global, instance and wizard observers.
instance_created
wizard_registered
wizard_unregistered
instance_destroying
instance_loading
instance_loaded
wizard_mapped
object_type_registered
object_type_loading
object_type_loaded
wizard_loading
wizard_loaded
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4215/
........
Merged revisions 428999 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429000 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
On a 32-bit system, a type of intmax_t will result in a compilation warning
when formatted as a 'long int'. Use the format specifier of %jd (which was
what was used originally in manager.c) to format the JSON extracted integer
on both 32-/64-bit systems.
........
Merged revisions 428972 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428973 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch fixes a race condition between the raising of test AMI events (which
drive many tests in the Asterisk Test Suite) and other AMI events. Prior to
this patch, the Stasis messages published to the test topic were not forwarded
to the AMI topic. Instead, the code in manager had a dedicated handler for test
messages that was independent of the topics forwarded to the AMI topic. This
results in no synchronization between the test messages and the rest of the
Stasis messages published out over AMI. In some test with very tight timing
constraints, this can result in out of order messages and spurious test
failures. Properly forwarding the Test Suite topic to the AMI topic ensures
that the messages are synchronized properly.
This patch does that, and moves the message handling to the Stasis definition
of the Test Suite message in test.c as well.
Review: https://reviewboard.asterisk.org/r/4221/
........
Merged revisions 428945 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428946 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add
const char *ast_variable_find_in_list(const struct ast_variable *list,
const char *variable);
ast_variable_find() requires a config category to search whereas
ast_variable_find_in_list() just needs the root list element which is
useful if you don't have a category.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4217/
........
Merged revisions 428733 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428734 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
32kHz, 44kHz, 48kHz, 96kHz, and 192kHz over RTP.
This change adds mappings in the RTP engine layer for the remaining signed linear formats.
ASTERISK-24274 #close
Reported by: Frankie Chin
Review: https://reviewboard.asterisk.org/r/4093/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|