| Age | Commit message (Collapse) | Author |
|---|
|
We have a strange relationship between the parsing of format
capabilities from a string and their representation as a string. We
expect the format capabilities to be expressed as a string in the
following format:
allow = !all,ulaw,alaw
disallow = g722
While we would generate the string representation of those formats as:
allow = (ulaw|alaw)
disallow = (ulaw|alaw|g729...)
When the configuration framework needs to store values as a string, it
generates the format capabilities using the second representation; this
representation however cannot be parsed when the entry is rehydrated.
This patch fixes that by updating
ast_format_cap_update_by_allow_disallow to parse an entry as if it were
in the generated format if it has a leading '(' and a trailing ')'.
ASTERISK-25238
Change-Id: I904d43caf4cf45af06f6aee0c9e58556eb91d6ca
|
|
If a sorcery wizard does not support one of the 'optional' CRUD
operations (namely the CUD), log a WARNING message so we are aware of
why the operation failed. This also removes an assert in this case, as
the CUD operation may have been triggered by an external system, in
which case it is not a programming error but a configuration error.
Change-Id: Ifecd9df946d9deaa86235257b49c6e5e24423b53
|
|
providers"
|
|
|
|
|
|
Currently, the device state provider API will allow you to register a
device state provider with the same case insensitive name more than
once. This could cause strange issues, as the duplicate device state
providers will not be queried when a device's state has to be polled.
This patch updates the API such that a device state provider with the
same name as one that has already registered will be rejected.
Change-Id: I4a418a12280b7b6e4960bd44f302e27cd036ceb2
|
|
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
|
|
|
|
Prior to this patch, the DNS core present in master had no default system-level
resolver implementation. Therefore, it was not possible for the DNS core to
perform resolutions unless the libunbound library was installed and the
res_resolver_unbound module was loaded.
This patch introduces a system-level DNS resolver implementation that will
register itself with the lowest consideration priority available (to ensure
that it is to be used only as a last resort). The resolver relies on low-level
DNS search functions to perform a rudimentary DNS search based on a provided
query and then supplies the search results to the DNS core.
ASTERISK-25146 #close
Reported By: Joshua Colp
Change-Id: I3b36ea17b889a98df4f8d80d50bb7ee175afa077
|
|
This patch enhances the bucket API in two ways.
First, since ast_bucket and ast_bucket_file instances are immutable, a 'clone'
operation has been added that provides a 'clone' of an existing
ast_bucket/ast_bucket_file object. Note that this makes use of the
ast_sorcery_copy operation, along with the copy callback handler on the
"bucket" and "file" object types for the bucket sorcery instance.
Second, there is a need for the bucket API to ask a wizard if an object
is stale. This is particularly useful with the upcoming media cache
enhancements, where we want to ask the backing data storage if the
object we are currently operating on has known updates. This patch adds
API calls for ast_bucket and ast_bucket_file objects, which callback
into their respective sorcery wizards via the sorcery API.
Unit tests have also been added to cover the respective
ast_bucket/ast_bucket_file clone and staleness operations.
Change-Id: Ib0240ba915ece313f1678a085a716021d75d6b4a
|
|
This patch enhances the sorcery API to allow for sorcery wizards to
determine if an object is stale. This includes the following:
* Sorcery objects now have a timestamp that is set on creation. Since
sorcery objects are immutable, this can be used by sorcery wizards to
determine if an object is stale.
* A new API call has been added, ast_sorcery_is_stale. This API call
queries the wizards associated with the object, calling a new callback
function 'is_stale'. Note that if a wizard does not support the new
callback, objects are always assumed to not be stale.
* Unit tests have been added that cover the new API call.
Change-Id: Ica93c6a4e8a06c0376ea43e00cf702920b806064
|
|
|
|
configs"
|
|
ast_rtp_engine_unload_format."
|
|
|
|
When a mapping does not exist between a sorcery.conf defined object and
a realtime mapping in extconf, currently, the user will receive a slew
of ERROR messages that don't really tell what is happening. Some ERROR
messages may even be misleading, as they occur after the sorcery API has
already given up on the attempt to load and create the sorcery object.
This patch adds a bit of debug and a useful WARNING message for when a
wizard's open callback fails for a particular object type. In the bad
configurations that resulted in this patch, this provided a 'root cause'
WARNING message that pointed in the right direction of the configuration
problem.
Change-Id: I1cc7344f2b015b8b9c85a7e6ebc8cb4753a8f80b
|
|
The recurring unit test expects the user data on a DNS query
created as a result of a recurring DNS query to be the recurring
structure itself. This is true, mostly. When invoking the user
provided callback this user data is changed to the user provided
data. This presents a race condition where the data may or may
not point to the recurring data.
This change simplifies the callback of the user provided callback
by creating a new query and populating it with the expected values.
This leaves the recurring DNS query alone and fixes the race
condition. This is more in line with how the API should be used
overall.
ASTERISK-25222 #close
Change-Id: I10fb6deec025dff097157e7ec17e6e4921778478
|
|
When running valgrind on Asterisk, it complained about:
==32423== Source and destination overlap in memcpy(0x85a920, 0x85a920, 304)
==32423== at 0x4C2F71C: memcpy@@GLIBC_2.14 (in /usr/lib/valgrind/...)
==32423== by 0x55BA91: ast_rtp_engine_unload_format (rtp_engine.c:2292)
==32423== by 0x4EEFB7: ast_format_attr_unreg_interface (format.c:1437)
The code in question is a struct assignment, which may be performed by
memcpy as a compiler optimization. It is changed to only copy the struct
contents if source and destination are different.
ASTERISK-25219 #close
Change-Id: I6d3546c326b03378ca8e9b8cefd41c16e0088b9a
|
|
If DEBUG_FD_LEAKS was used and more file descriptors than the default of
1024 were available, some DEBUG_FD_LEAKS-patched functions would
overwrite memory past the fixed-size (1024) fdleaks buffer.
This change:
- adds bounds checks to __ast_fdleak_fopen and __ast_fdleak_pipe
- consistently uses ARRAY_LEN() instead of sizeof() or 1023 or 1024
- stores pointers to constants instead of copying the contents
- reorders the fdleaks struct for possibly tighter packing
- adds a tiny bit of documentation
ASTERISK-25212 #close
Change-Id: Iacb69e7701c0f0a113786bd946cea5b6335a85e5
|
|
When a frame is queued on a channel, any failure in
ast_channel_alert_write is logged along with errno.
This change improves the diagnostic message through
aligning the errno value with actual failure cases.
ASTERISK-25224
Reported by: Andrey Biglari
Change-Id: I1bf7b3337ad392789a9f02c650589cd065d20b5b
|
|
|
|
When 8297136f was merged for ASTERISK-25040, a regression was introduced
surrounding the case sensitivity of device names within hints.
Previously, device names - such as 'sip/foo' - were compared in a case
insensitive fashion. Thus, 'sip/foo' was equivalent to 'SIP/foo'. After
that patch, only the case sensitive name would match, i.e., 'SIP/foo'.
As a result, some dialplan hints stopped working.
This patch re-introduces case insensitive matching for device names in
hints.
ASTERISK-25040
ASTERISK-25202 #close
Change-Id: If5046a7d14097e1e3c12b63092b9584bb1e9cb4c
(cherry picked from commit 96bbcf495a1da9e607d9b04a44b5c4f49e83cc03)
|
|
|
|
|
|
ASTERISK-25189 #close
Reported by: John Hardin
Change-Id: I2b1778c3fdc1dca0ed55db4e3a639eddfb16c2ac
|
|
A module trying to unload needs to wait for all serializers it creates and
uses to complete processing before unloading.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059
|
|
Find and unlink the specified sorcery object type to complement
ast_sorcery_object_register(). Without this function you cannot
completely unload individual modules that use sorcery for configuration.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I1c04634fe9a90921bf676725c7d6bb2aeaab1c88
|
|
Due to the way that channels can now be moved around inside of
Asterisk it is possible for the outgoing flag of a channel to get
cleared before it has been answered. This results in the bridge
not receiving notification that the outgoing leg has been answered.
This most easily exhibits itself with DTMF based blond transfers.
Since the answer of the outgoing leg is ignored the other party
continues to receive both a locally generated ringing and the
media stream of the outgoing leg upon its answer. This results
in no media being heard.
This change removes the ignore of the answer and allows it
to pass through.
ASTERISK-25171 #close
Change-Id: I82aedcec4f89f34a2e5472086dfc9a6c775bca8e
|
|
Added checks when a unit test is registered to see that the summary and
description strings do not end with a new-line '\n' for consistency.
The check generates a warning message and will cause the
/main/test/registrations unit test to fail.
* Updated struct ast_test_info member doxygen comments.
Change-Id: I295909b6bc013ed9b6882e85c05287082497534d
|
|
After completing an attended transfer the transfer target channel was not being
hung up after leaving the bridge. Added an explicit softhangup to hangup said
channel, but only if it was previously bridged.
ASTERISK-24782 #close
Reported by: John Bigelow
Change-Id: Idde9543d56842369384a5e8c00d72a22bbc39ada
|
|
The CDR_PROP function (as well as the NoCDR application) set the
'disable all' flag (AST_CDR_FLAG_DISABLE_ALL) on the current CDR. This
flag is supposed to be applied to all CDRs that are currently in the
chain, as well as all CDRs that may be created in the future. Currently,
however, the flag is only applied to the existing CDRs in the chain; new
CDRs do not receive the 'disable all' flag. In particular, this affects
parallel dials, which generate new CDRs for each pair of channels in
the dial attempt.
This patch carries over the 'disable all' flag when it is specified on a
CDR and a new CDR is generated for the chain.
ASTERISK-24344 #close
Change-Id: I91a0f0031e4d147bdf8a68ecd08304d506fb6a0e
|
|
When a parallel dial occurs, a new CDR will be created for each dial
attempt that is made. In most circumstances, the act of creating each
CDR in the chain will include a step that updates the Party A snapshot,
which causes the context/extension of the Party A to be copied onto the
CDR object.
However, when the Party A is in a subroutine, we explicitly do *not*
copy the context/extension onto the CDR. This prevents the Macro or
GoSub routine name from blowing away the context/extension that the
channel was originally executing in. For the original CDR, this is not a
problem: the original CDR already recorded the last known 'good' state
of the channel just prior to it going into the subroutine. However, for
newly generated CDRs in a chain, there is no context/extension set on
them. Since we are in a subroutine, we will never set the Party A's
context/extension on the CDR, and we end up with a CDR with no
destination recorded on it.
This patch updates the creation of a chained CDR such that it copies
over the original CDR's context/extension. This is the last known "good"
state of the CDR, and is a reasonable starting point for the newly
generated CDR. In the case where we are not in a subroutine, subsequent
code will update the location of the CDR from the Party A information;
in the case where we are in a subroutine, the context/extension on the
original CDR is the correct information.
ASTERISK-24443 #close
Change-Id: I6a3ef0d6e458d3b9b30572feaec70f2964f3bc2a
|
|
information."
|
|
When performing a blonde transfer the code uses the old masquerade
mechanism to move a channel around. As a result of this certain information,
such as connected line, is moved between the channels involved. Upon
completion of the move a frame is queued which is supposed to update the
connected line information on the channel. This does not occur as the
code considers it a redundant update since the masquerade operation
updated the channel (but did not inform it of the new connected line
information). The code also does not queue a connected line update
to be handled by the thread handling the channel. Without this any
other channel that may be loosely involved does not know it is
talking to a different caller.
This change does the following to resolve this:
1. The indicated connected line information is cleared upon
completion of the masquerade operation when doing a blonde transfer.
This prevents the connected line update from being considered
redundant.
2. A connected line update frame is now queued upon the completion
of the masquerade operation so any other channel loosely involved
knows that there is a different caller.
ASTERISK-25157 #close
Reported by: Joshua Colp
Change-Id: Ibb8798184a1dab3ecd35299faecc420034adbf20
|
|
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject when using an external DNS resolver to process messages for the
transaction.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_resolver.c use the requesting thread's serializer to execute
the async callback.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
ASTERISK-25115 #close
Reported by: John Bigelow
Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
|
|
* Fix query_set destruction before we are done kicking the queries off.
* Fixed no queries requested handling.
* Add empty queries request unit test.
* Added missing allocation check in ast_dns_query_set_add().
* Made initial pjsip resolving query vector slightly larger.
ASTERISK-25115
Reported by: John Bigelow
Change-Id: Ie8be8347d0992e93946d72b6e7b1299727b038f2
|
|
Change-Id: Icafea3fb4ea64ac027561b23cbfe2b17997dc549
|
|
Change-Id: Iee3bd8c8a528776056972066698fe735f0f6cf60
|
|
|
|
|
|
Although ast_context_find, ast_context_find_or_create and
ast_context_destroy perform locking of the contexts table,
any context pointer can become invalid at any time that the
contexts table is unlocked. This change adds locking around
all complete operations involving these functions.
Places where ast_context_find was followed by ast_context_destroy
have been replaced with calls ast_context_destroy_by_name.
ASTERISK-25094 #close
Reported by: Corey Farrell
Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa
|
|
So this issue is a bit complicated. Since it is possible to pass values to AMI
that contain a '\r\n' (or other similar sequences) these values need to be
escaped. One way to solve this is to escape the values and then pass the escaped
values to the AMI variable parameter string building function. However, this
puts the onus on the pre-build function to escape all string values. This
potentially requires a fair amount of changes along with a lot of string
allocations/freeing for all values.
Surely there is a way to push this complexity down a level into the string
building function itself? This of course is possible, but ends up requiring a
way to distinguish between strings that need to be escaped and those that don't.
The best way to handle this is by introducing a new format specifier in the
format string. For instance a %s (no escape) and %S (escape). However, that is
a bit weird and unexpected.
So faced with those possibilities this patch implements a limited version of the
first option. Instead of attempting to escape all string values this patch only
escapes those values that make sense. This approach limits the number of changes
and doesn't suffer from the odd format specifier problem.
ASTERISK-24934 #close
Reported by: warren smith
Change-Id: Ib55a5b84fe0481b0f2caaaab68c566f392c0aac0
|
|
* Add some type casting so tv_usec can really be a long, instead of
some strange platform specific type.
* Add some .dylib style files to .gitignore.
* Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
versions of GCC, when compiling the Homebrew formula for Asterisk,
are not properly passing the -Xlinker options to the linker. Given
that -Wl, does exactly the [same thing][], and does it properly, this
patch changes the -Xlinker options to use -Wl, instead.
[reasons unknown]: http://bit.ly/1SUbEYx
[same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html
Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd
|
|
Show uptime information ends with an unnecessary space.
Now NEEDCOMMA is better defined.
Change-Id: I11b360504a0703309ff51772ff8f672287f3c5a1
|
|
Change-Id: I68a85a7fcbdb282140ff333c6274b6763d5f82a3
|
|
This reverts commit 6fca75bb628dfff2ab112e80b0228cf3ac0b8a05.
Change-Id: Ifee026cc63e22c5ac5717c37867a9f036373ae5a
|
|
When an endpoint was created, it's messages were being forwarded to
both the tech endpoint topic and the all endpoints topic. Since
the tech topic was also forwarded to all, this was resulting in
duplicate messages whenever an endpoint published. This patch
causes the endpoint to only forward to the tech topic and lets
the tech topic forward to all.
To accomplish this, the existing stasis_cp_single_create function
(which both creates and forwards) was cloned and split into 2
functions, one that creates the topic and one that sets up the
forwarding. This allows endpoint_internal_create to create
the topic from the endpoint_all cache without forwarding it there,
then allows it to do the forward to the tech's topic.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I26d7d4926a0861748fd3bdffe316b75b549a801c
|
|
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
|
|
The cache creation callback function expects to receive a sorcery_details
structure and not just a standalone object.
Change-Id: I3e4a5a137cb25292eb52d7a14cbb6daa09213450
|
