Age | Commit message (Collapse) | Author |
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144066 | murf | 2008-09-23 10:41:49 -0600 (Tue, 23 Sep 2008) | 29 lines
(closes issue #13489)
Reported by: DougUDI
Tested by: murf
(closes issue #13490)
Reported by: seanbright
Tested by: murf
(closes issue #13467)
Reported by: edantie
Tested by: murf, edantie, DougUDI
This crash happens because we are unsafely handling old pointers.
The channel whose cdr is being handled, has been hung up and
destroyed already. I reorganized the code a bit, and tried not
to lose the fork-cdr-chain concepts of the previous code.
I now verify that the 'previous' channel (the channel we
had when the bridge was started), still exists, by looking it up
by name in the channel list. I also do not try to reset the
CDR's of channels involved in bridges.
Testing shows it solves the crash problem, and should not
negatively impact previous fixes involving CDR's generated
during/after blind transfers. (The reason we need to reset
the CDR's on the "beginning" channels in the first place).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
is set, don't bother searching for a region to free, just
immediately exit.
This has the dual benefit of suppressing a warning message
about freeing memory at (nil) and of optimizing the free()
replacement by not having to do any futile searching for
the proper region to free.
(closes issue #13498)
Reported by: pj
Patches:
13498.patch uploaded by putnopvut (license 60)
Tested by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@143400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r143337 | mmichelson | 2008-09-17 13:24:15 -0500 (Wed, 17 Sep 2008) | 6 lines
Allow for "G.729" if offered in an SDP even though
it is not RFC 3551 compliant. Some Cisco switches
will send this in an SDP, and it doesn't hurt to
be able to accept this.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@143340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(Closes issue #13470)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142740 | tilghman | 2008-09-12 11:27:32 -0500 (Fri, 12 Sep 2008) | 4 lines
Don't return a free'd pointer, when a file cannot be opened.
(closes issue #13462)
Reported by: wackysalut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142741 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142474 | murf | 2008-09-10 15:58:17 -0600 (Wed, 10 Sep 2008) | 30 lines
(closes issue #12318)
Reported by: krtorio
I made a small change to the code that handles local channel situations.
In that code, I copy the answer time from the peer cdr, to the bridge_cdr,
but I wasn't also copying the disposition from the peer cdr.
So, Now I copy the disposition, and I've tested against
these cases:
1. phone 1 never answers the phone; no cdr is generated at all.
this should show up as a manager command failure or something.
2. phone 2 never answers. CDR is generated, says NO ANSWER
3. phone 2 is busy. CDR is generated, says BUSY
4. phone 2 answers: CDR is generated, times are correct; disposition
is ANSWERED, which is correct. The start time is the time that
the manager dialed the first phone. The answer time is the time
the second phone picks up.
I purposely left the cid and src fields blank; since this call really
originates from the manager, there is no 'easy' data to put in these
fields. If you feel strongly that these fields should be filled in,
re-open this bug and I'll dig further.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142354 | russell | 2008-09-10 11:39:53 -0500 (Wed, 10 Sep 2008) | 7 lines
It is a normal situation that a task gets put in the scheduler that should run
as soon as possible. Accept "0" as an acceptable time to run, and also treat
negative as "run now", and don't print a debug message about it.
(inspired by a message asking about the "request to schedule in the past"
debug message on the -dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142063 | russell | 2008-09-09 10:40:24 -0500 (Tue, 09 Sep 2008) | 5 lines
Ensure that the stored CDR reference is still valid after the bridge before
poking at it. Also, keep the channel locked while messing with this CDR.
(fixes crashes reported in issue #13409)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
or when calling ast_waitfor(). These are inappropriate times to hold the channel
lock. This is what has caused "could not get the channel lock" messages from
chan_sip and has likely caused a negative impact on performance results of SIP
in Asterisk 1.6. Thanks to file for pointing out this section of code.
(closes issue #13287)
(closes issue #13115)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141806 | russell | 2008-09-08 16:02:36 -0500 (Mon, 08 Sep 2008) | 7 lines
When doing an async goto, detect if the channel is already in the middle of a
masquerade. This can happen when chan_local is trying to optimize itself out.
If this happens, fail the async goto instead of bursting into flames.
(closes issue #13435)
Reported by: geoff2010
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Changes applied by this patch:
- Fix autocompletion in 'sip prune realtime', sip peers where never auto completed. Now we complete this command with:
'sip prune realtime peer' -> all | like | sip peers
Also I have modified the syntax in the usage, was wrong...
- Pass ast_cli_args->argv and ast_cli_args->argc while running autocompletion on CLI commands (CLI_GENERATE).
With this we avoid comparisons on ast_cli_args->line like this:
strcasestr(a->line, " description")
strcasestr(a->line, "descriptions ")
strcasestr(a->line, "realtime peer"), and so on..
Making the code more confusing (check the spaces in description!).
The only thing we must be sure is to first check a->pos or a->argc.
- Fix 'iax2 prune realtime' autocompletion, now we autocomplete this command with 'all' & 'iax2 peers', check a look that iax2 peers where all the peers, now only the ones in the cache..
(closes issue #13133)
Reported by: eliel
Patches:
clichanges.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141156 | murf | 2008-09-05 08:15:43 -0600 (Fri, 05 Sep 2008) | 1 line
A small change to prevent double-posting of CDR's; thanks to Daniel Ferrer for bringing it to our attention
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
of changes to the Set and MSet apps, so people aren't
so shocked and surprised when they upgrade from
1.4 to 1.6.
Also, for the sake of those upgrading from 1.4 to
1.6 with AEL, I provide automatic support for the
"old" way of using Set(), that still does the
exact same old thing with quotes and backslashes
and so on as 1.4 did, by having AEL compile in the
use of MSet() instead of Set(), everywhere it inserts
this code.
But, if the app_set var is set to 1.6 or higher,
it uses the "new", non-evaluative Set().
This only usually happens if the user manually
inserts this into the asterisk.conf file, or runs
the "make samples" command.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140816 | russell | 2008-09-03 08:24:35 -0500 (Wed, 03 Sep 2008) | 4 lines
Don't freak out if the poll emulation receives NULL for the pollfds array
(closes issue #13307)
Reported by: jcovert
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140747 | murf | 2008-09-02 17:36:56 -0600 (Tue, 02 Sep 2008) | 1 line
I am turning the warnings generated in ast_cdr_free and post_cdr into verbose level 2 messages. Really, they matter little to end users. You either get the CDR's you wanted, or you don't, and it is a bug.
For trunk, I am going one step further. These messages were pretty worthless even for debug, so I'm completely removing them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140690 | murf | 2008-09-02 16:40:13 -0600 (Tue, 02 Sep 2008) | 1 line
After reconsidering, with respect to 13409, ast_cdr_detach should be OK, better in fact, than ast_cdr_free, which generates lots of useless warnings that will undoubtably generate complaints.
Hmmm. It doesn't hush the useless warnings, but it does allow control of posting via the detach and post routines, for those possible situations,
where you'd want to post single-channel cdrs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140670 | murf | 2008-09-02 16:15:57 -0600 (Tue, 02 Sep 2008) | 14 lines
(closes issue #13409)
Reported by: tomaso
Patches:
asterisk-1.6.0-rc2-cdrmemleak.patch uploaded by tomaso (license 564)
I basically spent the day, verifying that this patch
solves the problem, and doesn't hurt in non-problem
cases. Why valgrind did not plainly reveal this leak
absolutely mystifies and stuns me.
Many, many thanks to tomaso for finding and providing the fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
announcement of the parking space number. Also, fixes the bug of just clearing the flags instead of actually parsing the arguments to Park.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140491 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
audio files.
(closes issue #13372)
Reported by: epicac
Patches:
13372.patch uploaded by putnopvut (license 60)
Tested by: epicac
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reported by: erousseau
This was a reasonable enhancement request, which was
easy to implement. Since it's an enhancement, it
could only be applied to trunk.
Basically, for accounting where "initiated" seconds
are billed for, if the microseconds field on the end
time is greater than the microseconds field for the
answer time, add one second to the billsec field.
The implementation was requested by erousseau, and
I've implemented it as requested. I've updated the
CHANGES, the cdr.conf.sample, and the .h files
accordingly, to accept and set a flag for the
corresponding new option. cdr.c adds in the extra
second based on the usec fields if the option is
set. Tested, seems to be working fine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13306)
Reported by: Corydon76
Patches:
20080814__bug13306__3.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, pkempgen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139927 | jpeeler | 2008-08-25 16:47:33 -0500 (Mon, 25 Aug 2008) | 3 lines
Fix a typo I made. Lesson learned, apply the patch if one exists.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139928 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139764 | murf | 2008-08-25 09:33:14 -0600 (Mon, 25 Aug 2008) | 9 lines
This patch reverts the changes made via 139347, and 139635, as users
are seeing adverse difference.
I will un-close 13251.
Back to the drawing board/ concept/ beginning/ whatever!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139635 | murf | 2008-08-22 16:24:02 -0600 (Fri, 22 Aug 2008) | 6 lines
I found some problems with the code I committed earlier, when
I merged them into trunk, so I'm coming back to clean up.
And, in the process, I found an error in the code I added
to trunk and 1.6.x, that I'll fix using this patch also.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139621 | jpeeler | 2008-08-22 16:36:13 -0500 (Fri, 22 Aug 2008) | 5 lines
(closes issue #13359)
Reported by: Laureano
Patches:
originate_channel_check.patch uploaded by Laureano (license 265)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
manager events
(closes issue #13358)
Reported by: srt
Patches:
13358_parking_events.diff uploaded by srt (license 378)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139074 | murf | 2008-08-20 11:14:55 -0600 (Wed, 20 Aug 2008) | 12 lines
(closes issue #13263)
Reported by: brainy
Tested by: murf
The specialized reset routine is tromping on the
flags field of the CDR. I made a change to not
reset the DISABLED bit. This should get rid of this
problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
by the changes made
to the Set app in trunk/1.6.x, as they come from the 1.4 world. They are only bitten if
they write their AEL dialplan in the 1.4 world, and then carry it over to a trunk/1.6.x
installation where a "make samples" was executed, or where they hand-edited the
asterisk.conf file and added the [compat] category with app_set = 1.6 (or higher).
(this commit does not totally solve 13249, at least not yet)
The change involves issueing a single warning while the AEL file is loading, if:
1. app_set is present in the config file, and set to 1.6 or higher.
2. there are double quotes in an assignment statement (eg x = "hi there";)
3. the warning was not already issued.
The standalone app, aelparse, does not (yet) issue this warning. I'd have to
have it read in the asterisk.conf file, and that's a bit of hassle. I'll add
it if users request it, tho.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
of the name/value pairs, pointed out by snuffy-home on #asterisk-commits.
For those of you who rely on the position of name/value pairs in manager
events... stop... that is why associative arrays were invented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13323)
Reported by: srt
Patches:
13323_unique_id_for_parkedcalls_event.diff uploaded by srt (license 378)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13319)
Reported by: srt
Patches:
13319_rtcp_manager_event_headers.diff uploaded by srt (license 378)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138476 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(Closes issue #13312)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13314)
Reported by: kue
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13312)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138027 | russell | 2008-08-15 10:07:16 -0500 (Fri, 15 Aug 2008) | 9 lines
Ensure that when a hangup occurs in autoservice, that a hangup frame gets
properly deferred to be read from the channel owner when it gets taken out
of autoservice.
(closes issue #12874)
Reported by: dimas
Patches:
v1-12874.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13297)
Reported by: snuffy
Patches:
bug13297_20080814.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
converted (snuffy, you there? :))
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
files from main/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
once for every bridged call
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|