| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I68a85a7fcbdb282140ff333c6274b6763d5f82a3
|
|
This reverts commit 6fca75bb628dfff2ab112e80b0228cf3ac0b8a05.
Change-Id: Ifee026cc63e22c5ac5717c37867a9f036373ae5a
|
|
When an endpoint was created, it's messages were being forwarded to
both the tech endpoint topic and the all endpoints topic. Since
the tech topic was also forwarded to all, this was resulting in
duplicate messages whenever an endpoint published. This patch
causes the endpoint to only forward to the tech topic and lets
the tech topic forward to all.
To accomplish this, the existing stasis_cp_single_create function
(which both creates and forwards) was cloned and split into 2
functions, one that creates the topic and one that sets up the
forwarding. This allows endpoint_internal_create to create
the topic from the endpoint_all cache without forwarding it there,
then allows it to do the forward to the tech's topic.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I26d7d4926a0861748fd3bdffe316b75b549a801c
|
|
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
|
|
The cache creation callback function expects to receive a sorcery_details
structure and not just a standalone object.
Change-Id: I3e4a5a137cb25292eb52d7a14cbb6daa09213450
|
|
The code in astobj2_hash.c wrongly assumed that abs(int) is always > 0.
However, abs(INT_MIN) = INT_MIN and is still negative, as well as
abs(INT_MIN) % num_buckets, and as a result this led to a crash.
One way to trigger the bug is using host=::80 or 0.0.0.128 in peer
configuration section in chan_sip or chan_iax.
This patch takes the remainder before applying abs, so that bucket
number is always in range.
ASTERISK-25100 #close
Reported by: Mark Petersen
Change-Id: Id6981400ad526f47e10bcf7b847b62bd2785e899
|
|
|
|
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
|
|
Modify ao2_weakproxy_subscribe so each new subscription is added
to the head of the list. This ensures that when other objects
are allocated and use a subscription to the weakproxy for cleanup,
cleanup will occur in the correct order.
ASTERISK-25120 #close
Change-Id: Ie0476f08ec21330de1b3f5a2dd3d9eb683df3d3d
|
|
This change adds a basic res_sorcery_memory_cache module which implements
configuration option parsing, configuration file parsing for threading,
sorcery interface implementation, and unit tests.
Objects can be added, updated, deleted, and retrieved from the memory
cache. Automatic expiration and stale handling will be added in the
future.
Note that unit tests exist within the module itself in case the
threading done as a result of expiration results in asynchronous
actions (which it likely will). Providing access and a notification
mechanism for an external test module would be complicated and
not worth it.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: Id8a6a357ef5a83d466f81eee56a67d13eeb118b9
|
|
resets"
|
|
|
|
|
|
Reset options to default values before reloading config. This ensures
that if a setting is removed or commented out of the configuration file
it is unset on reload.
ASTERISK-25112 #close
Reported by: Corey Farrell
Change-Id: Id24bb1fb0885c2c14cf8bd6f69a0c2ee7cd6c5bd
|
|
If a channel hangs up while an audio file is playing, there's
no need to clutter up the logs with a warning so suppress it
if ast_check_hangup returns true.
Also, change warning to debug/2 in file.c if writing a frame
fails. Same reasoning.
Change-Id: I2e66191af3c5b6e951c98e8f1c3fe3cf2cf7ed89
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
Currently, everytime a sample rate change occurs (on read or write) the
associated factory buffers are reset. If the requested sample rate on a
read differed from that of a write then the buffers are continually reset
on every read and write. This has the side effect of emptying the buffer,
thus there being no data to read and then write to a file in the case of
call recording.
This patch fixes it so that an audiohook_list's rate always maintains the
maximum sample rate among hooks and formats. Audiohook sample rates are
only overwritten by this value when slin native compatibility is turned on.
Also, the audiohook sample rate can only overwrite the list's sample rate
when its rate is greater than that of the list or if compatibility is
turned off. This keeps the rate from constantly switching/resetting.
ASTERISK-24944 #close
Reported by: Ronald Raikes
Change-Id: Idab4dfef068a7922c09cc631dda27bc920a6c76f
|
|
This patch fixes a number of errors and warning messages in the doxygen
log. Specifically, it addresses:
* A number of files incorrectly places a '\brief' tag immediately after
a '\file' tag. Doing so emits a warning, as '\file' takes an optional
argument specifying which file the doxygen comment is for. As '\brief'
is not a file, doxygen was unamused.
* A grouping of Stasis Topics and Messages in rtp_engine.h was
incorrectly terminated. We now correctly terminate the grouping, which
prevents members of rtp_engine.h from showing up in the wrong group.
* Group indicators which are not part of the Stasis Topics and Messages
group were removed. Group indicators without an \addtogroup or
\ingroup have no meaning.
Change-Id: Ia1415ffec6767e27233ae1cae5ed5970de5656d4
|
|
ASTERISK-24887 #close
Reported by: Makoto Dei
Tested by: tensai
Change-Id: I6a96f572adb17f76b3acafe503a01c48eb5dd9bf
|
|
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
|
|
verification."
|
|
|
|
When the new Bridging API was implemented, the workspace variable
changed to a malloc'd string, causing sizeof() to always be 8 (char).
Revert back to stored on stack string for workspace.
ASTERISK-25090 #close
Change-Id: I51e610ae87371df771ce7693a955510efb90f8f7
|
|
server socket."
|
|
When a client connects to a server via SSL/TLS, the server commonly utilizes an
RSA key-pair. However, other such algorithms exist (i.e. DSA and ECDSA), and if
the server socket is configured with a certificate for either one of those, it
would lose its compatibility with RSA-only clients.
Now, the server socket can be configured with up to one RSA, ECDSA and DSA key
each. For example, if a client is not compatible with SHA-2 hashed certificates
like Nokia mobile phones, the server socket still can use RSA/SHA-1 for legacy
clients and ECDSA/SHA-2 for everyone else.
ASTERISK-24815 #close
Reported by: Alexander Traud
patches:
tls_rsa_ecc_dsa.patch uploaded by Alexander Traud (License 6520)
Change-Id: Iada5e00d326db5ef86e0af7069b4dfa1b979da9a
|
|
verification.
This way one X.509 certificate can be used for hosts that
can be reached under multiple DNS names or for multiple hosts.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
ASTERISK-25063 #close
Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f
|
|
|
|
The message channel is a special channel that doesn't actually process frames.
However, certain actions can cause frames to be placed in the channel's read
queue including the Hangup application which is called on the channel after
each message is processed. Since the channel will continually be reused for
many messages, it's necessary to flush these frames at some point.
ASTERISK-25083 #close
Reported by: Jonathan Rose
Change-Id: Idf18df73ccd8c220be38743335b5c79c2a4c0d0f
|
|
|
|
|
|
There are 3 ways that calls directly to standard allocator functions can
be dealt with:
1. Block their use, cause them to generate an error. This is the default.
2. Replace them with the Asterisk equivalent function calls.
3. Leave them alone.
This change allows one of these 3 options to be selected by any source.
The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
or ASTMM_IGNORE to use option 1, 2 or 3 respectively. Normally ASTMM_BLOCK
is the correct option, so it is default when ASTMM_LIBC is not defined.
In some cases when building 3rd party code it is desirable to have it use
Asterisk functions, without changing the whole source - ASTMM_REDIRECT
accomplishes this. When using 3rd party libraries sometimes a static
inline function will make use of malloc or free. In these cases it may
be unsafe to replace the allocator in the header, as it's possible the
memory could be freed by the library using standard allocators. For
those cases ASTMM_IGNORE is needed.
Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7
|
|
Previous versions of Asterisk processed command-line options before
processing asterisk.conf. This meant that if an option was set in
asterisk.conf, it could not be overridden with the equivelent command
line option. This change causes Asterisk to process the command-line
twice. First it processes options that are needed to load asterisk.conf,
then it processes the remaining options after the config is read.
This changes the function of -X slightly. Previously using -X without
disabling execincludes in asterisk.conf caused #exec to be usable in any
config. Now -X only enables #exec for the load of asterisk.conf, if it
is wanted in the rest of the system it must be enabled with execincludes
in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect
the limited function of -X.
ASTERISK-25042 #close
Reported by: Corey Farrell
Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7
|
|
Currently you can 'apply' a wizard to an object type but the wizard
always goes at the end of the object type's wizard list. This patch
adds a new ast_sorcery_insert_wizard_mapping function that allows
you to insert a wizard anyplace in the list. I.E. You could
add a caching wizard to an object type and place it before all
wizards.
ast_sorcery_get_wizard_mapping_count and
ast_sorcery_get_wizard_mapping were added to allow examination
of the mapping list.
ast_sorcery_remove_mapping was added to remove a mapping by name.
As part of this patch, the object type's wizard list was converted
from an ao2_container to an AST_VECTOR_RW.
A new test was added to test_sorcery for this capability.
ASTERISK-25044 #close
Change-Id: I9d2469a9296b2698082c0989e25e6848dc403b57
|
|
The code which reads asterisk.conf supports processing the debug
option with ast_true, but ast_true returns -1. This causes debug
to still be off, convert to 1 so debug will be on as requested.
ASTERISK-25042
Reported by: Corey Farrell
Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6
|
|
non-zero."
|
|
The DNS SRV sorting code currently has an issue when records with a priority
of zero exist with records of a non-zero priority. This occurs because the
sorting code considers zero to mean unset when in reality is a valid
value. If the current priority is zero it will get replaced with any remaining
record that has a priority of non-zero, until no records of those exist after
which the records of priority zero are handled.
This change makes it so that the priority of the first remaining record is
the current starting priority. There is also a small optimization to prevent
iterating records when the starting priority is already zero.
Change-Id: I103511f35b50428f770bd4db3ffef70fb6f82d35
|
|
|
|
* changes:
CLI: Enable automatic references to modules.
Modules: Make ast_module_info->self available to auxiliary sources.
|
|
transfer."
|
|
Change-Id: I26d4d2cb9cee924632ff59ef0b30a7e6a1e2b00d
|
|
Fix the alphabetic order added on ast_manager_register_struct. The order
for struct manager_action added is not working, this change fixes the
problem.
Change-Id: I149da0cd06c3c4445d7516cc303358e9f26f8b4b
|
|
A crash happens with this sequence of steps:
1) Party A is connected to party B.
2) Party B starts a DTMF attended transfer.
3) Party A hangs up while party B is dialing party C.
When party A hangs up the bridge that party A and party B are in is
dissolved and party B is kicked out of the bridge. When party B finishes
dialing party C he attempts to move to the new bridge with party C. Since
party B is no longer in a bridge the attempted move dereferences a NULL
bridge_channel pointer and crashes.
* Made the hold(), unhold(), ringing(), and the bridge_move() functions
tolerant of the channel not being in a bridge. The assertion that party B
is always in a bridge is not true if the bridged peer of party B hangs up
and dissolves the bridge. Being tolerant of not being in a bridge allows
the peer hangup stimulus to be processed by the FSM.
* Made the bridge_move() function return void since where the return value
for a failed move was checked generated a FSM coding ERROR message for a
normal off-nominal condition.
* Eliminated most uses of RAII_VAR in bridge_basic.c.
ASTERISK-25003 #close
Reported by: Artem Volodin
Change-Id: Ie2c1b14e5e647d4ea6de300bf56d69805d7bcada
|
|
|
|
|
|
ERR_remove_state was deprecated with OpenSSL 1.0.0 and was replaced by
ERR_remove_thread_state. ERR_load_SSL_strings and ERR_load_BIO_strings were
called by SSL_load_error_strings already and got removed. These changes allow
OpenSSL forks like BoringSSL to be used with Asterisk.
ASTERISK-25043 #close
Reported by: Alexander Traud
patches:
asterisk_with_BoringSSL.patch uploaded by Alexander Traud (License 6520)
Change-Id: If1c0871ece21a7e0763fafbd2fa023ae49d4d629
|
|
|
|
A recent change went into Asterisk which added reference counts to the
channels stored in a dial masquerade datastore. Unfortunately this
included a reference to the caller in a dialing operation. While all
of the dialed targets have the datastore removed from them upon dialing
completion this did not occur for the caller, causing it to have a
reference to itself that could go never go away (as it depended on
the destruction of the datastore which only happened when the channel
was destroyed). This resulted in the caller channel remaining on the
system despite it having hung up.
This change does the following to fix this issue:
1. The dial masquerade datastore is now removed from the caller upon
dialing completion, just like the dialed targets.
2. Upon destruction of the caller all the dialed targets are also
removed from the dial masquerade datastore (just in case).
3. The reference to the caller has been removed as it should not be
possible for the datastore to now be valid/useful after the lifetime
of the caller has ended.
ASTERISK-25025 #close
Change-Id: I1ef4ca5ca04980028604cc2af5d2992ac3431b3f
|
|
* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
the reference when complete.
ASTERISK-25049 #close
Reported by: Corey Farrell
Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3
|
|
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
|
|
Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
does replace not insert. The few users of AST_VECTOR_INSERT were
refactored. Because these are macros, there should be no ABI
compatibility issues.
Added AST_VECTOR_INSERT_AT that actually inserts an element into the
vector at a specific index pushing existing elements to the right.
Added AST_VECTOR_GET_CMP that can retrieve from the vector based
on a user-provided compare function.
Added AST_VECTOR_CALLBACK function that will execute a function
for each element in the vector. Similar to ao2_callback and
ao2_callback_data functions although the vector callback can take
a variable number of arguments. This should allow easy migration
to a vector where a container might be too heavy.
Added read/write locked vector and lock manipulation macros.
Added unit tests.
ASTERISK-25045 #close
Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0
|
