| Age | Commit message (Collapse) | Author |
|---|
|
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
|
|
|
|
In ast_websocket_read() we were not adequately checking that the
payload_len was non-zero before passing it to ws_safe_read(). Calling
ws_safe_read with a len argument of 0 will result in a busy loop until
the underlying socket is closed.
ASTERISK-27658 #close
Change-Id: I9d59f83bc563f711df1a6197c57de473f6b0663a
|
|
Change-Id: Ic449ea832bc81a1671c0e910c5fbe8c683e3da89
|
|
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
|
|
clang 5.0 warned about this.
ASTERISK-27557
Change-Id: I7cceaa88e147cbdf81a3a7beec5c1c20210fa41e
|
|
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
|
|
Previously for PJSIP the local address of WebSocket connections
was set to the remote address. For logging purposes this is
not particularly useful.
The WebSocket API has been extended to allow the local
address to be queried and this is used in PJSIP to set the
local address to the correct value.
The PJSIP HEP support has also been tweaked so that reliable
transports always use the local address on the transport
and do not try to (wrongly) guess. As they are connection
based it is impossible for the source to be anything else.
ASTERISK-26758
ASTERISK-27363
Change-Id: Icd305fd038ad755e2682ab2786e381f6bf29e8ca
|
|
Once an Optional API module is loaded it should stay loaded. Unloading
an optional API module runs the risk of a crash if something else is
using it. This patch causes all optional API providers to tell the
module loader not to unload except at shutdown.
ASTERISK-27389
Change-Id: Ia07786fe655681aec49cc8d3d96e06483b11f5e6
|
|
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
|
|
When doing some WebRTC testing, I found that the websocket would
disconnect whenever I attempted to place a call into Asterisk. After
looking into it, I pinpointed the problem to be due to the iostreams
change being merged in.
Under certain circumstances, a call to ast_iostream_read() can return a
negative value. However, in this circumstance, the websocket code was
treating this negative return as if it were a partial read from the
websocket. The expected length would get adjusted by this negative
value, resulting in the expected length being too large.
This patch simply adds an if check to be sure that we are only updating
the expected length of a read when the return from a read is positive.
ASTERISK-26842 #close
Reported by Mark Michelson
Change-Id: Ib4423239828a013d27d7bc477d317d2f02db61ab
|
|
Expression 'rlen < 0' is always false.
Unsigned type value is never < 0.
Change-Id: Id9f393ff25b009a6c4a6e40b95f561a9369e4585
|
|
|
|
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
|
|
Not surprisingly, using Respoke (and possibly other systems) it is
possible to blow past the 16k limit for a WebSocket packet size. This
patch bumps it up to 32k, which, at least for Respoke, is sufficient.
For now.
Because 32k is laughable on a LOW_MEMORY system (as is 16k, for that
matter), this patch adds a LOW_MEMORY directive that sets the buffer to
8k for systems who have asked for their reduced memory availability to
be considered.
Change-Id: Id235902537091b58608196844dc4b045e383cd2e
|
|
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
|
|
Websockets are a core part of ARI support and as such this
module should also be core supported.
Change-Id: I8f9283c6a167152761b92984779bb39e3db51a9c
|
|
Updated ast_websocket_write to encode the entire frame in to one
write operation, to ensure that we don't end up with a situation
where the websocket header has been sent, while the body can not
be written.
Previous to August's patch in commit b9bd3c14, certain network
conditions could cause the header to be written, and then the
sub-sequent body to fail - which would cause the next successful
write to contain a new header, and a new body (resulting in
the peer receiving two headers - the second of which would be
read as part of the body for the first header).
This was patched to have both write operations individually fail
by closing the websocket.
In a case available to the submitter of this patch, the same
body which would consistently fail to write, would succeed
if written at the same time as the header.
This update merges the two operations in to one, adds debug messages
indicating the reason for a websocket connection being closed during
a write operation, and clarifies some variable names for code legibility.
Change-Id: I4db7a586af1c7a57184c31d3d55bf146f1a40598
|
|
Change-Id: I228df6adecd4cb450d03e09e9a38c86bb566e811
|
|
* Remove extraneous unlock on off-nominal path.
* Add missing HTTP error reply.
Change-Id: I1f402bfe448fba8696b507477cab5f060ccd9b2b
|
|
Due to the use of ast_websocket_close in session termination it is
possible for the underlying socket to already be closed when the
session is terminated. This occurs when the close frame is attempted
to be written out but fails.
Change-Id: I7572583529a42a7dc911ea77a974d8307d5c0c8b
|
|
The res_http_websocket module will currently attempt to close
the WebSocket connection if fatal cases occur, such as when
attempting to write out data and being unable to. When the
fatal cases occur the code attempts to write a WebSocket close
frame out to have the remote side close the connection. If
writing this fails then the connection is not terminated.
This change forcefully terminates the connection if the
WebSocket is to be closed but is unable to send the close frame.
ASTERISK-25312 #close
Change-Id: I10973086671cc192a76424060d9ec8e688602845
|
|
We don't have a compatability function to fill in a missing htobe64; but
we already have one for the identical htonll.
Change-Id: Ic0a95db1c5b0041e14e6b127432fb533b97e4cac
|
|
Commit 39cc28f6ea2140ad6d561fd4c9e9a66f065cecee attempted to fix a
test failure observed on 32 bit test agents by ensuring that a cast from
a 32 bit unsigned integer to a 64 bit unsigned integer was happening in
a predictable place. As it turns out, this did not cause test runs to
succeed.
This commit adds several redundant debug messages that print the payload
lengths of websocket frames. The idea here is that this commit will not
cause tests to succeed for the faulty test agent, but we might deduce
where the fault lies more easily this way by observing at what point the
expected value (537) changes to some ungangly huge number.
If you are wondering why something like this is being committed to the
branch, keep in mind that in commit
39cc28f6ea2140ad6d561fd4c9e9a66f065cecee I noted that the observed test
failures only happen when automated tests are run. Attempts to run the
tests by hand manually on the test agent result in the tests passing.
Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d
|
|
We have seen a rash of test failures on a 32-bit build agent. Commit
48698a5e21d7307f61b5fb2bd39fd593bc1423ca solved an obvious problem where
we were not encoding a 64-bit value correctly over the wire. This
commit, however, did not solve the test failures.
In the failing tests, ARI is attempting to send a 537 byte text frame
over a websocket. When sending a frame this small, 16 bits are all that
is required in order to encode the payload length on the websocket
frame. However, ast_websocket_write() thinks that the payload length is
greater than 65535 and therefore writes out a 64 bit payload length.
Inspecting this payload length, the lower 32 bits are exactly what we
would expect it to be, 537 in hex. The upper 32 bits, are junk values
that are not expected to be there.
In the failure, we are passing the result of strlen() to a function that
expects a uint64_t parameter to be passed in. strlen() returns a size_t,
which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit
unsigned value to somewhere where a 64-bit unsigned value is expected
would cause no problems. In fact, in manual runs of failing tests, this
works just fine. However, ast_websocket_write() uses the Asterisk
optional API, which means that rather than a simple function call, there
are a series of macros that are used for its declaration and
implementation. These macros may be causing some sort of error to occur
when converting from a 32 bit quantity to a 64 bit quantity.
This commit changes the logic by making existing ast_websocket_write()
calls use ast_websocket_write_string() instead. Within
ast_websocket_write_string(), the 64-bit converted strlen is saved in a
local variable, and that variable is passed to ast_websocket_write()
instead.
Note that this commit message is full of speculation rather than
certainty. This is because the observed test failures, while always
present in automated test runs, never occur when tests are manually
attempted on the same test agent. The idea behind this commit is to fix
a theoretical issue by performing changes that should, at the least,
cause no harm. If it turns out that this change does not fix the failing
tests, then this commit should be reverted.
Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67
|
|
|
|
Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis
applications were registered. This was done such that the WebSocket would be
ready when an application is registered. However, by creating the WebSocket
first, the client had the ability to make requests for the Stasis application
it thought had been created with the initial handshake request. The inevitable
conclusion of this scenario was the cart being put before the horse.
ASTERISK-24988 resolved half of the problem by ensuring that the applications
were created and registered with Stasis prior to completing the handshake
with the client. While this meant that Stasis was ready when the client
received the green-light from Asterisk, it also meant that the WebSocket was
not yet ready for Stasis to dispatch messages.
This patch introduces a message queuing mechanism for delaying messages from
Stasis applications while the WebSocket is being constructed. When the ARI
event processor receives the message from the WebSocket that it is being
created, the event processor instantiates an event session which contains a
message queue. It then tries to create and register the requested applications
with Stasis. Messages that are dispatched from Stasis between this point and
the point at which the event processor is notified the WebSocket is ready, are
stashed in the queue. Once the WebSocket has been built, the queue's messages
are dispatched in the order in which they were originally received and the
queue is concurrently cleared.
ASTERISK-25181 #close
Reported By: Matt Jordan
Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17
|
|
A test agent was continuously failing all ARI tests when run against
Asterisk 13. As it turns out, the reason for this is that on those test
runs, for some reason we decided to use the super extended 64 bit
payload length for websocket text frames instead of the extended 16 bit
payload length. For 64-bit payloads, the expected byte order over the
network is
7, 6, 5, 4, 3, 2, 1, 0
However, we were sending the payload as
3, 2, 1, 0, 7, 6, 5, 4
This meant that we were saying to expect an absolutely MASSIVE payload
to arrive. Since we did not follow through on this expected payload
size, the client would sit patiently waiting for the rest of the payload
to arrive until the test would time out.
With this change, we use the htobe64() function instead of htonl() so
that a 64-bit byte-swap is performed instead of a 32 bit byte-swap.
Change-Id: Ibcd8552392845fbcdd017a8c8c1043b7fe35964a
|
|
This change makes it so that when accepting a WebSocket
connection the HTTP response is sent as one packet instead of
fragmented. Browsers don't like it when you send it fragmented.
ASTERISK-25103
Change-Id: I9b82c4ec2949b0bce692ad0bf6f7cea9709e7f69
|
|
This patch updates http_websocket and its corresponding implementation
with a pre-session established callback. This callback allows for
WebSocket server consumers to be notified when a WebSocket connection is
attempted, but before we accept it. Consumers can choose to reject the
connection, if their application specific logic allows for it.
As a result, this patch pulls out the previously private
websocket_protocol struct and makes it public, as
ast_websocket_protocol. In order to preserve backwards compatibility
with existing modules, the existing APIs were left as-is, and new APIs
were added for the creation of the ast_websocket_protocol as well as for
adding a sub-protocol to a WebSocket server.
In particular, the following new API calls were added:
* ast_websocket_add_protocol2 - add a protocol to the core WebSocket
server
* ast_websocket_server_add_protocol2 - add a protocol to a specific
WebSocket server
* ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
Consumers can populate this with whatever callbacks they wish to
support, then add it to the core server or a specified server.
ASTERISK-24988
Reported by: Joshua Colp
Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2
|
|
Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
|
|
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
|
|
Some WebSocket applications, like [chan_respoke][], require a larger
frame size than the default 8k; this patch bumps the default to 16k.
This patch also fixes some problems exacerbated by large frames.
The sanity counter was decremented on every fread attempt in
ws_safe_read(), regardless of whether data was read from the socket or
not. For large frames, this could result in loss of sanity prior to
reading the entire frame. (16k frame / 1448 bytes per segment = 12
segments).
This patch changes the sanity counter so that it only decrements when
fread() doesn't read any bytes. This more closely matches the original
intention of ws_safe_read(), given that the error message is
"Websocket seems unresponsive".
This patch also properly logs EOF conditions, so disconnects are no
longer confused with unresponsive connections.
[chan_respoke]: https://github.com/respoke/chan_respoke
Review: https://reviewboard.asterisk.org/r/4431/
........
Merged revisions 432236 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432237 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When writing to a websocket if a timeout occurred the underlying socket did not
get closed/disconnected. This patch makes sure the websocket gets disconnected
on a write timeout. Also a notice is logged stating that the websocket was
disconnected.
ASTERISK-24701 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4412/
........
Merged revisions 431669 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 431670 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This won't fix the reported issue but it is an incorrect use of sizeof.
ASTERISK-24566
Reported by: Badalian Vyacheslav
........
Merged revisions 429867 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429868 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
payload length of zero.
Frames with a payload length of 0 were incorrectly handled in res_http_websocket.
Provided a frame with a payload had been received prior it was possible for a double
free to occur. The realloc operation would succeed (thus freeing the payload) but be
treated as an error. When the session was then torn down the payload would be
freed again causing a crash. The read function now takes this into account.
This change also fixes assumptions made by users of res_http_websocket. There is no
guarantee that a frame received from it will be NULL terminated.
ASTERISK-24472 #close
Reported by: Badalian Vyacheslav
Review: https://reviewboard.asterisk.org/r/4220/
Review: https://reviewboard.asterisk.org/r/4219/
........
Merged revisions 429270 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429272 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429273 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In websocket_add_protocol_internal is used to add the "echo"
protocol, but ast_websocket_remove_protocol is used to remove
it. This causes an extra call to ast_module_unref.
ASTERISK-24480 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4140/
........
Merged revisions 427200 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427201 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When Moises committed the fixes for WSS (which was a great patch), wdoekes had
a few style nits that were on the review that got missed. This patch resolves
what I *think* were all of the ones that were still on the review.
Thanks to both moy for the patch, and wdoekes for the reviews.
Review: https://reviewboard.asterisk.org/r/3248/
........
Merged revisions 426209 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 426210 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 426211 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/3914/
........
Merged revisions 421210 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
"module show" .
ASTERISK-23919 #close
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/3802
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There was a problem when reading a string from the websocket. It assumed the
received data had a null terminator and tried to write the data to an ast_str.
This of course could/would read past the end of the given buffer while
writing the data to the internal buffer of ast_str. Modified the the code to
correctly place a null terminator on the result string.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416394 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415896 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a websocket server client in Asterisk. Asterisk has a websocket server,
but not a client. The ability to have Asterisk be able to connect to a websocket
server can potentially be useful for future work (for instance this could allow
ARI to connect back to some external system, although more work would be needed
in order to incorporate that).
Also a couple of things to note - proxy connection support has not been
implemented and there is limited http response code handling (basically, it is
connect or not).
Also added an initial new URI handling mechanism to core. Internet type URI's
are parsed into a data structure that contains pointers to the various parts of
the URI.
(closes issue ASTERISK-23742)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/3541/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
........
Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This resolves a race condition where data could be written to a NULL
FILE pointer causing a crash as a websocket connection was in the
process of shutting down by adding locking to websocket session writes
and by deferring session teardown until session destruction.
(closes issue ASTERISK-23605)
Review: https://reviewboard.asterisk.org/r/3481/
Reported by: Matt Jordan
........
Merged revisions 413123 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413124 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
format for uint64_t
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Several fixes for the WebSockets implementation in res/res_http_websocket.c
* Flush the websocket session FILE* as fwrite() may not actually guarantee sending
the data to the network. If we do not flush, it seems that buffering on the SSL
socket for outbound messages causes issues
* Refactored ast_websocket_read to take into account that SSL file descriptors
may be ready to read via fread() but poll() will not actually say so because
the data was already read from the network buffers and is now in the libc buffers
(closes issue ASTERISK-23099)
(closes issue ASTERISK-21930)
Review: https://reviewboard.asterisk.org/r/3248/
........
Merged revisions 409681 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 409697 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When I moved the ARI WebSocket from /ws to /ari/events, I added code to
allow a WebSocket to connect without specifying the subprotocol if
there's only one subprotocol handler registered for the WebSocket.
Naively, I coded it to always respond with the subprotocol in use.
Unfortunately, according to RFC 6455, if the server's response includes
a subprotocol header field that "indicates the use of a subprotocol that
was not present in the client's handshake [...], the client MUST _Fail
the WebSocket Connection_.", emphasis theirs.
This patch correctly omits the Sec-WebSocket-Protocol if one is not
specified by the client.
(closes issue ASTERISK-22441)
Review: https://reviewboard.asterisk.org/r/2828/
........
Merged revisions 399039 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
