| Age | Commit message (Collapse) | Author |
|---|
|
If the saved SUBSCRIBE message is not parseable for whatever reason then
Asterisk could crash when libpjsip tries to parse the message and adds an
error message to the parse error list.
* Made ast_sip_create_rdata() initialize the parse error rdata list. The
list is checked after parsing to see that it remains empty for the
function to return successful.
ASTERISK-25306
Reported by Mark Michelson
Change-Id: Ie0677f69f707503b1a37df18723bd59418085256
|
|
The ast_sip_sanitize_xml function is used to sanitize
a string for placement into XML. This is done by examining
an input string and then appending values to an output
buffer. The function used by its implementation, strncat,
has specific behavior that was not taken into account.
If the size of the input string exceeded the available
output buffer size it was possible for the sanitization
function to write past the output buffer itself causing
a crash. The crash would either occur because it was
writing into memory it shouldn't be or because the resulting
string was not NULL terminated.
This change keeps count of how much remaining space is
available in the output buffer for text and only allows
strncat to use that amount.
Since this was exposed by the res_pjsip_pidf_digium_body_supplement
module attempting to send a large message the maximum allowed
message size has also been increased in it.
A unit test has also been added which confirms that the
ast_sip_sanitize_xml function is providing NULL terminated
output even when the input length exceeds the output
buffer size.
ASTERISK-25304 #close
Change-Id: I743dd9809d3e13d722df1b0509dfe34621398302
|
|
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
|
|
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
|
|
Previously Asterisk did not properly failover to the next resolved DNS
address when a endpoint could not be reached. With this patch, and while
using res_pjsip, SIP requests (both in/out of dialog) now attempt to use
the next address in the list of resolved addresses until a proper response
is received or no more addresses are left.
ASTERISK-25076 #close
Reported by: Joshua Colp
Change-Id: Ief14f4ebd82474881f72f4538f4577f30af2a764
|
|
|
|
When performing some provider testing, the rewrite_contact option was
interfering with proper construction of a route set when sending an ACK
after receiving a 200 OK response to an INVITE.
The initial INVITE was sent to address sip:foo. The 200 OK had a Contact
header with URI sip:bar. In addition, the 200 OK had Record-Route
headers for sip:baz and sip:foo, in that order. Since the Record-Route
headers had the lr parameter, the result should have been:
* Set R-URI of the ACK to sip:bar.
* Add Route headers for sip:foo and sip:baz, in that order.
However, the rewrite_contact option resulted in our rewriting the
Contact header on the 200 OK to sip:foo. The result was:
* R-URI remained sip:foo.
* We added Route headers for sip:foo and sip:baz, in that order.
The result was that sip:bar was not indicated in the ACK at all, so the
far end never received our ACK. The call eventually dropped.
The intention of rewrite_contact is to rewrite the most immediate
destination of our SIP request to be the same address on which we
received a request or response. In the case of processing a SIP response
with Record-Route headers, this means that instead of rewriting the
Contact header, we should instead rewrite the bottom-most Record-Route
header. In the case of processing a SIP request with Record-Route
headers, this means we rewrite the top-most Record-route header.
Like when we rewrite the Contact header, we also ensure to update
the dialog's route set if it exists.
ASTERISK-25196 #close
Reported by Mark Michelson
Change-Id: I9702157c3603a2d0bd8a8215ac27564d366b666f
|
|
A module trying to unload needs to wait for all serializers it creates and
uses to complete processing before unloading.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059
|
|
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
|
|
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject when using an external DNS resolver to process messages for the
transaction.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_resolver.c use the requesting thread's serializer to execute
the async callback.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
ASTERISK-25115 #close
Reported by: John Bigelow
Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
|
|
Associated with ASTERISK-25131
Change-Id: Iefa3b2066cfd8b108a90d2dd4a64d92c3a195d33
|
|
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
|
|
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
|
|
Odd behaviors have been observed during outbound registrations. The most
common problem witnessed has been one where a request with
authentication credentials cannot be created after receiving a 401
response. Other behaviors include apparently processing an incorrect SIP
response.
Inspecting the code led to an apparent issue with regards to how we
handle transactions in outbound registration code. When a response to a
REGISTER arrives, we save a pointer to the transaction and then push a
task onto the registration serializer. Between the time that we save the
pointer and push the task, it's possible for the transaction to be
destroyed due to a timeout. It's also possible for the address to be
reused by the transaction layer for a new transaction.
To allow for authentication of a REGISTER request to be authenticated
after the transaction has timed out, we now hold a reference to the
original REGISTER request instead of the transaction. The function for
creating a request with authentication has been altered to take the
original request instead of the transaction where the original request
was sent.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a
|
|
Currently we use pjsip_parse_hdr to validate contact uris but it
appears that it allows uris without a scheme if there's a port
supplied. I.E myexample.com will fail but myexample.com:5060 will
pass even though it has no scheme. This causes SEGVs later on
whenever the uri is used.
To prevent this, permanent_contact_validate has been updated to check
that the scheme is either 'sip' or 'sips'.
2 uses of possibly-null endpoint have also been fixed in
create_out_of_dialog_request.
ASTERISK-24999
Change-Id: Ifc17d16a4923e1045d37fe51e43bbe29fa556ca2
Reported-by: Brad Latus
|
|
* changes:
res_pjsip: Add global option to limit the maximum time for initial qualifies
pjsip_options: Add qualify_timeout processing and eventing
res_pjsip: Refactor endpt_send_request to include transaction timeout
|
|
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
This is the first follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
Since we currently have no control over pjproject transaction timeout, this
patch pulls the pjsip_endpt_send_request function out of pjproject and into
res_pjsip/endpt_send_transaction in order to implement that capability.
Now when the transaction is initiated, we also schedule our own pj_timer with
our own desired timeout.
If the transaction completes before either timeout, pjproject cancels its timer,
and calls our tsx callback where we cancel our timer and run the app callback.
If the pjproject timer times out first, pjproject calls our tsx callback where
we cancel our timer and run the app callback.
If our timer times out first, we terminate the transaction which causes
pjproject to cancel its timer and call our tsx callback where we run the app
callback.
Regardless of the scenario, pjproject is calling the tsx callback inside the
group_lock and there are checks in the callback to make sure it doesn't run
twice.
As part of this patch ast_sip_send_out_of_dialog_request was created to replace
its similarly named private function. It takes a new timeout argument in
milliseconds (<= 0 to disable the timeout).
ASTERISK-24863 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I0778dc730d9689c5147a444a04aee3c1026bf747
|
|
This change adds the following:
1. A query set implementation. This is an API that allows queries to be executed in parallel and once all have completed a callback is invoked.
2. Unit tests for the query set implementation.
3. An external PJSIP resolver which uses the DNS core API to do NAPTR, SRV, AAAA, and A lookups.
For the resolver it will do NAPTR, SRV, and AAAA/A lookups in parallel. If NAPTR or SRV
are available it will then do more queries. And so on. Preference is NAPTR > SRV > AAAA/A,
with IPv6 preferred over IPv4. For transport it will prefer TLS > TCP > UDP if no explicit
transport has been provided. Configured transports on the system are taken into account to
eliminate resolved addresses which have no hope of completing.
ASTERISK-24947 #close
Reported by: Joshua Colp
Change-Id: I56cb03ce4f9d3d600776f36928e0b3e379b5d71e
|
|
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
........
Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a new CLI command for res_pjsip that shows both global and system
configuration settings: pjsip show settings
ASTERISK-24918 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/4597/
........
Merged revisions 434527 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When setting the configuration option 'timers' equal to 'no' the bit flag was
not properly negated. This patch clears all associated flags and only sets the
specified one. pjsip will handle any necessary flag combinations. Also went
ahead and did similar for the '100rel' option.
ASTERISK-24910 #close
Reported by: Ray Crumrine
Review: https://reviewboard.asterisk.org/r/4582/
........
Merged revisions 434131 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Asterisk had an issue where retransmissions of MESSAGE requests resulted in
Asterisk processing the retransmission as if it were a new MESSAGE request.
This patch fixes the issue by creating a transaction in PJSIP on the incoming
request. This way, if a retransmission arrives, the PJSIP transaction layer
will resend the response and Asterisk will not ever see the retransmission.
ASTERISK-24920 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4532/
........
Merged revisions 433619 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Move most of res_pjsip:module_unload to unload_pjsip to resolve crashes
caused by running PJSIP functions from non-PJSIP threads.
* Remove call to pjsip_endpt_destroy(ast_pjsip_endpoint), it was causing
crashes in some cases. In theory pj_shutdown() should take care of this.
* Mark res_pjsip_keepalive and res_pjsip_session as allowed to unload at
shutdown.
* Resolve leaked config global in res_pjsip_notify.
* Unregister pubsub pjsip service module.
* Implement cleanup for res_pjsip_session.
ASTERISK-24731 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4498/
........
Merged revisions 433469 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
messages.
Incoming PJSIP call legs that have not been answered yet send unnecessary
"180 Ringing" or "183 Progress" messages every time a connected line
update happens. If the outgoing channel is also PJSIP then the incoming
channel will always send a "180 Ringing" or "183 Progress" message when
the outgoing channel sends the INVITE.
Consequences of these unnecessary messages:
* The caller can start hearing ringback before the far end even gets the
call.
* Many phones tend to grab the first connected line information and refuse
to update the display if it changes. The first information is not likely
to be correct if the call goes to an endpoint not under the control of the
first Asterisk box.
When connected line first went into Asterisk in v1.8, chan_sip received an
undocumented option "rpid_immediate" that defaults to disabled. When
enabled, the option immediately passes connected line update information
to the caller in "180 Ringing" or "183 Progress" messages as described
above.
* Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
"183 Progress" messages. The default is "no" to disable sending the
unnecessary messages.
ASTERISK-24781 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4473/
........
Merged revisions 433338 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Valgrind found some memory leaks associated with
ast_pjsip_rdata_get_endpoint(). The leaks would manifest when sending
responses to OPTIONS requests, processing MESSAGE requests, and
res_pjsip supplements implementing the incoming_request callback.
* Fix ast_pjsip_rdata_get_endpoint() endpoint ref leaks in
res/res_pjsip.c:supplement_on_rx_request(),
res/res_pjsip/pjsip_options.c:send_options_response(),
res/res_pjsip_messaging.c:rx_data_to_ast_msg(), and
res/res_pjsip_messaging.c:send_response().
* Eliminated RAII_VAR() use with ast_pjsip_rdata_get_endpoint() in
res/res_pjsip_nat.c:nat_on_rx_message().
* Fixed inconsistent but benign return value in
res/res_pjsip/pjsip_options.c:options_on_rx_request().
Review: https://reviewboard.asterisk.org/r/4511/
........
Merged revisions 433222 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Updated some documentation stating that endpoint identifiers registered without
a name are place at the front of the lookup list. Also renamed register method
'ast_sip_register_endpoint_identifier_by_name' to
'ast_sip_register_endpoint_identifier_with_name'
ASTERISK-24840
Reported by: Mark Michelson
........
Merged revisions 433031 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
........
Merged revisions 433028 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 433005 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to a break in binary compatibility with some other modules these changes
are being reverted until the issue can be resolved.
ASTERISK-24840
Reported by: Mark Michelson
........
Merged revisions 432868 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
........
Merged revisions 432638 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
is invalid.
ASTERISK-24499 #close
Reported by: Rusty Newton
........
Merged revisions 432118 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432119 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In this collection of small patches to prevent
Valgrind errors are: fixes for reference leaks
in config hooks, evaluating a parameter beyond
bounds, and accessing a structure after a lock
where it could have been already free'd.
Review: https://reviewboard.asterisk.org/r/4407/
........
Merged revisions 431583 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
RFC 3261 sections 8.1.1.8 and 12.1.1 dictate specific
scenarios when we are required to use SIPS URIs in Contact
headers. Asterisk's non-compliance with this could actually
cause calls to get dropped when communicating with clients
that are strict about checking the Contact header.
Both of the SIP stacks in Asterisk suffered from this issue.
This changeset corrects the behavior in res_pjsip/chan_pjsip.c
Review: https://reviewboard.asterisk.org/r/4345
........
Merged revisions 431426 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Performing a CLI "module reload" command when there are new pjsip.conf
registration objects defined frequently failed to load them correctly.
What happens is a race condition between res_pjsip pushing its reload into
an asynchronous task processor task and the thread that does the rest of
the reloads when it gets to reloading the res_pjsip_outbound_registration
module. A similar race condition happens between a reload and the CLI/AMI
show registrations commands. The reload updates the current_states
container and the CLI/AMI commands call get_registrations() which builds a
new current_states container.
* Made res_pjsip.c reload_module() use ast_sip_push_task_synchronous()
instead of ast_sip_push_task() to eliminate two threads processing config
reloads at the same time.
* Made get_registrations() not replace the global current_states container
so the CLI/AMI show registrations command cannot interfere with reloading.
You could never add/remove objects in the container without the
possibility of the container being replaced out from under you by
get_registrations().
* Added a registration loaded sorcery instance observer to purge any dead
registration objects since get_registrations() cannot do this job anymore.
The struct ast_sorcery_instance_observer callbacks must be used because
the callback happens inline with the load process. The struct
ast_sorcery_observer callbacks are pushed to a different thread.
* Added some global current_states NULL pointer checks in case the
container disappears because of unload_module().
* Made sorcery's struct ast_sorcery_instance_observer.object_type_loaded
callbacks guaranteed to be called before any struct
ast_sorcery_observer.loaded callbacks will be called.
* Moved the check for non-reloadable objects to before the sorcery
instance loading callbacks happen to short circuit unnecessary work.
Previously with non-reloadable objects, the sorcery instance
loading/loaded callbacks would always happen, the individual wizard
loading/loaded would be prevented, and the non-reloadable type logging
message would be logged for each associated wizard.
ASTERISK-24729 #close
Review: https://reviewboard.asterisk.org/r/4381/
........
Merged revisions 431243 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431251 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions it was removed until the
problem could be resolved. This patch is the original patch plus some added
locking around stasis router subcription that was needed to avoid the memory
corruption.
Description of the original problem and patch (still applicable):
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4363/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 431179 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
information on UAS sessions.
The first thing this patch fixes is UAS dialogs. Previously if a transport was
configured on an endpoint and an inbound session was created there was no guarantee
that requests sent on the dialog would use the correct transport and address
information. This has now been fixed so an explicitly configured transport
is taken into account.
The second thing this patch fixes is res_pjsip_multihomed. The res_pjsip_multihomed
module attempts to determine what transport a message should go out on and what
addressing information should go into the message itself. In a scenario where
multiple transports exist bound to the same IP address but a different port the
code would incorrectly alter the transport and change the message to the wrong
transport. This change makes the res_pjsip_multihomed module smarter so it will
only change the transport and address information in the message when it is
possible and makes sense.
ASTERISK-24615 #close
Reported by: David Justl
Review: https://reviewboard.asterisk.org/r/4331/
........
Merged revisions 430755 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions the patch is
being removed until the problem can be resolved.
........
Merged revisions 430734 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This allows for a path to be specified that has a collection of CA
certificates in it.
ASTERISK-24575 #close
Reported by cloos
Patches:
pj-ca-path-trunk.diff uploaded by cloos (License #5956)
Review: https://reviewboard.asterisk.org/r/4344
........
Merged revisions 430709 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4311/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 430628 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 430274 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This updates the documentation for the 'method' configuration option to
be more verbose about the behaviors of values 'unspecified' and
'default'. They do exactly the same thing which is to select the
default as defined by PJSIP which is currently TLSv1.
Review: https://reviewboard.asterisk.org/r/4264/
........
Merged revisions 430145 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Optimistic SRTP is the ability to enable SRTP but not have it be
a fatal requirement. If SRTP can be used it will be, if not it won't be.
This gives you a better chance of using it without having your sessions
fail when it can't be.
Encrypt all the things!
Review: https://reviewboard.asterisk.org/r/3992/
........
Merged revisions 428222 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is the Asterisk 13 version of the patch. The main difference is in the pubsub
code since it was completely refactored between Asterisk 12 and 13.
Review: https://reviewboard.asterisk.org/r/4175
........
Merged revisions 427841 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Testing has shown repeatedly that PJSIP's default behavior of switching
automatically to TCP for large messages can cause issues. The most common
issues are that devices that we are communicating with do not handle the
switch to TCP gracefully, thus causing situations such as broken calls or
broken subscriptions. Now, in order to have this behavior happen, you must
opt into it. The sample file has been updated to warn that enabling the
TCP switch behavior may cause issues for you, so use at your own risk.
........
Merged revisions 427334 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
enabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In
some circumstances (on some networks), this can cause some issues with
messages not getting sent to the correct destination - and can also cause
connections to get dropped due to quirks in pjproject deciding to
terminate TCP connections with no messages.
While fixing the routing/messaging issues is important, having a
configuration option in Asterisk that tells pjproject to not switch over
to TCP would be useful. That way, if some glitch is discovered on some
other network/site, we can at least disable the behavior until a fix is
put into place.
AFS-197 #close
Review: https://reviewboard.asterisk.org/r/4137/
........
Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427130 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
