| Age | Commit message (Collapse) | Author |
|---|
|
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
Added a new CLI command for res_pjsip that shows both global and system
configuration settings: pjsip show settings
ASTERISK-24918 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/4597/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to a break in binary compatibility with some other modules these changes
are being reverted until the issue can be resolved.
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a type=global section is not defined in pjsip.conf the global
defaults are not applied. As a result the mandatory Max-Forwards header
is not added to SIP messages for res_pjsip/chan_pjsip.
The handling of pjsip.conf type=global objects has several problems:
1) If the global object is missing the defaults are not applied.
2) If the global object is missing the default_outbound_endpoint's default
value is not returned by ast_sip_global_default_outbound_endpoint().
3) Defines are needed so default values only need to be changed in one
place.
* Added a sorcery instance observer callback to check if there were any
type=global sections loaded. If there were more than one then issue an
error message. If there were none then apply the global defaults.
* Fixed ast_sip_global_default_outbound_endpoint() to return the
documented default when no type=global object is defined.
* Made defines for the global default values.
* Increased the default_useragent[] size because SVN version strings can
get lengthy and 128 characters may not be enough.
* Fixed an off-nominal code path ref leak in global_alloc() if the string
fields fail to initialize.
* Eliminated RAII_VAR in get_global_cfg() and
ast_sip_global_default_outbound_endpoint().
ASTERISK-24807 #close
Reported by: Anatoli
Review: https://reviewboard.asterisk.org/r/4467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
connection-oriented transports.
Note that this is backport from trunk of r425825.
This change adds a module which is configurable using the keep_alive_interval setting in the
global section that will send a CRLF keep alive to all active connection-oriented transports at
the provided interval. This is useful because it can help keep connections open through NATs.
This functionality also exists within PJSIP but can not be controlled at runtime and requires
recompiling it.
Review: https://reviewboard.asterisk.org/r/4084/
ASTERISK-24644 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If the global section was not specified in pjsip.conf then the configuration
object does not exist in sorcery so when retrieving "debug" option it would
return NULL. Then the NULL result was passed to ast_false utils function
which would return false because it wasn't set to some representation of
false, thus enabling sip debug logging. Made it so if the global config object
does not exist then it will return a default of "no" for sip debugging.
(issue ASTERISK-23038)
Reported by: Rusty Newton
........
Merged revisions 407442 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a "debug" configuration option for res_pjsip that when set to "yes"
enables SIP messages to be logged. It is specified under the "system" type.
Also added an alembic script to add the option to realtime.
(closes issue ASTERISK-23038)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3148/
........
Merged revisions 407036 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Renamed, where appropriate, the configuration options for chan/res_pjsip to use
snake case (compound words separated by an underscore). For example, faxdetect
will become fax_detect, recordofffeature will become record_off_feature, etc...
Review: https://reviewboard.asterisk.org/r/3002/
........
Merged revisions 403022 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
