| Age | Commit message (Collapse) | Author |
|---|
|
res_pjsip and res_pjsip_session had circular references, preventing both
modules from shutting down.
* Move session supplement registration to res_pjsip.
* Use create internal functions for use by pjsip_message_filter.c.
ASTERISK-27306
Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b
|
|
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
|
|
The fix for the issue is broken up into three parts.
This is part one which refactors the transport state monitor code to allow
more modules to be able to monitor transports.
* Pull the management of PJPROJECT's transport state callback code from
res_pjsip_transport_management.c into res_pjsip. Now other modules can
dynamically add and remove themselves from transport monitoring without
worrying about breaking PJPROJECT's callback chain.
* Add the ability for other modules to get a callback whenever a specific
transport is shutdown.
ASTERISK-27147
Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912
|
|
This reverts commit 6492e91392b8fd394193e411c6eb64b45486093f.
The change in question was intended to prevent the need to reload in
order to update qualifies on contacts when an AOR changes. However, this
ended up causing a deadlock instead.
Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e
|
|
Prior to this change, qualifies would only update in the following
cases:
* A reload of res_pjsip.so was issued.
* A dynamic contact was re-registered after its AOR's qualify_frequency
had been changed
This does not work well if you are using realtime for your AORs. You can
update your database to have a new qualify_frequency, but the permanent
contacts on that AOR will not have their qualifies updated. And the
dynamic contacts on that AOR will not have their qualifies updated until
the next registration, which could be a long time.
This change seeks to fix this problem by making it so that whenever AOR
configuration is applied, the contacts pertaining to that AOR have their
qualifies updated.
Additions from this patch:
* AOR sorcery objects now have an apply handler that calls into a newly
added function in the OPTIONS code. This causes all contacts
associated with that AOR to re-schedule qualifies.
* When it is time to qualify a contact, the OPTIONS code checks to see
if the AOR can still be retrieved. If not, then qualification is
canceled on the contact.
Alterations from this patch:
* The registrar code no longer updates contact's qualify_frequence and
qualify_timeout. There is no point to this since those values already
get updated when the AOR changes.
* Reloading res_pjsip.so no longer calls the OPTIONS initialization
function. Reloading res_pjsip.so results in re-loading AORs, which
results in re-scheduling qualifies.
Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121
|
|
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
|
|
There are several places that do scheduled tasks or periodic housecleaning,
each with its own implementation:
* res_pjsip_keepalive has a thread that sends keepalives.
* pjsip_distributor has a thread that cleans up expired unidentified requests.
* res_pjsip_registrar_expire has a thread that cleans up expired contacts.
* res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task.
* res_pjsip_sdp_rtp also uses ast_sched to send keepalives.
There are also places where we should be doing scheduled work but aren't.
A good example are the places we have sorcery observers to start registration
or qualify. These don't work when changes are made to a backend database
without a pjsip reload. We need to check periodically.
As a first step to solving these issues, a new ast_sip_sched facility has
been created.
ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue.
When a task is ready to run, ast_sip_task_pusk is called for it. This ensures
that the task is executed in a PJLIB registered thread and doesn't hold up the
ast_sched thread so it can immediately continue processing the queue. The
serializer used by ast_sip_sched is one of your choosing or a random one from
the res_pjsip pool if you don't choose one.
Another feature is the ability to automatically clean up the task_data when the
task expires (if ever). If it's an ao2 object, it will be dereferenced, if
it's a malloc'd object it will be freed. This is selectable when the task is
scheduled. Even if you choose to not auto dereference an ao2 task data object,
the scheduler itself maintains a reference to it while the task is under it's
control. This prevents the data from disappearing out from under the task.
There are two scheduling models.
AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at
the specific interval. That is, every "interval" milliseconds, regardless of
how long the task takes. If the task takes longer than the interval, it will
be scheduled at the next available multiple of interval. For exmaple: If the
task has an interval of 60 secs and the task takes 70 secs (it better not),
the next invocation will happen at 120 seconds.
AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should
start "interval" milliseconds after the current invocation has finished.
Also, the same ast_sched facility for fixed or variable intervals exists. The
task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or
AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time.
One res_pjsip.h housekeeping change was made. The pjsip header files were
added to the top. There have been a few cases lately where I've needed
res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because
I didn't add the pjsip header files to my source even though I never referenced
any pjsip calls.
Finally, a few new convenience APIs were added to astobj2 to make things a
little easier in the scheduler. ao2_ref_and_lock() calls ao2_ref() and
ao2_lock() in one go. ao2_unlock_and_unref() does the reverse. A few macros
were also copied from res_phoneprov because I got tired of having to duplicate
the same hash, sort and compare functions over and over again. The
AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for
aor_container_alloc into your source.
This facility can be used immediately for the situations where we already have
a thread that wakes up periodically or do some scheduled work. For the
registration and qualify issues, additional sorcery and schema changes would
need to be made so that we can easily detect changed objects on a periodic
basis without having to pull the entire database back to check. I'm thinking
of a last-updated timestamp on the rows but more on this later.
Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c
|
|
Due to some ignored return values, Asterisk could crash if processing an
incoming REGISTER whose contact URI was above a certain length.
ASTERISK-25707 #close
Reported by George Joseph
Patches:
0001-res_pjsip-Validate-that-URIs-don-t-exceed-pjproject-.patch
AST-2016-004
Change-Id: I3ea7cee16f29c8088794de3085ca7523c1c4833d
|
|
Associated with ASTERISK-25131
Change-Id: Iefa3b2066cfd8b108a90d2dd4a64d92c3a195d33
|
|
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
|
|
Permanent contacts that hadn't been qualified yet were missing
their contact_status entries causing SEGVs when running CLI
commands.
This patch makes sure that contact_statuses are created for
both dynamic and permanent contacts when they are created.
It also adds checks in the CLI code to make sure there's a
contact_status, just in case.
ASTERISK-25018 #close
Reported-by: Ivan Poddubny
Tested-by: Ivan Poddubny
Tested-by: George Joseph
Change-Id: I3cc13e5cedcafb24c400368b515b02d7fb81e029
|
|
This change adds the following:
1. A query set implementation. This is an API that allows queries to be executed in parallel and once all have completed a callback is invoked.
2. Unit tests for the query set implementation.
3. An external PJSIP resolver which uses the DNS core API to do NAPTR, SRV, AAAA, and A lookups.
For the resolver it will do NAPTR, SRV, and AAAA/A lookups in parallel. If NAPTR or SRV
are available it will then do more queries. And so on. Preference is NAPTR > SRV > AAAA/A,
with IPv6 preferred over IPv4. For transport it will prefer TLS > TCP > UDP if no explicit
transport has been provided. Configured transports on the system are taken into account to
eliminate resolved addresses which have no hope of completing.
ASTERISK-24947 #close
Reported by: Joshua Colp
Change-Id: I56cb03ce4f9d3d600776f36928e0b3e379b5d71e
|
|
Added a new CLI command for res_pjsip that shows both global and system
configuration settings: pjsip show settings
ASTERISK-24918 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/4597/
........
Merged revisions 434527 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Done as a separate commit from a finding in
https://reviewboard.asterisk.org/r/4467/
........
Merged revisions 432787 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions it was removed until the
problem could be resolved. This patch is the original patch plus some added
locking around stasis router subcription that was needed to avoid the memory
corruption.
Description of the original problem and patch (still applicable):
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4363/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 431179 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the original patch causing memory corruptions the patch is
being removed until the problem can be resolved.
........
Merged revisions 430734 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4311/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 430628 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change enables DNS client support within PJSIP. System
nameservers are automatically discovered using res_init or
res_ninit. If this fails then PJSIP will resort to using
gethostbyname for resolution.
By enabling this support we gain SRV support, failover, and
weight support.
(closes issue ASTERISK-23435)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3343/
........
Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In order to retrieve an arbitrary sorcery instance from a dialplan function
(or any place else) there needs to be a registry of sorcery instances.
ast_sorcery_init now creates a hashtab as a registry.
ast_sorcery_open now checks the hashtab for an existing sorcery instance
matching the caller's module name. If it finds one, it bumps the
refcount and returns it. If not, it creates a new sorcery instance,
adds it to the hashtab, then returns it.
ast_sorcery_retrieve_by_module_name is a new function that does a hashtab
lookup by module name. It can be called by the future dialplan function.
res_pjsip/config_system needed a small change to share the main res_pjsip
sorcery instance.
tests/test_sorcery was updated to include a test for the registry.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3184/
........
Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
On some systems the values for INFINITY and NAN are not defined thus causing
a build error on those systems. Added definitions for those if they had
not previously been defined.
(closes issue ASTERISK-23056)
Reported by: capouch
Patches:
inf-nan-patch.txt uploaded by capouch (license 6564)
........
Merged revisions 406788 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Expose initial size, automatic increment, maximum size, and idle
timeout as configurable parameters for the res_pjsip thread pool.
Review: https://reviewboard.asterisk.org/r/2704/
(closes issue ASTERISK-22143)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
For chan_pjsip, this introduces CLI/AMI remote unregistration commands,
reworks CLI syntax for sending NOTIFYs, adds AMI qualification support,
and adds documentation for PJSIPNotify.
This also fixes two refcounting bugs in the outbound registration code.
Review: https://reviewboard.asterisk.org/r/2695/
(closes issue ASTERISK-21939)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
