summaryrefslogtreecommitdiff
path: root/res/res_pjsip/location.c
AgeCommit message (Collapse)Author
2014-10-01PJSIP: Handle defaults properlyKinsey Moore
This updates the code behind PJSIP configuration options with custom handlers to deal with the assigned default values properly where it makes sense and adjusting the default value where it doesn't. Before applying this patch, there were several cases where the default value for an option would prevent that config section from loading properly. Reported by: Thomas Thompson Review: https://reviewboard.asterisk.org/r/4019/ ........ Merged revisions 424263 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-09-18res_pjsip: ami: Fix error in AMI output when an endpoint has no transportGeorge Joseph
When no transport is associated to an endpoint, the AMI output for PJSIPShowEndpoint indicates an error instead of silently ignoring the missing transport. This patch causes the error to appear only if a transport was specified on the endpoint and the transport doesn't exist. It also fixes an issue with counting the objects that were actually found. ASTERISK-24161 #close ASTERISK-24331 #close Tested by: George Joseph Review: https://reviewboard.asterisk.org/r/3998/ ........ Merged revisions 423282 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-05-09Allow Asterisk to compile under GCC 4.10Kinsey Moore
This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-04-18Allow for multiple contacts to be configured in a single contact= line.Mark Michelson
This is useful for configuring multiple permanent contacts for an AOR when using realtime AORs. Review: https://reviewboard.asterisk.org/r/3462 ........ Merged revisions 412582 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-04-17res_pjsip: Handle reloading when permanent contacts exist and qualify is ↵Joshua Colp
configured. This change fixes a problem where permanent contacts being qualified were not being updated. This was caused by the permanent contacts getting a uuid and not a known identifier, causing an inability to look them up when updating in the qualify code. A bug also existed where the new configuration may not be available immediately when updating qualifies. (closes issue ASTERISK-23514) Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/3448/ ........ Merged revisions 412551 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-04-15Remove unused RAII_VAR() declarations.Richard Mudgett
* Remove unused RAII_VAR() declarations. The compiler cannot catch these because the cleanup function "references" the unused variable. Some actually allocated and released resources that were never used. * Fixed some whitespace issues in stasis_bridges.c. ........ Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-03-08pjsip_cli: Create pjsip show channel and contact, and general cli code cleanup.George Joseph
Created the 'pjsip show channel' and 'pjsip show contact' commands. Refactored out the hated ast_hashtab. Replaced with ao2_container. Cleaned up function naming. Internal only, no public name changes. Cleaned up whitespace and brace formatting in cli code. Changed some NULL checking from "if"s to ast_asserts. Fixed some register/unregister ordering to reduce deadlock potential. Fixed ast_sip_location_add_contact where the 'name' buffer was too short. Fixed some self-assignment issues in res_pjsip_outbound_registration. (closes issue ASTERISK-23276) Review: http://reviewboard.asterisk.org/r/3283/ ........ Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-03-06sorcery: Create AST_SORCERY dialplan function.George Joseph
This patch creates the AST_SORCERY dialplan function which allows someone to retrieve any value from a sorcery-based config file. It's similar to AST_CONFIG. The creation of the function itself was fairly straightforward but it required changes to the underlying sorcery infrastructure that rippled into individual sorcery objects. The changes stemmed from inconsistencies in how sorcery created ast_variable objectsets from sorcery objects and the inconsistency in how individual objects used that feature especially when it came to parameters that can be specified multiple times like contact in aor and match in identify. You can read more here... http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html So, what this patch does, besides actually creating the AST_SORCERY function, is the following... * Creates ast_variable_list_append which is a helper to append one ast_variable list to another. * Modifies the ast_sorcery_object_field_register functions to accept the already-defined sorcery_fields_handler callback. * Modifies ast_sorcery_objectset_create to accept a parameter indicating return type preference...a single ast_variable with all values concatenated or an ast_variable list with multiple entries. Also fixed a few bugs. * Modifies individual sorcery object implementations to use the new function definition of the ast_sorcery_object_field_register functions. * Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement sorcery_fields_handler handlers so they return multiple occurrences as an ast_variable_list. * Added a whole bunch of tests to test_sorcery. (closes issue ASTERISK-22537) Review: http://reviewboard.asterisk.org/r/3254/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-02-20pjsip_cli: Add pjsip commands 'show registrations' and 'show contacts'.George Joseph
Added 'show registrations' and 'show contacts' to pjsip cli to make things a little more consistent. The output is exactly the same as the list command. Just needed to add entries to their respective ast_cli_entry structures. (closes issue ASTERISK-23275) Review: http://reviewboard.asterisk.org/r/3210/ ........ Merged revisions 408522 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-02-17Store SIP User-Agent information in contacts.Mark Michelson
When an endpoint sends a REGISTER request to Asterisk, we now will associate the User-Agent header with all contacts that were bound in that REGISTER request. ........ Merged revisions 408270 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-02-13Fix crash in AMI PJSIPShowEndpoint action.Mark Michelson
If an AOR has no permanent contacts, then the permanent_contacts container is never allocated. This makes the code safe in the face of NULLs. I also changed the variable that counts contacts from "num" to "total_contacts" since there are now two variables that are indicate numbers of things. ........ Merged revisions 407988 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-02-06res_pjsip: Updates and adds more PJSIP CLI commands.Richard Mudgett
* Adds identify, transport, and registration support to the PJSIP CLI. * Creates three additional callbacks, one for an iterator, one for a comparator, and one for a container. This eliminates the link dependency from higher level modules to lower level ones. * Eliminates duplicate sorting in PJSIP CLI commands. * Cleans up PJSIP CLI output formatting. * Pushes CLI command registration down to the implementing source file. * Adds several ast_sip_destroy_sorcery functions to complement existing ast_sip_sorcery_initialize functions. The destroy functions unregister PJSIP CLI commands and PJSIP CLI formatters. Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/3104/ ........ Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-01-15PJSIP: Add Path header supportKinsey Moore
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal additions in res_pjsip_registrar.c to store the path and additions in res_pjsip_outbound_registration.c to enable advertisement of path support to registrars and intervening proxies. Path information is stored on contacts and is enabled via Address of Record (AoRs) and Registration configuration sections. While adding path support, it became necessary to be able to add SIP supplements that handled messages outside of sessions, so a framework for handling these types of hooks was added in parallel to the already-existing session supplements and several senders of out-of-dialog requests were refactored as a result. (closes issue ASTERISK-21084) Review: https://reviewboard.asterisk.org/r/3050/ ........ Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-01-03res_pjsip: Ensure more URI validation happens in pj threads.Joshua Colp
........ Merged revisions 404737 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-12-20res_pjsip: Add PJSIP CLI commandsMatthew Jordan
Implements the following cli commands: pjsip list aors pjsip list auths pjsip list channels pjsip list contacts pjsip list endpoints pjsip show aor(s) pjsip show auth(s) pjsip show channels pjsip show endpoint(s) Also... Minor modifications made to the AMI command implementations to facilitate reuse. New function ast_variable_list_sort added to config.c and config.h to implement variable list sorting. (issue ASTERISK-22610) patches: pjsip_cli_v2.patch uploaded by george.joseph (License 6322) ........ Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-12-20ao2_iterator: Mini-audit of the ao2_iterator loops in the new code files.Richard Mudgett
* Fixed several places where ao2_iterator_destroy() was not called. * Fixed several iterator loop object variable reference problems. * Fixed res_parking AMI actions returning non-zero. Only the AMI logoff action can return non-zero. Review: https://reviewboard.asterisk.org/r/3087/ ........ Merged revisions 404434 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-12-14res_pjsip: Apply outbound proxy to all SIP requests.Joshua Colp
Objects which are involved in SIP request creation and sending now allow an outbound proxy to be specified. For cases where an endpoint is used the outbound proxy specified there will be applied. (closes issue ASTERISK-22673) Reported by: Antti Yrjola Review: https://reviewboard.asterisk.org/r/3022/ ........ Merged revisions 403811 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-12-01res_pjsip_transport_websocket: Fix security events and simplify implementation.Joshua Colp
Transport type determination for security events has been simplified to use the type present on the message itself instead of searching through configured transports to find the transport used. The actual WebSocket transport has also been simplified. It now leverages the existing PJSIP transport manager for finding the active WebSocket transport for outgoing messages. This removes the need for res_pjsip_transport_websocket to store a mapping itself. (closes issue ASTERISK-22897) Reported by: Max E. Reyes Vera J. Review: https://reviewboard.asterisk.org/r/3036/ ........ Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-11-23res_pjsip: AMI commands and events.Kevin Harwell
Created the following AMI commands and corresponding events for res_pjsip: PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few select attributes on each. Events: EndpointList - for each endpoint a few attributes. EndpointlistComplete - after all endpoints have been listed. PJSIPShowEndpoint - Provides a detail list of attributes for a specified endpoint. Events: EndpointDetail - attributes on an endpoint. AorDetail - raised for each AOR on an endpoint. AuthDetail - raised for each associated inbound and outbound auth TransportDetail - transport attributes. IdentifyDetail - attributes for the identify object associated with the endpoint. EndpointDetailComplete - last event raised after all detail events. PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound registrations. Events: InboundRegistrationDetail - inbound registration attributes for each registration. InboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound registrations. Events: OutboundRegistrationDetail - outbound registration attributes for each registration. OutboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. (issue ASTERISK-22609) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2959/ ........ Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-10-10Perform validation of permanent contacts on AORs in res_pjsip.Joshua Colp
........ Merged revisions 400833 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-07-30The large GULP->PJSIP renaming effort.Mark Michelson
The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*" * All files that were "res_sip*" are now "res_pjsip*" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-10 21:19:26 +0000