Age | Commit message (Collapse) | Author |
|
|
|
|
|
Support for these protocols was added in the same commit as the 'proto'
field, so we can safely use the same ./configure check.
For reference: https://trac.pjsip.org/repos/changeset/4968
Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
|
|
|
|
Use the new ast_cli_completion_add() function to improve completion
performance for commands like 'pjsip show endpoint.'
Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
|
|
Change-Id: I25348c386a222bb704aff07f54375108a6402906
|
|
For both dynamic and static contacts it was possible that potential AOR
changes were not being applied to all contacts. This was because the qualify
and schedule code was only retrieving AOR's, and contacts with frequencies
greater than zero.
For instance the following could happen: and AOR/contact has a frequency of 5,
it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are
stopped, a list of AOR's is retrieved with frequency > 0, but none are
selected since in this scenario all are 0. The contact for the one previously
set to 5 though does not get updated, so it's status remains "AVAILABLE".
This patch makes it so all contacts (static and dynamic) are selected, and
appropriately updated if need be.
ASTERISK-27467 #close
Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
|
|
Dynamic contacts were not being properly updated on reload. As a matter of
fact any changes to the AOR that a dynamic contact was associated with were
not being applied.
On reload, this patch makes it so for each dynamic contact, the associated
AOR is now retrieved and the AOR's fields are applied to the contact.
ASTERISK-27467
Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
|
|
The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value. This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object(). i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.
Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935
|
|
|
|
Mac doesn't like the comparison of -1 to an enum, so store the result of
ast_sip_str_to_dtmf to an int so we can check for the negative return
value. ast_sip_str_to_dtmf returns an int so this is only delaying the
implicit type cast.
Change-Id: I0c262c1719ee951aae1f437d733a301cf5f8ad29
|
|
This improves performance for registrations assuming that
res_config_astdb is not in use.
Change-Id: I86f37aa9ef07a4fe63448cb881bbadd996834bb1
|
|
|
|
|
|
Asterisk will crash if contact uri is invalid, so contact_apply_handler
should check if the uri is NULL or empty.
ASTERISK-27393 #close
Reported-by: Aaron An
Tested-by: AaronAn
Change-Id: Ia0309bdc6b697c73c9c736e1caec910b77ca69f5
|
|
Change-Id: Ib0fc7a18f3135ca8990c3984c9e15f6d26e556e8
|
|
When using realtime, fields that are not explicitly set by an
administrator are still presented to sorcery as empty strings. Handle
this case explicitly.
In this particular case, if any of these fields are required for TLS
support, their existence should be validated in the 'apply' handler once
we have a complete transport definition.
ASTERISK-27032 #close
Reported by: seanchann.zhou
Change-Id: Ie3b5fb421977ccdb33e415d4ec52c3fd192601b7
|
|
|
|
Fixes a regression where some characters were unable to be used in
the from_user field of an endpoint. Additionally, the backtick was
removed from the list of valid characters, since it is not valid,
and it was replaced with a single quote, which is a valid character.
ASTERISK-27387
Change-Id: Id80c10a644508365c87b3182e99ea49da11b0281
|
|
Change-Id: Ie083987e69dc43b6861671c218cacacc11b2072f
|
|
When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
|
|
|
|
res_pjsip and res_pjsip_session had circular references, preventing both
modules from shutting down.
* Move session supplement registration to res_pjsip.
* Use create internal functions for use by pjsip_message_filter.c.
ASTERISK-27306
Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b
|
|
Do not manually call sip_endpoint_apply_handler from load_all_endpoints.
This is not necessary and causes memory leaks.
Additionally reinitialize persistent->aors when we reuse a persistent
object with a new endpoint.
ASTERISK-27306
Change-Id: I59bbfc8da8a14d5f4af8c5bb1e71f8592ae823eb
|
|
pjsip_distributor leaks references to fake_auth when the default realm
has not changed.
ASTERISK-27306
Change-Id: I3fcf103b3680ad2d1d4610dcd6738eeaebf4d202
|
|
The "res_pjsip: Filter out non SIP(S) requests" commit moved the
filtering of messages to pjproject's PJSIP_MOD_PRIORITY_TRANSPORT_LAYER
in order to filter out incoming bad uri schemes as early as possible.
Since the change affected outgoing messages as well and the TRANSPORT
layer is the last to be run on outgoing messages, we were overwriting
the setting of external_signaling_address (which is set earlier by
res_pjsip_nat) with an internal address.
* pjsip_message_filter now registers itself as a pjproject module
twice. Once in the TSX layer for the outgoing messages (as it was
originally), then a second time in the TRANSPORT layer for the
incoming messages to catch the invalid uri schemes.
ASTERISK-27295
Reported by: Sean Bright
Change-Id: I2c90190c43370f8a9d1c4693a19fd65840689c8c
|
|
|
|
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
|
|
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
|
|
In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
confusion about whether the transport_state->localnet ACL has ALLOW or
DENY semantics.
For the record: the localnet has DENY semantics, meaning that "not in
the list" means ALLOW, and the local nets are in the list.
Therefore, checks like this look wrong, but are right:
/* See if where we are sending this request is local or not, and if
not that we can get a Contact URI to modify */
if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
ast_debug(5, "Request is being sent to local address, "
"skipping NAT manipulation\n");
(In the list == localnet == DENY == skip NAT manipulation.)
And conversely, other checks that looked right, were wrong.
This change adds two macro's to reduce the confusion and uses those
instead:
ast_sip_transport_is_nonlocal(transport_state, addr)
ast_sip_transport_is_local(transport_state, addr)
ASTERISK-27248 #close
Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934
|
|
sanitize_tdata was assuming all URIs were SIP URIs so when a non
SIP uri was in the From, To or Contact headers, the unconditional
cast of a non-pjsip_sip_uri structure to pjsip_sip_uri caused
a segfault when trying to access uri->other_param.
* Added PJSIP_URI_SCHEME_IS_SIP(uri) || PJSIP_URI_SCHEME_IS_SIPS(uri)
checks before attempting to cast or use the returned uri.
ASTERISK-27152
Reported-by: Ross Beer
Change-Id: Id380df790e6622c8058a96035f8b8f4aa0b8551f
|
|
* Check that the contact's reg_server matches the host's name before
deleting any prune_on_boot contacts. We don't want to delete reliable
transport contacts made with other servers if the ps_contacts database
table is shared with other servers.
Thanks to Ross Beer for pointing out that the original prune logic would
delete reliable transport contacts from other servers.
ASTERISK-27147
Change-Id: I8e439d0d1c266ffdfd7b73d1e5e466180a689bd0
|
|
The fix for the issue is broken up into three parts.
This is part two which handles the server side of REGISTER requests when
rewrite_contact is enabled. Any registered reliable transport contact
becomes invalid when the transport connection becomes disconnected.
* Monitor the rewrite_contact's reliable transport REGISTER contact for
shutdown. If it is shutdown then the contact must be removed because it
is no longer valid. Otherwise, when the client attempts to re-REGISTER it
may be blocked because the invalid contact is there. Also if we try to
send a call to the endpoint using the invalid contact then the endpoint is
not likely to see the request. The endpoint either won't be listening on
that port for new connections or a NAT/firewall will block it.
* Prune any rewrite_contact's registered reliable transport contacts on
boot. The reliable transport no longer exists so the contact is invalid.
* Websockets always rewrite the REGISTER contact address and the transport
needs to be monitored for shutdown.
* Made the websocket transport set a unique name since that is what we use
as the ao2 container key. Otherwise, we would not know which transport we
find when one of them shuts down. The names are also used for PJPROJECT
debug logging.
* Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state
event. Now the global keep_alive_interval option, initially idle shutdown
timer, and the server REGISTER contact monitor can work on wetsocket
transports.
* Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction.
Now initially idle websockets will automatically shutdown.
ASTERISK-27147
Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4
|
|
The fix for the issue is broken up into three parts.
This is part one which refactors the transport state monitor code to allow
more modules to be able to monitor transports.
* Pull the management of PJPROJECT's transport state callback code from
res_pjsip_transport_management.c into res_pjsip. Now other modules can
dynamically add and remove themselves from transport monitoring without
worrying about breaking PJPROJECT's callback chain.
* Add the ability for other modules to get a callback whenever a specific
transport is shutdown.
ASTERISK-27147
Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912
|
|
This change fixes PIDF content generation when the underlying device
state is considered in use. Previously it was incorrectly marked
as closed meaning they were offline/unavailable. The code now
correctly marks them as open.
Additionally:
* Generate an XML element for our activity instead of a using a text
node.
* Consider every extension state other than "unavailable" to be 'open'
status.
* Update the XML namespaces and structure to reflect those
documented in RFC 4480
* Use 'on-the-phone' (defined in RFC 4880) instead of 'busy' as the
"in use" activity. This change results in eyeBeam using the
appropriate icon for the watched user.
This was tested on eyeBeam 1.5.20.2 build 59030 on Windows.
ASTERISK-26659 #close
Reported by: Abraham Liebsch
patches:
ASTERISK-26659.diff submitted by snuffy (license 5024)
Change-Id: I6e5ad450f91106029fb30517b8c0ea0c2058c810
|
|
The "external_media_address" option on transports is now
resolved using dnsmgr. This allows it to be automatically
refreshed regularly if refreshes are enabled in dnsmgr.
If the system is using a dynamic IP address a dynamic DNS
hostname can be provided to keep the IP address up to
date.
Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2
|
|
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
|
|
If the from_user field contains certain characters (like @, {, ^, etc.),
PJSIP will return a null value for the URI when attempting to parse it.
This causes a crash when trying to dial out through a trunk that contains
these invalid characters in its from_user field.
This change checks the configuration and ensures that an endpoint will
not be created if the from_user contains an invalid character. It also
adds a null check to the PJSIP URI parsing as a backup.
ASTERISK-27036 #close
Reported by: Maxim Vasilev
Change-Id: I0396fdb5080604e0bdf1277464d5c8a85db913d0
|
|
|
|
When a SIP message comes in on a transport, pjproject obtains the lock on
the transport and pulls the data out of the socket. Unlike UDP, the TCP
transport does not allow concurrent access. Without concurrency the
transport lock is not released when the transport's message complete
callback is called. The processing continues and eventually Asterisk
starts processing the SIP message. The first thing Asterisk tries to do
is determine the associated dialog of the message to determine the
associated serializer. To get the associated serializer safely requires
us to get the dialog lock.
To send a request or response message for a dialog, pjproject obtains the
dialog lock and then obtains the transport lock. Deadlock can result
because of the opposite order the locks are obtained.
* Fix the deadlock by obtaining the serializer associated with the dialog
another way that doesn't involve obtaining the dialog lock. In this case,
we use an ao2 container to hold the associated endpoint and serializer.
The new locks are held a brief time and won't overlap other existing lock
times.
ASTERISK-27090 #close
Change-Id: I9ed63f4da9649e9db6ed4be29c360968917a89bd
|
|
The OBJ_SEARCH_xxx defines should not be used as if they were individual
bits. They represent a multi-bit enumeration value field.
Change-Id: I32abc9a475396dab02402a7014357dd94284e17b
|
|
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
|
|
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
|
|
it." into 13
|
|
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
|
|
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
|
|
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
|
|
Change-Id: I4b6e1b0070563eeaee223cb58326f1b962ed5bc1
|
|
We were leaking a transport ref in multihomed_on_rx_message() which
resulted in the FRACK about excessive ref counts.
ASTERISK-26916 #close
Change-Id: I7a96658a9614a060565bb9ad51cb1c9c11ee145f
|
|
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
|