| Age | Commit message (Collapse) | Author |
|---|
|
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
|
|
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
|
|
The inbound authentication object is supposed to be immutable when it is
stored in sorcery. However, the immutable property is violated if the
authentication object does not have a realm set.
The immutable contract violation has a different effect depending upon
what sorcery back end is used. If it is the config file back end you
would get the same object back until res_pjsip is reloaded. If it is the
real-time or AstDB back end you would get a new object on each query. If
it is cached you would get the same object back until it is refreshed from
the database.
Once an inbound authentication object has its realm set it may or may not
get updated again if the default_realm changes.
If the same authentication object is used for inbound and outbound
authentication then the immutable violation can make it very hard to
determine why the outbound authentication now fails. The only diagnostic
message is a complaint about no realms matching when it had worked
earlier. It fails because of the difference in behaviour for an empty
realm setting between inbound and outbound authentication objects.
* Fixed the sorcery object immutable violation by creating a new object
and setting the default_realm on it instead. The new object is a shallow
copy for speed.
* The auth_store thread storage no longer holds an auth ref. It
interferes with the shallow copy and never needed a ref anyway.
ASTERISK-26799 #close
Change-Id: I2328a52f61b78ed5fbba38180b7f183ee7e08956
|
|
From the issue reporter:
"res_pjsip_outbound_authenticator_digest builds a nonce that is a hash of
the timestamp, the source address, the source port, a server UUID that is
calculated at startup, and the authentication realm.
Rather than caching nonces that we create, we instead attempt to re-calculate
the nonce when receiving an incoming request with authentication. We then
compare the re-calculated nonce to the incoming nonce, and if they don't match,
then authentication has failed early.
The problem is that it is possible, especially when using TCP, to receive two
requests from the same endpoint but have differing source ports for those
requests. Asterisk itself commonly will use different source ports for
outbound TCP requests."
This patch removes the source port dependency when building the nonce.
ASTERISK-25978 #close
Change-Id: I871b5f4adce102df1c4988066283095ec509dffe
|
|
The res_pjsip_authenticator_digest, res_pjsip_endpoint_identifier_*
and res_pjsip_registrar modules should load ASAP
to avoid "No matching endpoint found" for legitimate endpoint.
ASTERISK-25994
Change-Id: Iac95d95ad031e0be104189d29e923a2ad7c24a1b
|
|
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
|
|
Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
|
|
This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub
have loaded properly before attempting to load any modules that depend
on them since the module loader system is not currently capable of
resolving module dependencies on its own.
ASTERISK-24312 #close
Reported by: Dafi Ni
Review: https://reviewboard.asterisk.org/r/4062/
........
Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425691 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Replace code using ast_uuid_generate() with simpler and faster code using
ast_uuid_generate_str(). The new code avoids a malloc(), free(), and
copy.
........
Merged revisions 424103 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424105 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
"module show" .
ASTERISK-23919 #close
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/3802
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
An md5 hash is 32 bytes long. The char buffer must be at least 33 bytes to
avoid clobbering of the stack. This patch also fixes a potential clobbering
in test_utils.c.
Thanks to Andrew Nagy for reporting and testing this out in #asterisk-dev
Reported by: Andrew Nagy
Tested by: Andrew Nagy
........
Merged revisions 404843 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When switching to using a vector for authentication, I initialized
the vector for the artificial endpoint to be of size 1. However, this
does not result in AST_VECTOR_SIZE() returning 1 since there isn't
actually anything in the vector.
Rather than trifle with the vector by putting unnecessary elements in,
I simply changed the callback in res_pjsip_authenticator_digest.c to
explicitly report that the artificial endpoint requires authentication.
Thanks to Joshua Colp for pointing this out.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Since Asterisk has a vector API now, places where arrays are manually
resized don't really make sense any more. Since the auth work in PJSIP
was freshly-written, it was easy to reform it to use a vector.
Review: https://reviewboard.asterisk.org/r/3044
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Previously, regardless of whether failure to authenticate was due to
lacking any authentication or actually failing authentication, the
Digest Authenticator would simply return that a challenge was still
needed. It will continue to do that when no authentication information
is in the received SIP digest, but when authentication information
is present and does not pass authentication, that will be treated as
an authentication error. This is to ensure that PJSIP will issue
security events indicated failed auths.
........
Merged revisions 402537 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
With this change, if no realm is specified in an outbound auth
section, then we will simply match the realm that was present
in the 401/407 challenge.
(closes issue ASTERISK-22471)
Reported by George Joseph
(closes issue ASTERISK-22386)
Reported by Rusty Newton
Patches:
outbound_auth_realm_v4.patch uploaded by George Joseph (License #6322)
........
Merged revisions 399059 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
