| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d
|
|
This adds menuselect dependencies for modules that use symbols of other
modules.
ASTERISK-27390
Change-Id: Ia2d2849f5b87a72af7324a82edc3f283eafb5385
|
|
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
|
|
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
|
|
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
|
|
|
|
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
|
|
When PJPROJECT needs to do a DNS resolution and there is not a cached
entry available, the SIP request message goes out on the PJSIP monitor
thread instead of the original serializer thread. Thus when the response
comes back it does not get processed by the original sending serializer.
This patch records the serializer on tdata before passing a request
message to PJPROJECT where it can in Asterisk code. There are several
places in PJPROJECT for outbound registration and publishing support that
would need to record the serializer. Unfortunately, without replacing the
PJPROJECT DNS resolver as was done in v14 we cannot fix those without
modifying PJPROJECT.
Even if we backported the DNS resolver from v14, the outbound registration
refresh timer does not go out on a serializer thread but the PJSIP monitor
thread. Fortunately, Asterisk's outbound publish support doesn't use the
auto refresh timer that would also not go out under the serializer thread.
This patch is v13 only.
ASTERISK-26669
ASTERISK-26738
Change-Id: I9997b9ed6dbcebd2c37d6a67dc6dcee9c78914a4
|
|
This change replaces the custom unload process for the outbound
publish module with the common serializer shutdown group.
ASTERISK-25217 #close
Change-Id: I280a0384d860c486202d87d2d674394cca77ffb6
|
|
again" into 13
|
|
into 13
|
|
reloads/realtime fetches" into 13
|
|
into 13
|
|
When reloading, or fetching realtime data, if the "apply" failed for any
numerous reasons the current state object would not be maintained. This
potentially resulted in publishes being stopped for some states/clients when
they should not have been.
This patch makes it so the current state object is kept upon any type of reload/
fetch failures.
Change-Id: Iab6020c116d628ed2ae81183e987e2eaa3c90b30
|
|
It was possible for the explicit publish destroy function to be called without
the pjsip client ever being initialized. This fix checks to make sure there is
a client to destroy before attempting.
Change-Id: I8eea1bfa3bd472149bfc255310be2a6248688f5c
|
|
The same thing was happening in res_pjsip_publish_asterisk. When the library
was unloaded it did not unregister the object type from sorcery. Subsequent
loads resulted in a failed load due to the sorcery type already existing.
Change-Id: Ifdc25e94e4cd40bc5a19eb4d0a00b86c2e9fedc9
|
|
There were a few spots where the client object's reference was being leaked in
sip_outbound_publish_callback. This patch cleans up those leaks.
Change-Id: I485d0bc9335090f373026f77c548042e258461df
|
|
When res_pjsip_outbound_publish unloads it has to wait for all current
publishing objects to get done. However if the wait condition times out
then it does not fail the unload. This sometimes results in an infinite
loop check while unloading. This patch now fails the unload operation if
the condition times out.
Change-Id: Id57b8cbed9d61222690fcba1e4f18e259df4c7ec
|
|
Change-Id: I0da80a3c3e0eae0c52ff27e7412ba027d6f52353
|
|
The first available transport of the appropriate type is used now.
This patch adds new config option 'transport' for outbound-publish.
If transport is set then outbound PUBLISH requests will use this transport.
ASTERISK-25901 #close
Change-Id: Ib389130489b70e36795b0003fa5fd386e2680151
|
|
When Asterisk receives a 412 (Conditional Request Failed) response
it has to recreate publish session.
There is bug in res_pjsip_outbound_publish.c
The function sip_outbound_publish_client_alloc is called with wrong object
while processing 412 (Conditional Request Failed) response.
This patch fixes it.
ASTERISK-25229 #close
Change-Id: I3b62f2debf6bb1e5817cde7b13ea39ef2bf14359
|
|
When Asterisk attempts to send SIP outbound publish information and no response
is ever received (no 200 okay, 412, 423) the system eventually crashes. A
response is never received because the system Asterisk is attempting to send
publish information to is not available. The underlying pjsip framework attempts
to send publish information. After several attempts it calls back into the
Asterisk outbound publish code. At this point if the "client->queue" is empty
Asterisk attempts to schedule a refresh which utilizes "rdata" and since no
response was received the given "rdata" struture is NULL. Attempting to
dereference a NULL object of course results in a crash.
The fix here removes the dependency on rdata for schedule_publish_refresh.
Instead param->expiration is now passed to it as this is set to -1 if no
response is received. Also added a notification when no response is received.
ASTERISK-24635 #close
Reported by: Marco Paland
Review: https://reviewboard.asterisk.org/r/4384/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The code was missing the case for explicitly destroying an outbound publication
when Asterisk had never actually published anything. The result was that Asterisk
would hang for a while on a graceful shutdown.
With this change, the case is taken into account, and on a graceful shutdown, these
publications are destroyed without the need to actually send a PUBLISH request.
ASTERISK-24655 #close
Reported by Kevin Harwell
Review: https://reviewboard.asterisk.org/r/4325
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
res_pjsip_outbound_publish was missing the CHECK_PJSIP_MODULE_LOADED()
call in load_module, and would crash with a segfault if res_pjsip
declined to load.
Review: https://reviewboard.asterisk.org/r/4258/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When using a non-default sorcery wizard (in this instance realtime) for outbound
publishes Asterisk will crash after a stack overflow occurs due to the code
infinitely recursing. The fix entails removing the outbound publish state
dependency from the outbound publish sorcery object and instead keeping an in
memory container that can be used to lookup the state when needed.
ASTERISK-24514 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4178/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This module implements the core parts required for doing outbound PUBLISH.
It takes care of configuration, lifetime management, and authentication.
Additional modules implement the specific events that are published.
Review: https://reviewboard.asterisk.org/r/3780/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
