| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I1f9adb911f23376503396ec8867e8005b755eb94
|
|
The named aor lock was always being locked for writes so a rwlock adds no
benefit and may be slower because rwlocks are biased toward read locking.
Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28
|
|
Contact expiration can occur in several places: res_pjsip_registrar,
res_pjsip_registrar_expire, and automatically when anyone calls
ast_sip_location_retrieve_aor_contact. At the same time, res_pjsip_registrar
may also be attempting to renew or add a contact. Since none of this was locked
it was possible for one thread to be renewing a contact and another thread to
expire it immediately because it was working off of stale data. This was the
casue of intermittent registration/inbound/nominal/multiple_contacts test
failures.
Now, the new named lock functionality is used to lock the aor during contact
expire and add operations and res_pjsip_registrar_expire now checks the
expiration with the lock held before deleting the contact.
ASTERISK-25885 #close
Reported-by: Josh Colp
Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059
|
|
When shutting down, the PJSIP sorcery is destroyed. The registrar
expiration module queries the PJSIP sorcery to determine what
to expire. As there was no synchronization between termination
of the expiration thread and the unloading of the module it was
possible for the thread to try to access the PJSIP sorcery after
it had been destroyed.
This change ensures that the thread is shut down before allowing
the module to be considered unloaded.
Change-Id: I69fd239edbaaf160c2d37ae00d3ac06e5596fe8b
|
|
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
|
|
Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
|
|
eliminated some RAII_VAR() usage.
* Converted the contact_autoexpire container to use the ao2 template hash
and cmp functions. Also made use the OBJ_SEARCH_xxx names instead of the
deprecated names.
* Eliminates several unnecessary uses of RAII_VAR().
Review: https://reviewboard.asterisk.org/r/4524/
........
Merged revisions 433622 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Contact expiration object refs were leaked when the module was unloaded.
* Made empty the scheduler of entries before destroying it to release the
object ref held by the scheduler entry.
Review: https://reviewboard.asterisk.org/r/4523/
........
Merged revisions 433596 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub
have loaded properly before attempting to load any modules that depend
on them since the module loader system is not currently capable of
resolving module dependencies on its own.
ASTERISK-24312 #close
Reported by: Dafi Ni
Review: https://reviewboard.asterisk.org/r/4062/
........
Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425691 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
"module show" .
ASTERISK-23919 #close
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/3802
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
