| Age | Commit message (Collapse) | Author |
|---|
|
In handle_negotiated_sdp(), use session->active_media_state when
session->pending_media_state is empty. The 200's SDP should be fed into
handle_negotiated_sdp_session_media() together with the already negotiated
state, which is now in session->active_media_state instead. Only if both
the session's pending and active media are empty should
handle_negotiated_sdp() abort.
ASTERISK-27441
Change-Id: If0d5150ffe6f38d8a854831fef37942258d4629c
|
|
pjsip_distributor:
authenticate() creates a tdata and uses it to send a challenge or
failure response. When pjsip_endpt_send_response2() succeeds, it
automatically decrements the tdata ref count but when it fails, it
doesn't. Since we weren't checking for a return status, we weren't
decrementing the count ourselves on error and were therefore leaking
tdatas.
res_pjsip_session:
session_reinvite_on_rx_request wasn't decrementing the ref count
if an error happened while sending a 491 response.
pre_session_setup wasn't decrementing the ref count if
while sending an error after a pjsip_inv_verify_request failure.
res_pjsip:
ast_sip_send_response wasn't decrementing the ref count on error.
ASTERISK-27618
Reported By: Sandro Gauci
Change-Id: Iab33a6c7b6fba96148ed465b690ba8534ac961bf
|
|
pjproject does not have a function to reverse pjsip_inv_usage_init.
This means we need to ignore any calls to the functions once shutdown is
final.
ASTERISK-27571 #close
Change-Id: Ia550fcba563e2328f03162d79fb185f16b7c9b9d
|
|
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
|
|
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
|
|
Some WebRTC clients can't handle renegotiation with the addition of
streams that include an offer to bundle. They instead expect the
newly added streams to already be bundled. This change does such a thing
if WebRTC support is enabled on an endpoint.
ASTERISK-27566
Change-Id: I7fe9b7ac35a2798627d9c2c8369129f407af6461
|
|
The pjsip_msg_find_hdr function can return NULL. This patch adds a check
when searching for the sequence header to make sure a NULL pointer is never
de-referenced.
Change-Id: I19af23aeeded65be016be92360e8cb7ffe51fad2
|
|
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
|
|
requested."
|
|
When a connected line update is sent to an endpoint we do not request
a specific stream topology to be used. Previously this resulted in the
configured stream topology being used which may actually differ from the
currently negotiated topology. PJSIP is helpful in this regard in that
it will fill in any missing streams with removed ones. This results in
our own state not matching the SDP, though, and we do not apply the
negotiated SDP.
This change tweaks the code to use the actively negotiated stream
topology if it is present with a fallback to the configured one. This
results in the SDP and the state having matching information and the
world is happy.
ASTERISK*27397
Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604
|
|
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
|
|
|
|
|
|
A previous commit made it so when an invite session transitioned into a
disconnected state destruction of the Asterisk pjsip session object was
postponed until either a transport error occurred or the event timer
expired. However, if a call was rejected (for instance a 488) before the
session was fully established the event timer may not have been initiated,
or it was canceled without triggering either of the session finalizing states
mentioned above.
Really the only time destruction of the session should be delayed is when a
BYE is being transacted. This is because it's possible in some cases for the
session to be disconnected, but the BYE is still transacting.
This patch makes it so the session object always gets released (no more
memory leak) when the pjsip session is in a disconnected state. Except when
the method is a BYE. Then it waits until a transport error occurs or an event
timeout.
ASTERISK-27345 #close
Reported by: Corey Farrell
Change-Id: I1e724737b758c20ac76d19d3611e3d2876ae10ed
|
|
* Pre-initialize cloned media state vectors to final size to ensure
vector errors cannot happen later in the clone initialization.
* Release session_media on vector replace failure in
ast_sip_session_media_state_add.
* Release clone and media_state in ast_sip_session_refresh if we fail to
append to the stream topology, return an error.
Change-Id: Ib5ffc9b198683fa7e9bf166d74d30c1334c23acb
|
|
Free memory and return error if ast_stream_topology_set_stream fails.
Change-Id: I9f4dbf44bed627243d2f1dd8aea2eab6c38a028d
|
|
In WebRTC streams (or media tracks in their world) can be grouped
together using the mslabel. This informs the browser that each
should be synchronized with each other.
This change extends the stream API so this information can
be stored with streams. The PJSIP support has been extended
to use the mslabel to determine grouped streams and store
this association on the streams. Finally when creating the
SDP the group information is used to cause each media stream
to use the same mslabel.
ASTERISK-27379
Change-Id: Id6299aa031efe46254edbdc7973c534d54d641ad
|
|
PJSIP allows a domain name as external_media_address. This allows chan_pjsip to
be used behind a NAT with changing IP addresses. The IP address of that domain
is resolved to the c= line already. This change sets also the o= line to that
domain.
ASTERISK-27341 #close
Change-Id: I690163b6e762042ec38b3995aa5c9bea909d8ec4
|
|
Move ast_sip_add_usereqphone to be called after anonymization of URIs,
to prevent the user_eq_phone adding "user=phone" to URIs containing a
username that is not a phonenumber (RFC3261 19.1.1). An extra call to
ast_sip_add_usereqphone on the saved version before anonymization is
added to add user=phone" to the PAI.
ASTERISK-27047 #close
Change-Id: Ie5644bc66341b86dc08b1f7442210de2e6acdec6
|
|
|
|
ASTERISK-27306
Change-Id: I2c8d3fc148f9f53715c958314e1146f9611741f3
|
|
res_pjsip and res_pjsip_session had circular references, preventing both
modules from shutting down.
* Move session supplement registration to res_pjsip.
* Use create internal functions for use by pjsip_message_filter.c.
ASTERISK-27306
Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b
|
|
|
|
|
|
For some scenarios when an outgoing call was made only a subset of the
configured codecs were offered. If the codecs being offered happened to
not have a codec supported by the phone then the call would fail.
For instance Alice and Bob both are configured in Asterisk for g722 and ulaw(
allow=!all,g722,ulaw). Alice's endpoint however only supports g722 while Bob's
only supports ulaw. When Alice calls Bob, Alice negotiates g722 fine with
Asterisk. But when Asterisk sends the outgoing offer to Bob it only contains
g722 and not both g722 and ulaw, so the call ends.
This patch makes it so all the audio codecs configured on the endpoint always
get sent, and not just a subset. However priority is given to those codecs that
are compatible with the "other side".
ASTERISK-27259 #close
Change-Id: Iffabc373bd94cd1dc700925dcfe406e12918c696
|
|
|
|
|
|
When pruning a request to change the topology of a channel be
more intelligent about the resulting topology that is actually
used for SDP renegotiation.
In a case where a stream has not already been negotiated we
don't need to renegotiate and offer a declined stream. This can
occur if something in Asterisk (such as ConfBridge) requests
to add video to a PJSIP channel that has no video codecs configured.
In this case since the stream did not already exist we can safely
remove the stream from the requested topology, resulting in no
renegotiation occurring.
In a case where a renegotiation is requested with a codec that is
not supported we can reuse the formats of the existing stream if
it exists to ensure that the stream continues to flow, instead of
removing it.
Change-Id: I636540798d55922377318fe619c510fb6ed125fb
|
|
During a reinvite, if a remote endpoint error occurs and it returns a 500 the
session would end. This patch makes it so the session is not terminated, but
continues as it was.
The reason for this is because some endpoints may send non session terminating
"server errors" like a failed codec negotiation. So in this case instead of
ending the call it can hopefully continue. In the case of a real server error
the session is already "doomed", will be known soon enough and appropriately
ended by Asterisk later.
Change-Id: Ifeedae86b8cb44b92d52c79046522ec5f0aff1d5
|
|
|
|
|
|
Change-Id: If3ab0d73d79ac4623308bd48508af2bfd554937d
|
|
When an INVITE came in with both audio and video streams but there
were no audio codecs defined for the endpoint, we weren't declining
the audio stream. Since it's usually the first/transport stream,
when the video stream was processed and tried to use the transport,
it was empty and caused a crash. We now decline the the stream if
there are no matching codecs so when the video stream is processed,
it's now the first/transport stream and processes normally.
Change-Id: Ic854eda54c95031e66b076ecfae3041d34daa692
|
|
|
|
Some endpoints do not like a stream being reused for a new
media stream. The frame/jitterbuffer can rely on underlying
attributes of the media stream in order to order the packets.
When a new stream takes its place without any notice the
buffer can get confused and the media ends up getting dropped.
This change uses the SSRC change to determine that a new source
is reusing an existing stream and then bridge_softmix renegotiates
each participant such that they see a new media stream. This
causes the frame/jitterbuffer to start fresh and work as expected.
ASTERISK-27277
Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07
|
|
There was an issue reported where an SDP received on a 183 Session
Progress message caused a crash because the pending streams had
already been processed when the OK was received. In that case the
pending topology was legitimately NULL. There was an assert for an
incorrect number of streams in the topology but not one for
topology being NULL. In any case, if you're not in dev-mode the
asserts don't do anything and since the scenario is legit, the
asserts weren't appropriate anyway.
* Changed several asserts to warning or debug messages and return
codes as appropriate.
ASTERISK-27264
Reported by: Daniel Heckl
Change-Id: I58daaa9d2938fa980857ab3ec41925ab5ff9c848
|
|
When a sip session is refreshed, the stream topology is looped
through, checking each stream for compatible formats. This would
cause a crash if the stream state was AST_STREAM_STATE_REMOVED,
since the formats would never be set for this stream, causing
a NULL value to be returned from ast_stream_get_formats. This
commit adds a check for streams with removed states.
Also removed a stray semicolon.
Change-Id: Ic86f8b65a4a26a60885b28b8b1a0b22e1b471d42
|
|
In 45744fc53, I mistakenly broke SDP media address rewriting by
misinterpreting which address was checked in the localnet comparison.
Instead of checking the remote peer address to decide whether we need
media address rewriting, we check our local media address: if it's
local, then we rewrite. This feels awkward, but works and even made
directmedia work properly if you set local_net. (For the record: for
local peers, the SDP media rewrite code is not called, so the
comparison does no harm there.)
ASTERISK-27248 #close
Change-Id: I566be1c33f4d0a689567d451ed46bab9c3861d4f
|
|
|
|
In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
confusion about whether the transport_state->localnet ACL has ALLOW or
DENY semantics.
For the record: the localnet has DENY semantics, meaning that "not in
the list" means ALLOW, and the local nets are in the list.
Therefore, checks like this look wrong, but are right:
/* See if where we are sending this request is local or not, and if
not that we can get a Contact URI to modify */
if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
ast_debug(5, "Request is being sent to local address, "
"skipping NAT manipulation\n");
(In the list == localnet == DENY == skip NAT manipulation.)
And conversely, other checks that looked right, were wrong.
This change adds two macro's to reduce the confusion and uses those
instead:
ast_sip_transport_is_nonlocal(transport_state, addr)
ast_sip_transport_is_local(transport_state, addr)
ASTERISK-27248 #close
Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934
|
|
Stream names within Asterisk can have meaning so when an externally
initiated renegotiation occurs we need to preserve the name of
the stream if it already exists.
Change-Id: I29f50d0cc7f3238287d6d647777e76e1bdf8c596
|
|
If an SDP answer hasn't been sent yet, it's legal to change it.
This is required for PJSIP_DTMF_MODE to work correctly, and can
also have use in the future for updating codecs too.
ASTERISK-27209 #close
Change-Id: Idbbfb7cb3f72fbd96c94d10d93540f69bd51e7a1
|
|
If a previously active stream is declined we could crash because the
channel's thread is still using the stream while we are updating the
topology in the serializer thread.
* Defer removing any declined stream's handler until we have blocked the
channel's thread with the channel lock.
ASTERISK-27212
Change-Id: I50e1d3ef26f8e41948f4c411ee329aa3b960a420
|
|
|
|
A change was made long ago where the session was kept around
until the underlying INVITE session had been destroyed. This
had the side effect of also keeping the underlying media resources
around for this time as well.
This change ensures that when we are told to terminate the
session we immediately release any media sessions associated
with it.
ASTERISK-27110
Change-Id: I643e431d5c3bf05cda220c1d39e824a505a29b82
|
|
Currently, the handling of the msid attribute is not quite right. According to
the spec the msid's between the offer/answer are not dependent upon one another.
Meaning the same msid's given in an offer do not have to be returned in the
answer for a given stream. And they probably shouldn't be (copied/reused) since
this can potentially cause some browser side confusion.
This patch generates new msids when both an offer and answer are sent from
Asterisk. However, Asterisk does reuse the original msid it sent out for a
reinvite. Also audio+video streams are paired together by sharing the same
stream id, but a different track id.
ASTERISK-27179 #close
Change-Id: Ifaec06dc7e65ad841633a24ebec8c8a9302d6643
|
|
The "external_media_address" option on transports is now
resolved using dnsmgr. This allows it to be automatically
refreshed regularly if refreshes are enabled in dnsmgr.
If the system is using a dynamic IP address a dynamic DNS
hostname can be provided to keep the IP address up to
date.
Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2
|
|
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
|
|
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
|
|
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
|
