| Age | Commit message (Collapse) | Author |
|---|
|
We lose the fact that there is a swap channel if there is one. We
currently wind up rejoining the stasis bridge as a normal join after the
swap channel has already been kicked from the bridge.
This patch preserves the swap channel so the AMI/ARI events can note that
the channel joining the bridge is swapping with another channel. Another
benefit to swaqpping in one operation is if there are any channels that
get lonely (MOH, bridge playback, and bridge record channels). The lonely
channels won't leave before the joining channel has a chance to come back
in under stasis if the swap channel is the only reason the lonely channels
are staying in the bridge.
ASTERISK-25947 #close
Reported by: Richard Mudgett
ASTERISK-24649
Reported by: John Bigelow
ASTERISK-24782
Reported by: John Bigelow
Change-Id: If37ea508831d1fed6dbfac2f191c638fc0a850ee
|
|
Change-Id: I195b14994c9dcccb9452491ca20a885d2a54605a
|
|
When swapping a Local channel in place of one already
in a bridge (to complete a bridge attended transfer),
the channel that was swapped out can actually be hung
up before the stasis bridge push callback executes on
the independant transfer thread. This results in the
stasis app loop dropping out and removing the control
that has the the app name which the local replacement
channel needs so it can re-enter stasis.
To avoid this race condition a new push_peek callback
has been added, and called from the ast_bridge_impart
thread before it launches the independant thread that
will complete the transfer. Now the stasis push_peek
callback can copy the stasis app name before the swap
channel can hang up.
ASTERISK-24649
Review: https://reviewboard.asterisk.org/r/4382/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
After a bridge transfer completes where a local replacement
channel is used, a stasis transfer message with the details
of the transfer is sent. This is processed by stasis which
then sets the stasis app name and replaced channel snapshot
on the replacement channel.
However, since a separate thread was already started to run
stasis on the new replacement channel, a race was on to see
if the message processing would be completed before the app
name was needed, otherwise the channel would be hung up.
This change moves the calls used to set the stasis app name
and the replace snapshot to the bridge_stasis_push function
callback from the bridge transfer logic, allowing the steps
to be completed earlier and more deterministically, and the
race elimianted.
NOTE: the swap channel parameter to bridge_stasis_push (and
thus all bridge push callbacks) must always be present when
performing a swap with another channel.
ASTERISK-24649 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4341/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This corrects several bugs that currently exist in the stasis
application code.
* After a masquerade, the resulting channels have channel topics that
do not match their uniqueids
** Masquerades now swap channel topics appropriately
* StasisStart and StasisEnd messages are leaked to observer
applications due to being published on channel topics
** StasisStart and StasisEnd publishing is now properly restricted
to controlling apps via app topics
* Race conditions exist where StasisStart and StasisEnd messages due to
a masquerade may be received out of order due to being published on
different topics
** These messages are now published directly on the app topic so this
is now a non-issue
* StasisEnds are sometimes missing when sent due to masquerades and
bridge swaps into and out of Stasis()
** This was due to StasisEnd processing adjusting message-sent flags
after Stasis() had already exited and Stasis() had been re-entered
** This was corrected by adjusting these flags prior to sending the
message while the initial Stasis() application was still shutting
down
Review: https://reviewboard.asterisk.org/r/4213/
ASTERISK-24537 #close
Reported by: Matt DiMeo
........
Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change corrects message ordering in cases where a channel-related
message can be received after a Stasis/ARI application has received the
StasisEnd message. The StasisEnd message was being passed to
applications directly without waiting for the channel topic to empty.
As a result of this fix, other bugs were also identified and fixed:
* StasisStart messages were also being sent directly to apps and are
now routed through the stasis message bus properly
* Masquerade monitor datastores were being removed at the incorrect
time in some cases and were causing StasisEnd messages to not be sent
* General refactoring where necessary for the above
* Unsubscription on StasisEnd timing changes to prevent additional
messages from following the StasisEnd when they shouldn't
A channel sanitization function pointer was added to reduce processing
and AO2 lookups.
Review: https://reviewboard.asterisk.org/r/4163/
ASTERISK-24501 #close
Reported by: Matt Jordan
........
Merged revisions 427788 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When ARI manipulates a bridge, it generally doesn't care what the mixing
technology is. Operations on a bridge initiated through ARI should perform
their action in generally the same way, regardless of the bridge's mixing
technology. While the mixing technology may determine how media flows to
channels, the actual operations on a bridge themselves should be the same.
Currently, this isn't the case with holding bridges. When a channel joins
without a role, MoH is started on that channel automatically. Subsequent bridge
operations that would stop MoH would fail (as there is no Announcer channel
playing MoH to the bridge). Starting MoH on the bridge will also create two
MoH streams: one from the MoH being played on the participant channel, and one
from the announcer channel. From the perspective of ARI users, this is
counter-intuitive - I would not expect MoH to be started for me. The mixing
technology determines how media is shared between participants, not the
application experience.
This patch does the following:
* The Stasis bridge class now inspects channels as they are going into a
bridge. If the bridge has a holding capability, and the channel has no
roles, we give it a participant role and mark the default behaviour to have
no entertainment. This allows addChannel operations to continue to set a
participant role with an entertainment option if it felt like it (or could
do it).
* The music on hold channel is now Stasis approved (tm)
Review: https://reviewboard.asterisk.org/r/3929/
ASTERISK-24264 #close
Reported by: Samuel Galarneau
Tested by: Samuel Galarneau
........
Merged revisions 422503 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ASTERISK-24147 #close
Reported by: Edvin Vidmar
Review: https://reviewboard.asterisk.org/r/3908/
........
Merged revisions 421879 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The patch to catch channels being shoehorned into Stasis() via external
mechanisms also happens to catch Announcer and Recorder channels
because they aren't known to be stasis-controlled channels in the usual
sense. This marks those channels as Stasis()-internal channels and
allows them directly into bridges.
Review: https://reviewboard.asterisk.org/r/3903/
........
Merged revisions 420795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This fixes a class of issues where Stasis applications were not made
aware that their channels were being manipulated or replaced by
external entitiessuch as transfers, AMI commands, or dialplan
applications such as Bridge(). Inconsistent information such as
StasisEnd events with unknown channels as a result of masquerades has
also been corrected. To accomplish these fixes, several new fields
were added to blind and attended transfer messages as well as
StasisStart and BridgeAttendedTransfer Stasis events.
ASTERISK-23941 #close
Review: https://reviewboard.asterisk.org/r/3865/
Review: https://reviewboard.asterisk.org/r/3857/
Review: https://reviewboard.asterisk.org/r/3852/
Review: https://reviewboard.asterisk.org/r/3816/
Review: https://reviewboard.asterisk.org/r/3731/
Review: https://reviewboard.asterisk.org/r/3729/
Review: https://reviewboard.asterisk.org/r/3728/
........
Merged revisions 420325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Create a Stasis bridge sub-class to propagate linkedids and
accountcodes.
* Fixed the basic bridge sub-class to update peeraccount codes when the
number of channels in the bridge drops back down to two parties.
* Refactored ast_bridge_channel_update_accountcodes() to handle channels
joining/leaving the bridge.
* Fixed the basic bridge sub-class to not call the base bridge class pull
method twice.
AFS-105 #close
ASTERISK-23852 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3720/
........
Merged revisions 418225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
