| Age | Commit message (Collapse) | Author |
|---|
|
When re-inviting to add more streams it is possible for
the role of existing ICE sessions to be changed to the
incorrect value. This results in subsequent refreshes
within the sessions getting a role conflict and the ICE
session breaking down. This change only sets the role to
be the new value if an ICE renegotiation is actually
going to happen, otherwise the existing role is preserved.
As well if we encounter a situation where a unidirectional
ICE negotiation happens and the other side does not send us
candidates we will not store any information for sending
traffic, even though we know where they are reachable. This
change fixes this by using the source of the ICE traffic
itself as the target if no candidates are known and we
receive some ICE traffic.
ASTERISK-27088
Change-Id: I71228181e358917fcefc3100fad21b2fc02a59a9
|
|
The T38 sdp callback incorrectly has a side effect of incrementing
the media_count. This can lead to core dumps.
Change-Id: I7bb2f4987de4046ec52cfc34e5ea0662dae32af8
|
|
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
|
|
arm the t38 webhook always, so we can correctly reject a
T38 negotiation request when t38 is disabled on a channel
Change-Id: Ib1ffe35aee145d4e0fe61dd012580be11aae079d
|
|
Change-Id: I0bc97c6608de1d1a4228826b3b3be43f162f05f3
|
|
Do not need to unsubscribe/subscribe on creating the ednpoint's contact.
The modified function create_mwi_subscriptions_for_endpoint adds
the subscription only if it does not exist.
The subscriptions aren't added for active contacts
which are retrieved on startup from realtime
if mwi_disable_initial_unsolicited=yes.
Because the mwi_contact_added is not called.
So the subscriptions also should be created on updating contact.
ASTERISK-26230 #close
Change-Id: I47e265af9296ca09aa42a316fdacac104148cee4
|
|
|
|
contact" into 13
|
|
|
|
|
|
If the endpoint's last contact is deleted unsolicited MWI has to be
unsubscribed.
ASTERISK-27051 #close
Change-Id: I33e174e0b9dba0998927d16d6d100fda5c7254e0
|
|
When a stasis channel is stolen by another app, the control
structure is unreffed but never unlinked from the app_controls
container. This causes the channel reference to leak.
Added OBJ_UNLINK to the callback in channel_stolen_cb.
Also added some additional channel lifecycle debug messages to
channel.c.
ASTERISK-27059 #close
Repoorted-by: George Joseph
Change-Id: Ib820936cd49453f20156971785e7f4f182c56e14
|
|
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
|
|
|
|
In Corosync 2.x libraries were changed to use LibQB IPC.
Sadly LibQB IPC doesn't support copy-free access to received buffer, so
Corosync libraries were rewritten to use stack as buffer. Mostly the
needed stack size is quite small, but for all *_dispatch functions, 1MiB
is needed.
Asterisk function ast_pthread_create_background set stack size for new
thread to much smaller AST_BACKGROUND_STACKSIZE (~500KiB).
This results in Asterisk crash when running with Corosync 2.x.
Patch solves this issue by creating it's own version of
ast_pthread_create_background which sets stack size to much higher value
(actually it's AST_BACKGROUND_STACKSIZE + 3MiB).
Another problem may appear when "corosync show members" netconsole
command is executed. It is also executed in thread and also has only
500KiB stack size. Sadly it calls corosync_cfg_get_node_addrs which
again needs at least 1MiB stack.
Solution is to use HAVE_COROSYNC_CFG_STATE_TRACK as a discriminator
between Corosync 1.x and 2.x. If 1.x is found, nothing changes. If 2.x
is found, NodeID is displayed instead of IP address.
ASTERISK-25370 #close
Reported by: mdu113
Change-Id: Id95b0d21ab6e708e7d74ad8786c587211676fa08
|
|
The recent change to make the use of LOAD_DECLINE more consistent
caused res_ari to unload itself before declining if the ari.conf
file wasn't found. The ari stubs though still tried to use the
configuration resulting in segfaults.
This patch creates a new CHECK_ARI_MODULE_LOADED macro which tests
to see if res_ari is actually loaded and causes the stubs to also
decline if it isn't. The macro was then added to the mustache
template's "load_module" function.
ASTERISK-27026 #close
Reported-by: Ronald Raikes
Change-Id: I263d56efa628ee3c411bdcd16d49af6260c6c91d
|
|
|
|
|
|
|
|
session_outgoing_nat_hook" into 13
|
|
destroy_subscription was attempting to get the id of the
subscription tree's endpoint after we'd already called ao2_cleanup
on it causing a segfault.
Moved the cleanup until after the debug statement and since
endpoint could also be NULL at this point, check for that as well.
ASTERISK-27057 #close
Reported-by: Ryan Smith
Change-Id: Ice0a7727f560cf204d870a774c6df71e159b1678
|
|
There was a typo introduced in commit 776ffd77 which was preventing
the transport's external media address from being used.
ASTERISK-27024 #close
Reported-by: Christopher van de Sande
patches:
patch.diff submitted by Florian Floimair (license 6892)
Change-Id: I7ec617171eaa2d86d2680b00cf37d5088adafc27
|
|
Added check for NULL return value when calling
ast_sorcery_retrieve_by_id in function get_write_timeout
ASTERISK-27046
Change-Id: I9357717278da631c3a1cb502c412693929b0cb41
|
|
disabled" into 13
|
|
It looks like there was a copy/paste error in ast_rtp_change_source
where if there was a rtcp srtp instance, instead of updating its
ssrc we were updating the srtp instance ssrc twice.
ASTERISK-27022 #close
Reported-by: Michael Walton
Change-Id: Ic88f3aee7227b401c58745ac265ff92c19620095
|
|
When doing an attended transfer it's possible for the transferer, after
receiving an accepted response from Asterisk, to send a BYE to Asterisk,
which can then be processed before Asterisk has time to start and/or
complete the transfer process. This of course causes the transfer to not
complete successfully, thus dropping the call.
This patch makes it so any BYEs received from the transferer, after the REFER,
that initiate a session end are deferred until the transfer is complete. This
allows the channel that would have otherwise been hung up by Asterisk to
remain available throughout the transfer process.
ASTERISK-27053 #close
Change-Id: I43586db79079457d92d71f1fd993be9a3b409d5a
|
|
If sending unsolicited mwi to all endpoints on startup is disabled
(mwi_disable_initial_unsolicited=yes) do not need to create subscriptions.
If there are many (thousands) realtime endpoints configured with unsolicited mwi
and Vociemail Storage configured as ODBC or IMAP there will be huge number of
DB/IMAP requests on startup.
ASTERISK-26230 #close
Change-Id: I50ae909639e3ee298b931a54def4b2b9e0fb86c5
|
|
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
|
|
it." into 13
|
|
When a frame destined for a MulticastRTP channel does not have timing
information (such as when an 'originate' is done), we generate the RTP
timestamps ourselves without regard to the number of samples we are
about to send.
Instead, use the same method as res_rtp_asterisk and 'predict' a
timestamp given the number of samples. If the difference between the
timestamp that we generate and the one we predict is within a specific
threshold, use the predicted timestamp so that we end up with timestamps
that are consistent with the number of samples we are actually sending.
Change-Id: I2bf0db3541b1573043330421cbb114ff0f22ec1f
|
|
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
|
|
|
|
|
|
|
|
|
|
ASTERISK-27021 #close
Reported by: Tim Morgan
Change-Id: I0ac061f040093e806c3b1f4e2340864f3ce4dd75
|
|
In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
creation when sending signed linear so that the byte order was adjusted
during transmission. This was needed because smoother flags were lost
during the new format work that was done in Asterisk 13.
Rather than rolling that same hack into res_rtp_multicast, re-introduce
smoother flags so that formats can dictate their own options.
Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16
|
|
ASTERISK-25294 #close
Reported by: Tzafrir Cohen
ASTERISK-26976 #close
Reported by: Alex
Change-Id: I789b1c3d1ed31365bbd9339fa58ef36f48833c40
|
|
|
|
|
|
|
|
into 13
|
|
|
|
algorithm" into 13
|
|
This change allows the format of the EAGI audio pipe to be changed by
setting the dialplan variable 'EAGI_AUDIO_FORMAT' to the name of one of
the loaded formats.
ASTERISK-26124 #close
Change-Id: I7a10fad401ad2a21c68c2e7246fa357d5cee5bbd
|
|
Documented the 'beep' option in both the parameters list and the command
description.
ASTERISK-23839 #close
Change-Id: I4970395c922dbdce3f7cf0f56d5b065ec9aa53ea
|
|
Explicitly check that the appropriate number of arguments were passed to
SET VARIABLE before attempting to reference them. Also initialize the
arguments array to zeroes before populating it.
ASTERISK-22432 #close
Change-Id: I5143607d80a2724f749c1674f3126b04ed32ea97
|
|
If the generated XML documentation for a command does not end with a \n,
the postamble of the usage message does not appear on its own line.
ASTERISK-25662 #close
Change-Id: If190f1e9e37fe215fed95897d78d4a6e142b0020
|
|
Some devices separate format attributes with a semicolon followed by a
space, so trim blanks before trying to match them.
ASTERISK-27008 #close
Change-Id: Ia44cb2e4fef5c73dc541a29da79cb0e19c22d9cc
|
|
When using rtcp mux if an rtcp payload came in it would still use the srtp
unprotect algorithm instead of the srtp unprotect rtcp method. Since rtcp
data was being passed to the rtp unprotect method this would result in an
error.
This patch ensures that the correct unprotect method is chosen by making
sure the passed in rtcp flag is appropriately set when rtcp mux is enabled
and an rtcp payload is received.
ASTERISK-26979 #close
Change-Id: Ic5409f9d1a267f1d4785fc5aed867daaecca6241
|
