Age | Commit message (Collapse) | Author |
|
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421645 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This was causing the AMI show_subscriptions test in
the testsuite to fail since all subscriptions were being
seen as subscribers instead of notifiers.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 421485 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 421447 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If /channels/{channelID}/continue is called on a channel that was originated
without a PBX (such as the ARI command POST channel with a stasis application
argument), the channel will not start dialplan execution. This patch will now
run the PBX out of the stasis execution if the channel doesn't currently have
an active PBX upon continuing.
ASTERISK-24043 #close
Reported by: Krandon Bruse
Review: https://reviewboard.asterisk.org/r/3917/
Patches:
stasis-continue.diff submitted by Krandon Bruse (license 6631)
........
Merged revisions 421416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A calls B
B answers
B SIP attended transfers to C
C answers, B and C can see each other's connected line information
B completes the transfer
A has number but no name connected line information about C
while C has the full information about A
I examined the incoming and outgoing party id information handling of
chan_pjsip and found several issues:
* Fixed ast_sip_session_create_outgoing() not setting up the configured
endpoint id as the new channel's caller id. This is why party A got
default connected line information.
* Made update_initial_connected_line() use the channel's CALLERID(id)
information. The core, app_dial, or predial routine may have filled in or
changed the endpoint caller id information.
* Fixed chan_pjsip_new() not setting the full party id information
available on the caller id and ANI party id. This includes the configured
callerid_tag string and other party id fields.
* Fixed accessing channel party id information without the channel lock
held.
* Fixed using the effective connected line id without doing a deep copy
outside of holding the channel lock. Shallow copy string pointers can
become stale if the channel lock is not held.
* Made queue_connected_line_update() also update the channel's
CALLERID(id) information. Moving the channel to another bridge would need
the information there for the new bridge peer.
* Fixed off nominal memory leak in update_incoming_connected_line().
* Added pjsip.conf callerid_tag string to party id information from
enabled trust_inbound endpoint in caller_id_incoming_request().
AFS-98 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3913/
........
Merged revisions 421400 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Forgot a parameter. Whoops.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If a function fails to execute, it is most likely due to one of two reasons:
(1) The function doesn't exist or can't be read from
(2) The function is dangerous and is restricted based on the user's permissions
Currently we return allocation failure, which is incorrect. This updates the
reason code to more accurately reflect why the request failed.
ASTERISK-24215
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/3914/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The res_hep_rtcp module was incorrectly including <pjsip.h>. This didn't need
to be included, as the module does not using PJPROJECT any fashion.
Unfortunately, because res_hep_rtcp did not include pjsip in its MODULEINFO as
a dependency, this also meant that res_hep_rtcp will fail to compile on a
system without PJPROJECT.
This patch removes the include.
Thanks to Damien Wedhorn for pointing this out in #asterisk-dev.
ASTERISK-24236 #close
Reported by: Damien Wedhorn, Matt Jordan
Tested by: Damien Wedhorn
........
Merged revisions 421064 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reduce the scope of local_peer and only get it if the ARI originate is
subscribing to the channels.
Review: https://reviewboard.asterisk.org/r/3905/
........
Merged revisions 421009 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This prevents a crash from occurring when a contact with no URI is used
for the creation of an outbound out-of-dialog request with no
associated endpoint.
........
Merged revisions 420949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and not hungup.
* Made use ast_copy_string() instead of strcpy() for snoop uniqueid for
safety. There is no guarantee that the max channel uniqueid length will
remain the same as the snoop uniqueid space.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 420836 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Return the correct value instead of always returning 0 when setting
internal status on unreal channels.
Reported by: Richard Mudgett
........
Merged revisions 420802 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The patch to catch channels being shoehorned into Stasis() via external
mechanisms also happens to catch Announcer and Recorder channels
because they aren't known to be stasis-controlled channels in the usual
sense. This marks those channels as Stasis()-internal channels and
allows them directly into bridges.
Review: https://reviewboard.asterisk.org/r/3903/
........
Merged revisions 420795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The unit tests require a sorcery.conf file that has been
set up to store resource lists in memory rather than retrieving
from configuration.
With a setup that is not conducive to running the tests, a fault
in sorcery currently causes Asterisk to crash when attempting to
run any of the tests.
To get around the crash, this adds a function that verifies the
current environment and marks the tests as "not run" if the setup
is not correct.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Running testsuite tests locally produced no errors, but when
run using the continuous integration framework, crashes occurred.
The crashes occurred due to a refcounting error that had been fixed
for a similar situation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These modules were originally specified as being disabled, as they were
introduced midstream in Asterisk 12. That makes it nicer for folks who are
upgrading to a new release in the middle of Asterisk 12. That's not the case
for Asterisk 13: it's a brand new release. There's no reason to have the
modules disabled by default in that case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit adds the ability for a user to configure
a resource list in pjsip.conf. Subscribing to this
list simultaneously subscribes the subscriber to all
resources listed. This has the potential to reduce
the amount of SIP traffic when loads of subscribers
on a system attempt to subscribe to each others' states.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This fixes a class of issues where Stasis applications were not made
aware that their channels were being manipulated or replaced by
external entitiessuch as transfers, AMI commands, or dialplan
applications such as Bridge(). Inconsistent information such as
StasisEnd events with unknown channels as a result of masquerades has
also been corrected. To accomplish these fixes, several new fields
were added to blind and attended transfer messages as well as
StasisStart and BridgeAttendedTransfer Stasis events.
ASTERISK-23941 #close
Review: https://reviewboard.asterisk.org/r/3865/
Review: https://reviewboard.asterisk.org/r/3857/
Review: https://reviewboard.asterisk.org/r/3852/
Review: https://reviewboard.asterisk.org/r/3816/
Review: https://reviewboard.asterisk.org/r/3731/
Review: https://reviewboard.asterisk.org/r/3729/
Review: https://reviewboard.asterisk.org/r/3728/
........
Merged revisions 420325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
state using SIP.
This module uses the inbound and outbound PUBLISH support to exchange device and mailbox
state between Asterisk instances. Each instance is configured to publish to the other and
requires no intermediary server. The functionality provided is similar to the XMPP and
Corosync support.
Review: https://reviewboard.asterisk.org/r/3780/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This module implements the core parts required for doing outbound PUBLISH.
It takes care of configuration, lifetime management, and authentication.
Additional modules implement the specific events that are published.
Review: https://reviewboard.asterisk.org/r/3780/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 420099 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This adds a large swath of response documentation for PJSIPShowEndpoint
and PJSIPShowEndpoints AMI commands. It relies heavily on the existing
text in the configInfo documentation via xi:include tags to avoid
documentation duplication.
Review: https://reviewboard.asterisk.org/r/3888/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Now when running PJSIPShowEndpoint, you will receive a
ContactStatusDetail for each bound contact that Asterisk
is qualifying. This information includes the URI of the
contact, current reachability, and roundtrip time.
AFS-91 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3797
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/3817/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes
to the RTCP topics in Stasis and receives RTCP information back from the
message bus. It encodes into HEPv3 packets and sends the information to the
res_hep module for transmission.
Using this, someone with a Homer server can get live call quality monitoring
for all RTP-based channels in their Asterisk 12+ systems.
In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and
chan_pjsip that were uncovered by the tests written for the Asterisk Test
Suite. This patch fixes the following:
1) chan_pjsip failed to set its channel unique ids on its RTP instance on
outbound calls. It now does this in the appropriate location, in the
serialized call callback.
2) The rtp_engine was overflowing some values when packed into JSON.
Specifically, some longs and unsigned ints can't be be packed into integer
values, for obvious reasons. Since libjansson only supports integers,
floats, strings, booleans, and objects, we print these values into strings.
3) res_rtp_asterisk had a few problems:
(a) it would emit a source IP address of 0.0.0.0 if bound to that IP
address. We now use ast_find_ourip to get a better IP address, and
properly marshal the result into an ast_strdupa'd string.
(b) Reports can be generated with no report bodies. In particular, this
occurs when a sender is transmitting information to a receiver (who
will send no RTP back to the sender). As such, the sender has no report
body for what it received. We now properly handle this case, and the
sender will emit SR reports with no body. Likewise, if we receive an
RTCP packet with no report body, we will still generate the appropriate
events.
ASTERISK-24119 #close
........
Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds three new AMI commands:
* ExtensionStateList (pbx.c) - list all known extension state hints
and their current statuses. Events emitted by the list action are
equivalent to the ExtensionStatus events.
* PresenceStateList (res_manager_presencestate) - list all known
presence state values. Events emitted are generated by the stasis
message type, and hence are PresenceStateChange events.
* DeviceStateList (res_manager_devicestate) - list all known device
state values. Events emitted are generated by the stasis message
type, and hence are DeviceStateChange events.
Patch-by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3799/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
be set.
Since the PJSIP INVITE session module is invoked before any session supplements it was
possible for it to handle a redirect before the res_pjsip_diversion module interpreted
and set redirecting information on the channel. This would cause the redirecting
information to get lost.
This patch ensures that session supplements are *always* invoked before a redirect occurs
by explicitly calling them in the redirect handler.
Review: https://reviewboard.asterisk.org/r/3850/
........
Merged revisions 419764 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
entity is unquoted.
The local entity as provided by PJSIP is quoted within '<' and '>'. As a result placing
this value into XML will result in malformed XML being produced. This patch now unquotes
the local entity so it can go safely into the XML.
Review: https://reviewboard.asterisk.org/r/3851/
........
Merged revisions 419750 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
"module show" .
ASTERISK-23919 #close
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/3802
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines
ARI: report duration values in LiveRecording objects
This patch adds three new fields to the LiveRecording model:
- total_duration: the total length of the live recording
- talking_duration: optional. The duration of talking energy that was
detected while the recording was made.
- silence_duration: optional. The duration of silence that was detected while
the recording was made.
These values are reported in the RecordingFinished ARI event.
When a DSP is enabled on the channel during the recording - which occurs when
the recording is created with max_silence_seconds (indicating that the user
actually cares about how much silence is in the file), we will report the
talking_duration and silence_duration in addition to the total_duration.
Review: https://reviewboard.asterisk.org/r/3770/
ASTERISK-24037 #close
Reported by: Samuel Galarneau
........
r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line
Update CHANGES for r419565
........
Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When Asterisk starts a module (calling its load_module function), it re-orders
the module list, sorting it alphabetically. Ostensibly, this was done so that
the output of 'module show' listed modules in alphabetic order. This had the
unfortunate side effect of making modules with complex usage patterns
unloadable. A module that has a large number of modules that depend on it is
typically abandoned during the unloading process. This results in its memory
not being reclaimed during exit.
Generally, this isn't harmful - when the process is destroyed, the operating
system will reclaim all memory allocated by the process. Prior to Asterisk 12,
we also didn't have many modules with complex dependencies. However, with
the advent of ARI and PJSIP, this can make make unloading those modules
successfully nearly impossible, and thus tracking memory leaks or ref debug
leaks a real pain.
While this patch is not a complete overhaul of the module loader - such an
effort would be beyond the scope of what could be done for Asterisk 13 -
this does make some marginal improvements to the loader such that modules
like res_pjsip or res_stasis *may* be made properly un-loadable in the future.
1. The linked list of modules has been replaced with a doubly linked list. This
allows traversal of the module list to occur backwards. The module shutdown
routine now walks the global list backwards when it attempts to unload
modules.
2. The alphabetic reorganization of the module list on startup has been
removed. Instead, a started module is placed at the end of the module list.
3. The ast_update_module_list function - which is used by the CLI to display
the modules - now does the sorting alphabetically itself. It creates its own
linked list and inserts the modules into it in alphabetic order. This allows
for the intent of the previous code to be maintained.
This patch also contains a fix for res_calendar. Without calendar.conf, the
calendar modules were improperly bumping the use count of res_calendar, then
failing to load themselves. This patch makes it so that we detect whether or
not calendaring is enabled before altering the use count.
Review: https://reviewboard.asterisk.org/r/3777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Unregister manager actions FAXSessions, FAXSession and FAXStats at unload.
* Update ast_manager_register2 use ao2_t_alloc tagged with the action name.
ASTERISK-24058 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3831/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 419129 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 419162 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 419163 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Remove functions:
ast_smdi_interface_unref
ast_smdi_md_message_putback
ast_smdi_mwi_message_putback
ast_smdi_md_message destructor
ast_smdi_mwi_message destructor
Includes for astobj.h are removed everywhere it's possible.
ASTERISK-24066 #close
Review: https://reviewboard.asterisk.org/r/3758/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In the old times media formats were represented using a bit field. This was
fast but had a few limitations.
1. Asterisk was limited in how many formats it could handle.
2. Formats, being a bit field, could not include any attribute information.
A format was strictly its type, e.g., "this is ulaw".
This was changed in Asterisk 10 (see
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for
notes on that work) which led to the creation of the ast_format structure.
This structure allowed Asterisk to handle attributes and bundle information
with a format.
Additionally, ast_format_cap was created to act as a container for multiple
formats that, together, formed the capability of some entity. Another
mechanism was added to allow logic to be registered which performed format
attribute negotiation. Everywhere throughout the codebase Asterisk was
changed to use this strategy.
Unfortunately, in software, there is no free lunch. These new capabilities
came at a cost.
Performance analysis and profiling showed that we spend an inordinate
amount of time comparing, copying, and generally manipulating formats and
their related structures. Basic prototyping has shown that a reasonably
large performance improvement could be made in this area. This patch is the
result of that project, which overhauled the media format architecture
and its usage in Asterisk to improve performance.
Generally, the new philosophy for handling formats is as follows:
* The ast_format structure is reference counted. This removed a large amount
of the memory allocations and copying that was done in prior versions.
* In order to prevent race conditions while keeping things performant, the
ast_format structure is immutable by convention and lock-free. Violate this
tenet at your peril!
* Because formats are reference counted, codecs are also reference counted.
The Asterisk core generally provides built-in codecs and caches the
ast_format structures created to represent them. Generally, to prevent
inordinate amounts of module reference bumping, codecs and formats can be
added at run-time but cannot be removed.
* All compatibility with the bit field representation of codecs/formats has
been moved to a compatibility API. The primary user of this representation
is chan_iax2, which must continue to maintain its bit-field usage of formats
for interoperability concerns.
* When a format is negotiated with attributes, or when a format cannot be
represented by one of the cached formats, a new format object is created or
cloned from an existing format. That format may have the same codec
underlying it, but is a different format than a version of the format with
different attributes or without attributes.
* While formats are reference counted objects, the reference count maintained
on the format should be manipulated with care. Formats are generally cached
and will persist for the lifetime of Asterisk and do not explicitly need
to have their lifetime modified. An exception to this is when the user of a
format does not know where the format came from *and* the user may outlive
the provider of the format. This occurs, for example, when a format is read
from a channel: the channel may have a format with attributes (hence,
non-cached) and the user of the format may last longer than the channel (if
the reference to the channel is released prior to the format's reference).
For more information on this work, see the API design notes:
https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite
Finally, this work was the culmination of a large number of developer's
efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the
work in the Asterisk core, chan_sip, and was an invaluable resource in peer
reviews throughout this project.
There were a substantial number of patches contributed during this work; the
following issues/patch names simply reflect some of the work (and will cause
the release scripts to give attribution to the individuals who work on them).
Reviews:
https://reviewboard.asterisk.org/r/3814
https://reviewboard.asterisk.org/r/3808
https://reviewboard.asterisk.org/r/3805
https://reviewboard.asterisk.org/r/3803
https://reviewboard.asterisk.org/r/3801
https://reviewboard.asterisk.org/r/3798
https://reviewboard.asterisk.org/r/3800
https://reviewboard.asterisk.org/r/3794
https://reviewboard.asterisk.org/r/3793
https://reviewboard.asterisk.org/r/3792
https://reviewboard.asterisk.org/r/3791
https://reviewboard.asterisk.org/r/3790
https://reviewboard.asterisk.org/r/3789
https://reviewboard.asterisk.org/r/3788
https://reviewboard.asterisk.org/r/3787
https://reviewboard.asterisk.org/r/3786
https://reviewboard.asterisk.org/r/3784
https://reviewboard.asterisk.org/r/3783
https://reviewboard.asterisk.org/r/3778
https://reviewboard.asterisk.org/r/3774
https://reviewboard.asterisk.org/r/3775
https://reviewboard.asterisk.org/r/3772
https://reviewboard.asterisk.org/r/3761
https://reviewboard.asterisk.org/r/3754
https://reviewboard.asterisk.org/r/3753
https://reviewboard.asterisk.org/r/3751
https://reviewboard.asterisk.org/r/3750
https://reviewboard.asterisk.org/r/3748
https://reviewboard.asterisk.org/r/3747
https://reviewboard.asterisk.org/r/3746
https://reviewboard.asterisk.org/r/3742
https://reviewboard.asterisk.org/r/3740
https://reviewboard.asterisk.org/r/3739
https://reviewboard.asterisk.org/r/3738
https://reviewboard.asterisk.org/r/3737
https://reviewboard.asterisk.org/r/3736
https://reviewboard.asterisk.org/r/3734
https://reviewboard.asterisk.org/r/3722
https://reviewboard.asterisk.org/r/3713
https://reviewboard.asterisk.org/r/3703
https://reviewboard.asterisk.org/r/3689
https://reviewboard.asterisk.org/r/3687
https://reviewboard.asterisk.org/r/3674
https://reviewboard.asterisk.org/r/3671
https://reviewboard.asterisk.org/r/3667
https://reviewboard.asterisk.org/r/3665
https://reviewboard.asterisk.org/r/3625
https://reviewboard.asterisk.org/r/3602
https://reviewboard.asterisk.org/r/3519
https://reviewboard.asterisk.org/r/3518
https://reviewboard.asterisk.org/r/3516
https://reviewboard.asterisk.org/r/3515
https://reviewboard.asterisk.org/r/3512
https://reviewboard.asterisk.org/r/3506
https://reviewboard.asterisk.org/r/3413
https://reviewboard.asterisk.org/r/3410
https://reviewboard.asterisk.org/r/3387
https://reviewboard.asterisk.org/r/3388
https://reviewboard.asterisk.org/r/3389
https://reviewboard.asterisk.org/r/3390
https://reviewboard.asterisk.org/r/3321
https://reviewboard.asterisk.org/r/3320
https://reviewboard.asterisk.org/r/3319
https://reviewboard.asterisk.org/r/3318
https://reviewboard.asterisk.org/r/3266
https://reviewboard.asterisk.org/r/3265
https://reviewboard.asterisk.org/r/3234
https://reviewboard.asterisk.org/r/3178
ASTERISK-23114 #close
Reported by: mjordan
media_formats_translation_core.diff uploaded by kharwell (License 6464)
rb3506.diff uploaded by mjordan (License 6283)
media_format_app_file.diff uploaded by kharwell (License 6464)
misc-2.diff uploaded by file (License 5000)
chan_mild-3.diff uploaded by file (License 5000)
chan_obscure.diff uploaded by file (License 5000)
jingle.diff uploaded by file (License 5000)
funcs.diff uploaded by file (License 5000)
formats.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
bridges.diff uploaded by file (License 5000)
mf-codecs-2.diff uploaded by file (License 5000)
mf-app_fax.diff uploaded by file (License 5000)
mf-apps-3.diff uploaded by file (License 5000)
media-formats-3.diff uploaded by file (License 5000)
ASTERISK-23715
rb3713.patch uploaded by coreyfarrell (License 5909)
rb3689.patch uploaded by mjordan (License 6283)
ASTERISK-23957
rb3722.patch uploaded by mjordan (License 6283)
mf-attributes-3.diff uploaded by file (License 5000)
ASTERISK-23958
Tested by: jrose
rb3822.patch uploaded by coreyfarrell (License 5909)
rb3800.patch uploaded by jrose (License 6182)
chan_sip.diff uploaded by mjordan (License 6283)
rb3747.patch uploaded by jrose (License 6182)
ASTERISK-23959 #close
Tested by: sgriepentrog, mjordan, coreyfarrell
sip_cleanup.diff uploaded by opticron (License 6273)
chan_sip_caps.diff uploaded by mjordan (License 6283)
rb3751.patch uploaded by coreyfarrell (License 5909)
chan_sip-3.diff uploaded by file (License 5000)
ASTERISK-23960 #close
Tested by: opticron
direct_media.diff uploaded by opticron (License 6273)
pjsip-direct-media.diff uploaded by file (License 5000)
format_cap_remove.diff uploaded by opticron (License 6273)
media_format_fixes.diff uploaded by opticron (License 6273)
chan_pjsip-2.diff uploaded by file (License 5000)
ASTERISK-23966 #close
Tested by: rmudgett
rb3803.patch uploaded by rmudgetti (License 5621)
chan_dahdi.diff uploaded by file (License 5000)
ASTERISK-24064 #close
Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose
rb3814.patch uploaded by rmudgett (License 5621)
moh_cleanup.diff uploaded by opticron (License 6273)
bridge_leak.diff uploaded by opticron (License 6273)
translate.diff uploaded by file (License 5000)
rb3795.patch uploaded by rmudgett (License 5621)
tls_fix.diff uploaded by mjordan (License 6283)
fax-mf-fix-2.diff uploaded by file (License 5000)
rtp_transfer_stuff uploaded by mjordan (License 6283)
rb3787.patch uploaded by rmudgett (License 5621)
media-formats-explicit-translate-format-3.diff uploaded by file (License 5000)
format_cache_case_fix.diff uploaded by opticron (License 6273)
rb3774.patch uploaded by rmudgett (License 5621)
rb3775.patch uploaded by rmudgett (License 5621)
rtp_engine_fix.diff uploaded by opticron (License 6273)
rtp_crash_fix.diff uploaded by opticron (License 6273)
rb3753.patch uploaded by mjordan (License 6283)
rb3750.patch uploaded by mjordan (License 6283)
rb3748.patch uploaded by rmudgett (License 5621)
media_format_fixes.diff uploaded by opticron (License 6273)
rb3740.patch uploaded by mjordan (License 6283)
rb3739.patch uploaded by mjordan (License 6283)
rb3734.patch uploaded by mjordan (License 6283)
rb3689.patch uploaded by mjordan (License 6283)
rb3674.patch uploaded by coreyfarrell (License 5909)
rb3671.patch uploaded by coreyfarrell (License 5909)
rb3667.patch uploaded by coreyfarrell (License 5909)
rb3665.patch uploaded by mjordan (License 6283)
rb3625.patch uploaded by coreyfarrell (License 5909)
rb3602.patch uploaded by coreyfarrell (License 5909)
format_compatibility-2.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds a new operation for stored recordings, copy. It takes an
existing stored recording and makes a copy of it in the same directory
or a relative directory under the stored recording directory.
/ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name}
This is particularly useful for voicemail-esque applications, which may need to
copy or move recordings around a directory structure.
Review: https://reviewboard.asterisk.org/r/3768/
ASTERISK-24036 #close
Reported by: Sam Galarneau
Tested by: Sam Galarneau
........
Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If a reference count goes negative, instead of
just logging that fact, be more helpful with a
backtrace and an assert that will DO_CRASH.
This patch also removes the duplicate ao2_bt()
function and cleans up extraneous usage of the
ast_log_backtrace() call.
Review: https://reviewboard.asterisk.org/r/3765/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.
Review: https://reviewboard.asterisk.org/r/3721/
........
Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Specifically the following equivalents were created:
fax show session -> FAXSession
fax show sessions -> FAXSessions
fax show stats -> FAXStats
Review: https://reviewboard.asterisk.org/r/3666/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418911 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|