| Age | Commit message (Collapse) | Author |
|---|
|
transport"
|
|
struct ast_rtcp does not define the dtls member if SRTP is not enabled.
ASTERISK-26732
Change-Id: Id15ea212e04490e012f2cf4a56818b4dd948875e
|
|
|
|
We were inadvertenly referencing the cos_video option to determine if we
should set the tos_audio and cos_audio value on the RTP instance.
Change-Id: Ia7964f486801d39dc6f5dae570baff079e1595b0
|
|
If local_net is not defined on a transport, transport_state->localnet
will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
this case, causing the external_media_address, if set, to be skipped.
This patch causes us to only check if we are sending within a network if
local_net is defined.
ASTERISK-26879 #close
Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb
|
|
|
|
Currently a wildcard address is used for the local RTP socket, which
will not always result in the same address as used by the SIP socket
(e.g. if explicit transport addresses are configured).
Use the transport's host address when binding new local RTP sockets if
available.
ASTERISK-26851
Change-Id: I098c29c9d1f79a4f970d72ba894874ac75954f1a
|
|
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
|
|
This change removes an assumption that when DTLS is stopped
an RTCP session will be present on the RTP session. This is not
always the case.
ASTERISK-26732
Change-Id: Ib9f7c09ce0b005efe362dbcc8795202b18f94611
|
|
|
|
|
|
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
|
|
When transfering to a URI without an extension, ensure that the
s extension of the dialplan is entered
ASTERISK-26869 #close
Change-Id: I07403df66cf93f09e00a40ab5b41bfc6f72b1525
|
|
This change ensures that if no header_match option is set on an
identify an error message is not output stating the option is set
to an invalid value.
ASTERISK-26863
Change-Id: I239bc6d2319dd3da24ba96a38d4d6e9b5526d62a
|
|
This patch adds a new features to the endpoint identifier module,
'match_header'. When set, inbound requests are matched by a provided SIP
header: value pair. This option works in conjunction with the existing
'match' configuration option, such that if any 'match*' attribute
matches an inbound request, the request is associated with the specified
endpoint.
Since this module now identifies by more than just IP address,
appropriate renaming of the module and/or variables can be done in a
non-release branch.
ASTERISK-26863 #close
Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453
(cherry picked from commit 30f52d79d7fc9ab0b628bef2b61ea515413795a2)
|
|
|
|
|
|
* Added additional fields to ast_sdp_options.
* Re-organized ast_sdp.
* Updated field names to correspond to RFC4566 terminology.
* Created allocs/frees for SDP children.
* Created getters/setters for SDP children where appropriate.
* Added ast_sdp_create_from_state.
* Refactored res_sdp_translator_pjmedia for changes.
Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48
|
|
Tabs > spaces. Always.
Change-Id: I899ff662361c7ab0327173bd7851a67b53dd65f1
|
|
* res_musiconhold.c: Ensure the general section is not treated as
a moh class.
ASTERISK-26353 #close
Change-Id: Ia3dbd11ea2b43ab3e6c820a9827811dd24bea82d
|
|
This change adds a PJSIP patch (which has been contributed upstream)
to allow the registration of IPv6 transport types.
Using this the res_pjsip_transport_websocket module now registers
an IPv6 Websocket transport and uses it for the corresponding
traffic.
ASTERISK-26685
Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647
|
|
When doing some WebRTC testing, I found that the websocket would
disconnect whenever I attempted to place a call into Asterisk. After
looking into it, I pinpointed the problem to be due to the iostreams
change being merged in.
Under certain circumstances, a call to ast_iostream_read() can return a
negative value. However, in this circumstance, the websocket code was
treating this negative return as if it were a partial read from the
websocket. The expected length would get adjusted by this negative
value, resulting in the expected length being too large.
This patch simply adds an if check to be sure that we are only updating
the expected length of a read when the return from a read is positive.
ASTERISK-26842 #close
Reported by Mark Michelson
Change-Id: Ib4423239828a013d27d7bc477d317d2f02db61ab
|
|
|
|
According to the RFC[1] WSS should only be used in the Via header
for secure Websockets.
* Use WSS in Via for secure transport.
* Only register one transport with the WS name because it would be
ambiguous. Outgoing requests may try to find the transport by name and
pjproject only finds the first one registered. This may mess up unsecure
websockets but the impact should be minimal. Firefox and Chrome do not
support anything other than secure websockets anymore.
* Added and updated some debug messages concerning websockets.
* security_events.c: Relax case restriction when determining security
transport type.
* The res_pjsip_nat module has been updated to not touch the transport
on Websocket originating messages.
[1] https://tools.ietf.org/html/rfc7118
ASTERISK-26796 #close
Change-Id: Ie3a0fb1a41101a4c1e49d875a8aa87b189e7ab12
|
|
res_config_pgsql should match the behavior of other realtime backend
drivers so that queue_log can disable adaptive logging.
ASTERISK-25628 #close
Reported by: Dmitry Wagin
Change-Id: Ic1fb1600c7ce10fdfb1bcdc43c5576b7e0014372
|
|
|
|
|
|
|
|
|
|
|
|
The find_table() functions NULL or a locked table pointer. We are
not consistently calling release_table() in failure paths.
Change-Id: I6f665b455799c84b036e5b34904b82b05eab9544
|
|
When a subscription was being recreated and the endpoint wasn't
found, we were trying to unref the endpoint. This was causing
FRACKs. Removed the unref.
ASTERISK-26823 #close
Change-Id: If86d2aecff8fe853c7f38a1bfde721fcef3cd164
|
|
This change fixes an assumption in res_pjsip that a contact will
always have a status. There is a race condition where this is
not true and would crash. The status will now be unknown when
this situation occurs.
ASTERISK-26623 #close
Change-Id: Id52d3ca4d788562d236da49990a319118f8d22b5
|
|
Outbound registration now subscribes to network change events
published by res_stun_monitor and refreshes all registrations
when an event happens.
The 'pjsip send (un)register' CLI commands were updated to accept
'*all' as an argument to operate on all registrations.
The 'PJSIP(Un)Register' AMI commands were also updated to
accept '*all'.
ASTERISK-26808 #close
Change-Id: Iad58a9e0aa5d340477fca200bf293187a6ca5a25
|
|
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
|
|
|
|
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
|
|
* A missing AST_LIST_UNLOCK() in find_table()
* The ESCAPE_STRING() macro uses pgsqlConn under the hood and we were
not consistently locking before calling it.
* There were a handful of other places where pgsqlConn was accessed
directly without appropriate locking.
Change-Id: Iea63f0728f76985a01e95b9912c3c5c6065836ed
|
|
The initial motivation for this patch was to properly handle memory
allocation failures - we weren't checking the return values from the
various LDAP library allocation functions.
In the process, because update_ldap() and update2_ldap() were
substantially the same code, they've been consolidated.
Change-Id: Iebcfe404177cc6860ee5087976fe97812221b822
|
|
|
|
violation."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* changes:
Add SDP translator and PJMEDIA implementation.
Add initial SDP options.
|
