| Age | Commit message (Collapse) | Author |
|---|
|
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
|
|
Change-Id: I3f20ce428777cc4ce9c13b2f808d29ff8c873998
|
|
In 45744fc53, I mistakenly broke SDP media address rewriting by
misinterpreting which address was checked in the localnet comparison.
Instead of checking the remote peer address to decide whether we need
media address rewriting, we check our local media address: if it's
local, then we rewrite. This feels awkward, but works and even made
directmedia work properly if you set local_net. (For the record: for
local peers, the SDP media rewrite code is not called, so the
comparison does no harm there.)
ASTERISK-27248 #close
Change-Id: I566be1c33f4d0a689567d451ed46bab9c3861d4f
|
|
|
|
|
|
|
|
Change-Id: Ia0edb7dc0dbbb879c079ff7000f1b722d86ce7dc
|
|
If an error occurs during a bridge impart it's possible that
the "bridge_after" callback might try to run before
control_swap_channel_in_bridge has been signalled to continue.
Since control_swap_channel_in_bridge is holding the control lock
and the callback needs it, a deadlock will occur.
* control_swap_channel_in_bridge now only holds the control
lock while it's actually modifying the control structure and
releases it while the bridge impart is running.
* bridge_after_cb is now tolerant of impart failures.
Change-Id: Ifd239aa93955b3eb475521f61e284fcb0da2c3b3
|
|
|
|
channel" into 15
|
|
Asterisk is able to use libSRTP 2.0.x. However since libSRTP 2.1.x, the macro
SRTP_AES_ICM got renamed to SRTP_AES_ICM_128. Beside to still compile with
previous versions of libSRTP, this change allows libSRTP 2.1.x as well.
ASTERISK-27253 #close
Change-Id: I2e6eb3c3bc844fee8a624060a2eb6f182dc70315
|
|
In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
confusion about whether the transport_state->localnet ACL has ALLOW or
DENY semantics.
For the record: the localnet has DENY semantics, meaning that "not in
the list" means ALLOW, and the local nets are in the list.
Therefore, checks like this look wrong, but are right:
/* See if where we are sending this request is local or not, and if
not that we can get a Contact URI to modify */
if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
ast_debug(5, "Request is being sent to local address, "
"skipping NAT manipulation\n");
(In the list == localnet == DENY == skip NAT manipulation.)
And conversely, other checks that looked right, were wrong.
This change adds two macro's to reduce the confusion and uses those
instead:
ast_sip_transport_is_nonlocal(transport_state, addr)
ast_sip_transport_is_local(transport_state, addr)
ASTERISK-27248 #close
Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934
|
|
Stream names within Asterisk can have meaning so when an externally
initiated renegotiation occurs we need to preserve the name of
the stream if it already exists.
Change-Id: I29f50d0cc7f3238287d6d647777e76e1bdf8c596
|
|
Change-Id: I31eee8be30c6b0fc3dadb31111dd47742da8892d
|
|
t38_reinvite_response_cb can get called by res_pjsip_session's
session_inv_on_tsx_state_changed in situations where session->channel
is NULL. If it is, the ast_log warning segfaults because it tries
to get the channel name from a NULL channel.
* Check session->channel and print "unknown channel" when it's NULL.
ASTERISK-27236
Reported by: Ross Beer
Change-Id: I4326e288d36327f6c79ab52226d54905cdc87dc7
|
|
into 15
|
|
injection" into 15
|
|
|
|
sanitize_tdata was assuming all URIs were SIP URIs so when a non
SIP uri was in the From, To or Contact headers, the unconditional
cast of a non-pjsip_sip_uri structure to pjsip_sip_uri caused
a segfault when trying to access uri->other_param.
* Added PJSIP_URI_SCHEME_IS_SIP(uri) || PJSIP_URI_SCHEME_IS_SIPS(uri)
checks before attempting to cast or use the returned uri.
ASTERISK-27152
Reported-by: Ross Beer
Change-Id: Id380df790e6622c8058a96035f8b8f4aa0b8551f
|
|
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
|
|
This change moves the logic which learns a new source address
for RTP so it only occurs in the learning state. The learning
state is entered on initial allocation of RTP or if we are
told that the remote address for the media has changed. While
in the learning state if we continue to receive media from
the original source we restart the learning process. It is
only once we receive a sufficient number of RTP packets from
the new source that we will switch to it. Once this is done
the closed state is entered where all packets that do not
originate from the expected source are dropped.
The learning process has also been improved to take into
account the time between received packets so a flood of them
while in the learning state does not cause media to be switched.
Finally RTCP now drops packets which are not for the learned
SSRC if strict RTP is enabled.
ASTERISK-27013
Change-Id: I56a96e993700906355e79bc880ad9d4ad3ab129c
|
|
When SDP renegotiation occurs it is possible for an RTP
instance to be reused for a new stream, resulting in the remote
SSRC changing if it is part of a bundle group. This change
allows this and updates its mapping in the current bundle
group.
ASTERISK-27231
Change-Id: I6e3703974f236bc024c5dbe9bd43adae0c6fb490
|
|
If an SDP answer hasn't been sent yet, it's legal to change it.
This is required for PJSIP_DTMF_MODE to work correctly, and can
also have use in the future for updating codecs too.
ASTERISK-27209 #close
Change-Id: Idbbfb7cb3f72fbd96c94d10d93540f69bd51e7a1
|
|
Change-Id: I1e33290929e1aa7c5b9cb513f8254f2884974de8
|
|
If a previously active stream is declined we could crash because the
channel's thread is still using the stream while we are updating the
topology in the serializer thread.
* Defer removing any declined stream's handler until we have blocked the
channel's thread with the channel lock.
ASTERISK-27212
Change-Id: I50e1d3ef26f8e41948f4c411ee329aa3b960a420
|
|
|
|
fetch_access_token calls func_curl via ast_func_read. The latter returns 0 upon
success and -1 if the function is not available.
This commit inverts the return code check so that an error is printed if the
module is not loaded and not if it is loaded.
ASTERISK-27207 #close
Change-Id: I9ef903f80702d1218e8701f65a4e5e918e6548fb
|
|
When looking for recurring events, use the correct end time based on the
configured 'timeframe.'
ASTERISK-27174 #close
Reported by: Mark Thompson
Change-Id: Id90c3cfc79d561a5521d79be176683e225f2edef
|
|
* Check that the contact's reg_server matches the host's name before
deleting any prune_on_boot contacts. We don't want to delete reliable
transport contacts made with other servers if the ps_contacts database
table is shared with other servers.
Thanks to Ross Beer for pointing out that the original prune logic would
delete reliable transport contacts from other servers.
ASTERISK-27147
Change-Id: I8e439d0d1c266ffdfd7b73d1e5e466180a689bd0
|
|
Add ability to use tokens instead of passwords according to Google OAuth 2.0
protocol.
ASTERISK-27169
Reported by: Andrey Egorov
Tested by: Andrey Egorov
Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db
|
|
The fix for the issue is broken up into three parts.
This is part three which handles the client side of REGISTER requests.
The registered contact may no longer be valid on the server when the
transport used is reliable and the connection is broken.
* Re-REGISTER our contact if the reliable transport is broken after
registration completes. We attempt to re-REGISTER immediately to minimize
the time we are unreachable. Time may have already passed between the
connection being broken and the loss being detected.
* Reorder sip_outbound_registration_state_alloc() so the STATSD_GUAGE's
are still correct if an allocation failure happens.
ASTERISK-27147
Change-Id: I3668405b1ee75dfefb07c0d637826176f741ce83
|
|
The fix for the issue is broken up into three parts.
This is part two which handles the server side of REGISTER requests when
rewrite_contact is enabled. Any registered reliable transport contact
becomes invalid when the transport connection becomes disconnected.
* Monitor the rewrite_contact's reliable transport REGISTER contact for
shutdown. If it is shutdown then the contact must be removed because it
is no longer valid. Otherwise, when the client attempts to re-REGISTER it
may be blocked because the invalid contact is there. Also if we try to
send a call to the endpoint using the invalid contact then the endpoint is
not likely to see the request. The endpoint either won't be listening on
that port for new connections or a NAT/firewall will block it.
* Prune any rewrite_contact's registered reliable transport contacts on
boot. The reliable transport no longer exists so the contact is invalid.
* Websockets always rewrite the REGISTER contact address and the transport
needs to be monitored for shutdown.
* Made the websocket transport set a unique name since that is what we use
as the ao2 container key. Otherwise, we would not know which transport we
find when one of them shuts down. The names are also used for PJPROJECT
debug logging.
* Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state
event. Now the global keep_alive_interval option, initially idle shutdown
timer, and the server REGISTER contact monitor can work on wetsocket
transports.
* Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction.
Now initially idle websockets will automatically shutdown.
ASTERISK-27147
Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4
|
|
The fix for the issue is broken up into three parts.
This is part one which refactors the transport state monitor code to allow
more modules to be able to monitor transports.
* Pull the management of PJPROJECT's transport state callback code from
res_pjsip_transport_management.c into res_pjsip. Now other modules can
dynamically add and remove themselves from transport monitoring without
worrying about breaking PJPROJECT's callback chain.
* Add the ability for other modules to get a callback whenever a specific
transport is shutdown.
ASTERISK-27147
Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912
|
|
* Use monitored instead of the misleading keepalive name.
Change-Id: I9e5bcbb4ab2b82d49bcd0f06dfe85d15e0b552b6
|
|
When handling an incoming SIP MESSAGE, PJSIP
attaches the IP address that the message was
received from to the message in the variable
PJSIP_RECVADDR. When the IP address is IPv6
the :PORT appended results in an unparseable
mess. By using an additional bit flag on the
pj_sockaddr_print call, the conventional use
of brackets around the address is achieved.
ASTERISK-27193 #close
Change-Id: I12342521f2ce87a5b6e4883d480a3fd957aa9fd9
|
|
|
|
Asterisk wasn't generating or forwarding RTCP packets when native
bridge was activated. Also the stats weren't available via
CHANNEL(qos). Now the RTCP stats are always calculated.
ASTERISK-27158 #close
Change-Id: I46fb8f61c95e836b9d2dda6054b0cf205c16037b
|
|
Introduce a new property to rtp-engine to make it aware of
the desire for assymetric codecs or not. If asymmetric codecs
is not allowed, the bridge will compare read/write formats
and shut down the p2p bridge if needed
ASTERISK-26745 #close
Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f
|
|
|
|
into 15
|
|
A change was made long ago where the session was kept around
until the underlying INVITE session had been destroyed. This
had the side effect of also keeping the underlying media resources
around for this time as well.
This change ensures that when we are told to terminate the
session we immediately release any media sessions associated
with it.
ASTERISK-27110
Change-Id: I643e431d5c3bf05cda220c1d39e824a505a29b82
|
|
|
|
|
|
Currently, the handling of the msid attribute is not quite right. According to
the spec the msid's between the offer/answer are not dependent upon one another.
Meaning the same msid's given in an offer do not have to be returned in the
answer for a given stream. And they probably shouldn't be (copied/reused) since
this can potentially cause some browser side confusion.
This patch generates new msids when both an offer and answer are sent from
Asterisk. However, Asterisk does reuse the original msid it sent out for a
reinvite. Also audio+video streams are paired together by sharing the same
stream id, but a different track id.
ASTERISK-27179 #close
Change-Id: Ifaec06dc7e65ad841633a24ebec8c8a9302d6643
|
|
|
|
|
|
|
|
Support building the Asterisk httpd with version 3.0 of gmime as
well as earlier versions of that library.
ASTERISK-27173
Change-Id: I7e13dd05a3083ccb0df2dabf83110223f6a9fa8f
|
|
Change-Id: Ib5a19bfd597f63d9021baeb645fc11153b3afa57
|
|
* Remove unnecessary CMP_STOP.
* In handle_client_registration() use DEBUG_ATLEAST() to only do work
needed for the debug log message when the debug log message is needed.
* In sip_outbound_registration_state_destroy() check state->registration
for NULL.
Change-Id: I656d0fa11dda0b00048103efb1558e67a426fd80
|
