| Age | Commit message (Collapse) | Author |
|---|
|
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When transferring to a dialplan extension that will not place any outbound
calls, the only control frames that the PJSIP REFER framehook will receive
are inconsequential (such as unhold or srcchange). As such, we shouldn't
allow for the reception of those types of frames prevent us from signaling
to the transferring party that the transfer has completed successfully once
voice frames are read.
Thanks to Jonathan Rose for pointing this out.
........
Merged revisions 404439 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The documentation for ARI already specifies that the device state resource when
used for subscribing for events is "deviceState", not "device_state". The code,
however, used "device_state"; although this was inconsistent as well in doxygen
comments in resource_applications.
Because the actual resource being subscribed to is /deviceStates/{device}/, it
makes sense for the resource type specifier to be deviceState.
Note that the key value in the events is still "device_state".
........
Merged revisions 404437 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fixed several places where ao2_iterator_destroy() was not called.
* Fixed several iterator loop object variable reference problems.
* Fixed res_parking AMI actions returning non-zero. Only the AMI logoff
action can return non-zero.
Review: https://reviewboard.asterisk.org/r/3087/
........
Merged revisions 404434 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
know about.
Under normal conditions it is unlikely we will ever receive a response for a transaction
or dialog we don't know about but if any are received ignore them.
........
Merged revisions 404371 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
authentication.
The process for resending an INVITE with authentication involves restarting the UAC
session. We were incorrectly passing in that a new offer is being sent, causing the
SDP negotiation to get into a (technically speaking) funky state.
........
Merged revisions 404369 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
For the explanation, here is a copy-paste of the review board explanation:
Initially, it was discovered that performing an attended transfer of a
multiparty bridge with a PJSIP channel would cause a deadlock. A PBX thread
started a masquerade and reached the point where it was calling the fixup()
callback on the "original" channel. For chan_pjsip, this involves pushing a
synchronous task to the session's serializer. The problem was that a task ahead
of the fixup task was also attempting to perform a channel masquerade. However,
since masquerades are designed in a way to only allow for one to occur at a
time, the task ahead of the fixup could not continue until the masquerade
already in progress had completed. And of course, the masquerade in progress
could not complete until the task ahead of the fixup task had completed.
Deadlock.
The initial fix was to change the fixup task to be asynchronous. While this
prevented the deadlock from occurring, it had the frightful side effect of
potentially allowing for tasks in the session's serializer to operate on a
zombie channel.
Taking a step back from this particular deadlock, it became clear that the
problem was not really this one particular issue but that masquerades
themselves needed to be addressed. A PJSIP attended transfer operation calls
ast_channel_move(), which attempts to both set up and execute a masquerade. The
problem was that after it had set up the masquerade, the PBX thread had swooped
in and tried to actually perform the masquerade. Looking at changes that had
been made to Asterisk 12, it became clear that there never is any time now that
anyone ever wants to set up a masquerade and allow for the channel thread to
actually perform the masquerade. Everyone always is calling ast_channel_move(),
performs the masquerade itself before returning.
In this patch, I have removed all blocks of code from channel.c that will
attempt to perform a masquerade if ast_channel_masq() returns true. Now, there
is no distinction between setting up a masquerade and performing the
masquerade. It is one operation. The only remaining checks for
ast_channel_masq() and ast_channel_masqr() are in ast_hangup() since we do not
want to interrupt a masquerade by hanging up the channel. Instead, now
ast_hangup() will wait for a masquerade to complete before moving forward with
its operation.
The ast_channel_move() function has been modified to basically in-line the
logic that used to be in ast_channel_masquerade(). ast_channel_masquerade() has
been killed off for real. ast_channel_move() now has a lock associated with it
that is used to prevent any simultaneous moves from occurring at once. This
means there is no need to make sure that ast_channel_masq() or
ast_channel_masqr() are already set on a channel when ast_channel_move() is
called. It also means the channel container lock is not pulling double duty by
both keeping the container locked and preventing multiple masquerades from
occurring simultaneously.
The ast_do_masquerade() function has been renamed to do_channel_masquerade()
and is now internal to channel.c. The function now takes explicit arguments of
which channels are involved in the masquerade instead of a single channel.
While it probably is possible to do some further refactoring of this method, I
feel that I would be treading dangerously. Instead, all I did was change some
comments that no longer are true after this changeset.
The other more minor change introduced in this patch is to res_pjsip.c to make
ast_sip_push_task_synchronous() run the task in-place if we are already a SIP
servant thread. This is related to this patch because even when we isolate the
channel masquerade to only running in the SIP servant thread, we would still
deadlock when the fixup() callback is reached since we would essentially be
waiting forever for ourselves to finish before actually running the fixup. This
makes it so the fixup is run without having to push a task into a serializer at
all.
(closes issue ASTERISK-22936)
Reported by Jonathan Rose
Review: https://reviewboard.asterisk.org/r/3069
........
Merged revisions 404356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In fax_detect_framehook() a null pointer reference can occur where a
voice frame is processed but no dsp is attached to the fax detection
structure. The code block that rejects frames that detection cannot
be processed on is checking for dsp but falls through when it should
instead return, as this change implements.
(closes issue ASTERISK-22942)
Reported by: adomjan
Review: https://reviewboard.asterisk.org/r/3076/
........
Merged revisions 404351 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404352 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
system.
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change makes ast_channel_alloc return allocated channels
locked. By doing so no other thread can acquire, lock, and manipulate
the channel before it is completely set up.
(closes issue AST-1256)
Review: https://reviewboard.asterisk.org/r/3067/
........
Merged revisions 404204 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change adds a missing channel lock when adding a datastore
to a channel.
........
Merged revisions 404135 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 404136 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404137 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If object creation fails an error message will now be output with the id, type,
and configuration file.
........
Merged revisions 404029 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When creating channels via ARI, the current code fails to provide any default
format capabilities. For non-virtual channels this isn't really a problem -
the channels typically receive their capabilities as a result of the
underlying channel driver configuration. For virtual channels (such as Local
channels), the lack of any format capabilities causes the Asterisk core to
make some 'odd' choices with respect to the translation paths. The issue
reporter had some paths that had 3 hops on each channel leg, causing multiple
transcodings and some really crappy audio/performance.
By specifying a baseline of SLIN, we prevent that from occurring. Note that
this is what AMI does when it performs an Originate, as does res_clioriginate.
Review: https://reviewboard.asterisk.org/r/3068/
(issue ASTERISK-22962)
Reported by: Matt DiMeo
........
Merged revisions 403993 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Objects which are involved in SIP request creation and sending
now allow an outbound proxy to be specified. For cases where
an endpoint is used the outbound proxy specified there will
be applied.
(closes issue ASTERISK-22673)
Reported by: Antti Yrjola
Review: https://reviewboard.asterisk.org/r/3022/
........
Merged revisions 403811 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 403796 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added the ability to specify channel variables when creating/originating a
channel in ARI. The variables are sent in the body of the request and should
be formatted as a single level JSON object. No nested objects allowed.
For example: {"variable1": "foo", "variable2": "bar"}.
(closes issue ASTERISK-22872)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3052/
........
Merged revisions 403752 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added the ability to have rules that are checked when adding and/or removing
channels to/from a bridge. In this case, if a channel is currently recording
and someone attempts to add it to a bridge an "is recording" rule is checked,
fails, and a 409 conflict is returned.
Also command functions now return an integer value that can be descriptive of
what kind of problems, if any, occurred before or during execution.
(closes issue ASTERISK-22624)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2947/
........
Merged revisions 403749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan
to use the CHANNEL function on a chan_pjsip channel to obtain run-time
information about the channel from the PJSIP channel driver and the PJSIP
stack. This includes:
* RTP information, including source/destination media addresses, whether or
not the media is secure, held, and other properties.
* RTCP information. This includes sets of parseable information, as well as
individual statistic attriutes.
* PJSIP information. This includes URIs, local/remote signalling addresses,
whether or not the signalling is secure, and other properties.
* The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT
function to obtain more detailed endpoint information.
Review: https://reviewboard.asterisk.org/r/3038/
........
Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When switching to using a vector for authentication, I initialized
the vector for the artificial endpoint to be of size 1. However, this
does not result in AST_VECTOR_SIZE() returning 1 since there isn't
actually anything in the vector.
Rather than trifle with the vector by putting unnecessary elements in,
I simply changed the callback in res_pjsip_authenticator_digest.c to
explicitly report that the artificial endpoint requires authentication.
Thanks to Joshua Colp for pointing this out.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
res_sorcery_astdb.c: Fix get multiple records by regex.
* Fix sorcery_astdb_retrieve_regex() pattern matching. Let the regexec()
function match the stored key values instead of having astdb prefilter
them. Previoiusly you could only use a simple regex pattern when the
pattern began with '^'.
........
Merged revisions 403559 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fix sorcery_astdb_retrieve_regex() pattern matching. Let the regexec()
function match the stored key values instead of having astdb prefilter
them. Previoiusly you could only use a simple regex pattern when the
pattern began with '^'.
* Fix off nominal memory leak in sorcery_astdb_retrieve_regex().
........
Merged revisions 403545 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to the way pjproject internally works it was possible for the
NAT module to not be invoked on messages with-in a session dialog.
This means that the various parts of the message would not get rewritten
with the source IP address and port.
This change uses a session supplement to add the NAT module
to the dialog on the first incoming or outgoing INVITE.
(closes issue ASTERISK-22941)
Reported by: Leif Madsen
........
Merged revisions 403510 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403511 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Since Asterisk has a vector API now, places where arrays are manually
resized don't really make sense any more. Since the auth work in PJSIP
was freshly-written, it was easy to reform it to use a vector.
Review: https://reviewboard.asterisk.org/r/3044
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, res_fax_spandsp was conservative with how it initialized
the spandsp T.38 context. It would only initialize it if the driver thought
the current state was a T.38 fax. While this works fine in nominal situations,
in certain off nominal situations, res_fax_spandsp can believe that a T.38
fax will not occur when in fact one has started. In particular, this was
discovered when res_fax would fall back to audio after timing out on a T.38
upgrade. The SIP channel driver would continue to retry the re-INVITE and -
if the remote end responded after res_fax timed out with a 200 OK - a T.38
frame would be delivered to the res_fax stack when it no longer expected it.
As it turns out, there does not appear to be any downside to always
initializing the T.38 context, other than the actual memory allocation.
Since that avoids this off nominal situation (and others which are equally
likely hard to predict), this is the safest way to avoid this problem.
Much thanks to Torrey as well for providing a scenario that reproduces this
issue.
(closes issue ASTERISK-21242)
Reported by: Ashley Winters
Tested by: Torrey Searle
patches:
always-init-t38.patch uploaded by awinters (License 6477)
A_PARTY.xml uploaded by tsearle (License 5334)
........
Merged revisions 403449 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403450 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403458 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If the CDR unregistration fails due to an inflight CDR, the
res_config_sqlite module needs to bail on unloading itself. Otherwise,
the config could be unloaded (including the CDR table name) while the
CDR engine posts a CDR to the still registered backend, resulting in
a crash.
........
Merged revisions 403435 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 403398 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The code for getting channel variables from ARI assumed that you needed
to lock the channel in order to properly execute functions and read
channel variables. Apparently, this is not the case, since any dialplan
function that puts the channel into autoservice deadlocks when
attempting to remove the channel from autoservice.
........
Merged revisions 403342 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Used a static wrapper around the offending function to alleviate the issue.
Reported by: rmudgett
........
Merged revisions 403377 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This crept up during gateway testing where the gateway would receive
the request to negotiate and assume it came from the remote side, causing
the gateway state machine to go a little, to a use a technical term,
"wonky".
........
Merged revisions 403364 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Passing a non-zero value causes PJLIB to use the given input as the
hash value. Passing zero causes the parameter to become an output parameter
that receives the hash value that was computed based on the given key.
This change essentially makes ast_sip_dict_get() properly retrieve the
desired value.
........
Merged revisions 403349 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Newer versions of PJSIP have changed to using a flag for the
PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE instead of a define. This adds a
configure check to detect the presence of the flag and use it if found.
........
Merged revisions 403329 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 403271 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The check for determining whether the T.38 framehook should be added to
the channel or not has now been changed to guarantee adding only occurs
on the first incoming or outgoing INVITE.
........
Merged revisions 403258 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Transport type determination for security events has been simplified to use
the type present on the message itself instead of searching through configured
transports to find the transport used.
The actual WebSocket transport has also been simplified. It now leverages the
existing PJSIP transport manager for finding the active WebSocket transport
for outgoing messages. This removes the need for res_pjsip_transport_websocket
to store a mapping itself.
(closes issue ASTERISK-22897)
Reported by: Max E. Reyes Vera J.
Review: https://reviewboard.asterisk.org/r/3036/
........
Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 403240 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Depending on configuration it was possible for a media stream to be
created without any media formats. The produced SDP would fail internal
validation and cause a crash.
The code will now no longer add media streams with no formats to the SDP,
allowing it to pass validation and work.
(closes issue ASTERISK-22858)
Reported by: Anthony Messina
........
Merged revisions 403223 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When sending a re-INVITE to an endpoint it was possible for received
headers to be added as well (since they are stored for retrieval using
the PJSIP_HEADER dialplan function). This caused a broken (and
potentially large) SIP INVITE to be produced and sent.
This changes the module so it will no longer add headers to
re-INVITEs.
(closes issue ASTERISK-22882)
Reported by: David M. Lee
........
Merged revisions 403221 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
implementations.
This change adds new URI scheme implementations for playing numbers, digits,
and characters. This is done as part of the normal playback mechanism and can
be used with queueing to create a combined sentence.
Review: https://reviewboard.asterisk.org/r/3028/
........
Merged revisions 403209 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The action taken when a redirect occurs is now configurable on a
per-endpoint basis. The redirect can either be treated as a redirect
to a local extension, to a URI that is dialed through the Asterisk
core, or to a URI that is dialed within PJSIP itself.
(closes issue ASTERISK-21710)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2963/
........
Merged revisions 403207 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Certain options available that specify a SIP URI perform validation
on the provided URI using the PJSIP URI parser. This operation
requires that the thread executing it be registered with the PJLIB
library. During reloads this was done on a thread which was NOT
registered with it.
This fixes the problem by creating a task which reloads the
configuration on a PJSIP thread.
(closes issue ASTERISK-22923)
Reported by: Anthony Messina
........
Merged revisions 403179 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The patch allows ARI to parse request parameters from an incoming JSON
request body, instead of requiring the request to come in as query
parameters (which is just weird for POST and DELETE) or form
parameters (which is okay, but a bit asymmetric given that all of our
responses are JSON).
For any operation that does _not_ have a parameter defined of type
body (i.e. "paramType": "body" in the API declaration), if a request
provides a request body with a Content type of "application/json", the
provided JSON document is parsed and searched for parameters.
The expected fields in the provided JSON document should match the
query parameters defined for the operation. If the parameter has
'allowMultiple' set, then the field in the JSON document may
optionally be an array of values.
(closes issue ASTERISK-22685)
Review: https://reviewboard.asterisk.org/r/2994/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Some options (such as call_group and pickup_group) share the same configuration
handler and decide what logic to use based on the name of the option. These
handlers were not updated to check for the new option names and were treating
the options as invalid.
This change simply updates the handlers with the proper names of the options.
(closes issue ASTERISK-22922)
Reported by: Anthony Messina
........
Merged revisions 403173 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
