| Age | Commit message (Collapse) | Author |
|---|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@112426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
compilers a wee bit.
(closes issue #12333)
Reported by: ovi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111341 | murf | 2008-03-26 21:21:05 -0600 (Wed, 26 Mar 2008) | 15 lines
(closes issue #12302)
Reported by: pj
Tested by: murf
These changes will set a channel variable ~~EXTEN~~ just before generating code
for a switch, with the value of ${EXTEN}. The exten is marked as having a switch,
and ever after that, till the end of the exten, we substitute any ${EXTEN}
with ${~~EXTEN~~} instead in application arguments; (and the ${EXTEN: also).
The reason for this, is that because switches are coded using
separate extensions to provide pattern matching, and
jumping to/from these switch extensions messes up the ${EXTEN} value,
which blows the minds of users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110035 | file | 2008-03-19 16:11:33 -0300 (Wed, 19 Mar 2008) | 4 lines
Add sanity checking for position resuming. We *have* to make sure that the position does not exceed the total number of files present, and we have to make sure that the position's filename is the same as previous. These values can change if a music class is reloaded and give unpredictable behavior.
(closes issue #11663)
Reported by: junky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
can handle
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
instead of trying to piece it together, badly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
*both* URI and method, so that POST support can move into a module; move http.c's private function prototypes into _private.h
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12211, closes issue #12209)
Reported by: sylvain
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
interpreted as format strings. Most of these changes are solely to make compiling with -Wsecurity and -Wformat=2 happy, and were not
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109309 | murf | 2008-03-18 00:37:15 -0600 (Tue, 18 Mar 2008) | 17 lines
(closes issue #11903)
Reported by: atis
Many thanks to atis for spotting this problem and reporting it.
The fix was to straighten out how items are placed on and removed
from the file stack. Regressions as well as the provided test case
helped to straighten out all code paths. valgrind was used to make
sure all memory allocated was freed.
Sorry for not solving this earlier. I got distracted.
Added the ntest23 regression test, which is mainly a copy of ntest22,
but with a few juicy errors thrown in, to replicate the kind of
error that atis spotted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108682 | qwell | 2008-03-14 09:29:05 -0500 (Fri, 14 Mar 2008) | 4 lines
Fix a potential segfault if chan (or chan->music_state) is NULL.
Closes issue #12210, credit to edantie for pointing this out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
server and client usage.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
caching would not work properly for users.conf and any other file read from
more than one place. I needed to add the filename which requested the config
file to get it to work properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r107352 | kpfleming | 2008-03-11 06:04:29 -0500 (Tue, 11 Mar 2008) | 11 lines
fix up various compiler warnings found with gcc-4.3:
- the output of flex includes a static function called 'input' that is not used, so for the moment we'll stop having the compiler tell us about unused variables in the flex source files (a better fix would be to improve our flex post-processing to remove the unused function)
- main/stdtime/localtime.c makes assumptions about signed integer overflow, and gcc-4.3's improved optimizer tries to take advantage of handling potential overflow conditions at compile time; for now, suppress these optimizations until we can fiure out if the code needs improvement
- main/udptl.c has some references to uninitialized variables; in one case there was no bug, but in the other it was certainly possibly for unexpected behavior to occur
- main/editline/readline.c had an unused variable
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
channel, we now print an error that makes sense
given our removal of deadagi as an actual application.
(closes issue #12161)
Reported by: explidous
Patches:
res_agi_12161.patch uploaded by juggie (license 24)
Tested by: juggie
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12112)
Reported by: cyrenity
Patches:
res_config_ldap.patch-03-03-2008 uploaded by cyrenity (license 416)
Tested by: cyrenity, Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #11236)
Reported by: philipps
Patches:
20080218__bug11236.diff.txt uploaded by Corydon76 (license 14)
Tested by: philipps
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
usernmae= setting in users.conf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105572 | qwell | 2008-03-03 12:06:52 -0600 (Mon, 03 Mar 2008) | 7 lines
Fix types for astNumChannels and astConfigCallsProcessed.
(closes issue #12114)
Reported by: jeffg
Patches:
12114.patch uploaded by jeffg (license 192)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105326 | phsultan | 2008-02-29 15:47:10 +0100 (Fri, 29 Feb 2008) | 1 line
Fix a potential memory leak
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
done inside iks_delete), thus making the code conform with coding guidelines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
type subscribed.
(closes issue #12066)
Reported by: ffadaie
Patches:
branch-1.4-12066-1.diff uploaded by phsultan (license 73)
trunk-12066-1.diff uploaded by phsultan (license 73)
Tested by: ffadaie, phsultan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104536 | file | 2008-02-27 11:52:02 -0400 (Wed, 27 Feb 2008) | 4 lines
Only stop the MWI monitor thread if it was actually started.
(closes issue #12086)
Reported by: francesco_r
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the libsnmp package.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104301 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
automatically generated file like it used to be. This still needs to be there
for modules that have to check it to compile against multiple asterisk versions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104119 | russell | 2008-02-25 18:25:29 -0600 (Mon, 25 Feb 2008) | 33 lines
Merge changes from team/russell/smdi-1.4
This commit brings in a significant set of changes to the SMDI support in Asterisk.
There were a number of bugs in the current implementation, most notably being that
it was very likely on busy systems to pop off the wrong message from the SMDI message
queue. So, this set of changes fixes the issues discovered as well as introducing
some new ways to use the SMDI support which are required to avoid the bugs with
grabbing the wrong message off of the queue.
This code introduces a new interface to SMDI, with two dialplan functions. First,
you get an SMDI message in the dialplan using SMDI_MSG_RETRIEVE() and then you access
details in the message using the SMDI_MSG() function. A side benefit of this is that
it now supports more than just chan_zap.
For example, with this implementation, you can have some FXO lines being terminated
on a SIP gateway, but the SMDI link in Asterisk.
Another issue with the current implementation is that it is quite common that the
station ID that comes in on the SMDI link is not necessarily the same as the Asterisk
voicemail box. There are now additional directives in the smdi.conf configuration
file which let you map SMDI station IDs to Asterisk voicemail boxes.
Yet another issue with the current SMDI support was related to MWI reporting over
the SMDI link. The current code could only report a MWI change when the change
was made by someone calling into voicemail. If the change was made by some other
entity (such as with IMAP storage, or with a web interface of some kind), then the
MWI change would never be sent. The SMDI module can now poll for MWI changes if
configured to do so.
This work was inspired by and primarily done for the University of Pennsylvania.
(also related to issue #9260)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
warnings that stops the compile. They are fixed now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104073 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12048)
Reported by: bukaj
Patches:
20080222__bug12048.diff.txt uploaded by Corydon76 (license 14)
Tested by: bukaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
message, and revert the original
logic on the if statement. Thanks to Juggie for bringing this to my attention.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104025 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'h' extension since it is well-known that it will be running in dead mode.
(closes issue #12046)
Reported by: explidous
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12034)
Reported by: kowalma
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #11996)
Patches:
bug_11996_doxygen.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103668 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
2. Add a duration parameter to MusicOnHold
(closes issue #11904)
Reported by: dimas
Patches:
v2-moh.patch uploaded by dimas (license 88)
Tested by: dimas
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
integer. Modify calls to various ast_*_flag macros accordingly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_verb
(closes issue #11934)
Reported by: mvanbaak
Patches:
20080205_astverb-2.diff.txt uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@102525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r102378 | file | 2008-02-05 11:09:29 -0400 (Tue, 05 Feb 2008) | 4 lines
Perform dialing asynchronously when using the originate CLI command so the CLI does not appear to block.
(closes issue #11927)
Reported by: bbhoss
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@102379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #11889)
Reported by: jmls
Patches:
res_config_curl.patch uploaded by jmls (license 141)
Tested by: jmls
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101531 | mmichelson | 2008-01-31 15:00:24 -0600 (Thu, 31 Jan 2008) | 10 lines
1. Prevent the addition of an extra '/' to the beginning of an absolute pathname.
2. If ast_monitor_change_fname is called and the new filename is the same as the old, then exit early and don't set the
filename_changed field in the monitor structure. Setting it in this case was causing ast_monitor_stop to erroneously
delete them.
(closes issue #11741)
Reported by: garlew
Tested by: putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100138 | qwell | 2008-01-24 10:41:29 -0600 (Thu, 24 Jan 2008) | 6 lines
Fix compilation on Solaris.
(closes issue #11832)
Patches:
bug-11832.diff uploaded by snuffy (license 35)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
