| Age | Commit message (Collapse) | Author |
|---|
|
section."
|
|
|
|
|
|
Adds the ability to receive and handle incoming NACK requests if
retransmissions are enabled. If retransmissions are enabled, a data
buffer is allocated that stores packets being sent. If a NACK request
is received, the packet requested for retransmission is sent if it is
still in the buffer. In the same request, if any of the following 16
packets are marked as not received, those will be sent as well if
available, as outlined in RFC4585.
Also changes RTCP RR and SR to use media source SSRC instead of packet
source SSRC when determining which instance to use for RTCP reports.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27806 #close
Change-Id: I7f7f124af3b9d5d2fd9cffc6ba8cb48a6fff06ec
|
|
Use of extended stringfields is a temporary mechanism to avoid ABI
breakage in released branches without resorting to more inconvienient
methods.
* Collect existing extended stringfields into the parent stringfield
section of the struct.
Change-Id: I8d46d037801b4518837c3ea4b6df95ceadc9436b
|
|
|
|
|
|
|
|
This reverts a problem introduced by the fix for ASTERISK_24329.
Now, when an announcement is played while waiting in a queue, music on
hold will not restart from the beginning of the sound file and will
instead pick up where it left off. However, the incorrect behavior in
ASTERISK_24329 is now present again; if an announcement X seconds
long is played when music on hold starts, music on hold will start X
seconds into the file.
ASTERISK-27774 #close
Reported by: lvl
Change-Id: I86b2885ee7063268f9b9747eddb788336ade989b
|
|
When a scheduled task is created you can pass in the
AST_SIP_SCHED_TASK_TRACK flag. This new flag causes scheduling events to
be logged.
Change-Id: I91967eb3d5a220915ce86881a28af772f9a7f56b
|
|
ast_sip_push_task_synchronous() did not necessarily execute the passed in
task under the specified serializer. If the current thread is any
registered pjsip thread then it would execute the task immediately instead
of under the specified serializer. Reentrancy issues could result if the
task does not execute with the right serializer.
The original reason ast_sip_push_task_synchronous() checked to see if the
current thread was a registered pjsip thread was because of a deadlock
with masquerades and the channel technology's fixup callback
(ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356)
involving call pickups avoided the original deadlock situation entirely.
The PJSIP channel technology's fixup callback no longer needed to call
ast_sip_push_task_synchronous().
However, there are a few places where this unexpected behavior is still
required to avoid deadlocks. The pjsip monitor thread executes callbacks
that do calls to ast_sip_push_task_synchronous() that would deadlock if
the task were actually pushed to the specified serializer. I ran into one
dealing with the pubsub subscriptions where an ao2 destructor called
ast_sip_push_task_synchronous().
* Split ast_sip_push_task_synchronous() into
ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
ast_sip_push_task_wait_servant() has the old behavior of
ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has
the new behavior where the task is always executed by the specified
serializer or a picked serializer if one is not passed in. Both functions
behave the same if the current thread is not a SIP servant.
* Redirected ast_sip_push_task_synchronous() to
ast_sip_push_task_wait_servant() to preserve API for released branches.
ASTERISK_26806
Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3
|
|
* Fix the periodic interval wander because it may take significant time
between the sched thread queueing the task in the serializer and the
serializer actually executing the task. The time it takes to actually
execute the task was already taken into account.
* Pass a schtd ref to the serializer when we queue a scheduled task on
the serializer. We don't want it going away on us while it is in the
serializer queue.
* Skip the scheduled task if the task was canceled between queueing the
task to the serializer and the serializer actually executing the task.
* Reorder struct ast_sip_sched_task to avoid unnecessary padding. Removed
task_id and added next_periodic.
* Hold a ref to the passed in serializer so the serializer cannot go away
on the scheduled task.
ASTERISK_26806
Change-Id: I6c8046b75f6953792c8c30e55b836a4291143f24
|
|
* A side benefit is that the scheduled tasks are not completely blocked
while the CLI command executes.
* Adjusted the "Task Name" column width to have more room for longer
names.
Change-Id: Iec64aa463ee8b10eef90120e00c38b1fb444087e
|
|
|
|
|
|
It now appends the external IP address on the
o= line of the SDP packet. The decision was made to write
the numeric IP address as opposed to the RFC that states
the FQDN should be used if and when available. We believe
the usage of literal IP address will help avoid
potential problems.
ASTERISK-27614 #close
Change-Id: I84f3360f3606b8c4e8d161edb228799ec0b8a302
|
|
This patch adds support to send in-dialog SIP NOTIFY commands on
chan_pjsip channels, similar to the functionality recently added
for chan_sip (ASTERISK_27461).
This extends res_pjsip_notify to allow for in-dialog messages.
ASTERISK-27697
Change-Id: If7f3151a6d633e414d5dc319d5efc1443c43dd29
|
|
ConfBridge"
|
|
* Removed several invalid uses of OBJ_NOLOCK. These uses resulted in the
'tasks' container being accessed without a lock in a multi-threaded
environment. A recipe for crashes.
* Removed needlessly obtaining schtd object references. If the caller
providing you a pointer to an object doesn't have a valid reference then
you cannot safely get one from it.
* Getting a ref to 'tasks' when you aren't copying the pointer into
another location is useless. The 'tasks' container pointer is global.
* Removed many unnecessary uses of RAII_VAR.
* Make ast_sip_schedule_task() name parameter const.
ASTERISK_26806
Change-Id: I5c62488e651314e2a1dbc01f5b078a15512d73db
|
|
|
|
|
|
|
|
There is a problem when an INVITE-with-Replaces transfer targets a channel
in a ConfBridge. The transfer will unconditionally swap out the
ConfBridge channel. Unfortunately, the ConfBridge state will not be aware
of this change. Unexpected behavior will happen as a result since
ConfBridge channels currently can only be replaced by a masquerade and not
normal bridge channel moves.
* We just need to pretend that the channel isn't in a bridge (like other
transfer methods already do) so the transfer channel will masquerade into
the ConfBridge channel.
Change-Id: I209beb0e748fa4f4b92a576f36afa8f495ba4c82
|
|
This change allows chan_pjsip to be given an AST_FRAME_RTCP
containing REMB feedback and pass it to res_rtp_asterisk.
Once res_rtp_asterisk receives the frame a REMB RTCP feedback
packet is constructed with the appropriate contents and sent
to the remote endpoint.
ASTERISK-27776
Change-Id: Ic53f821c1560d8924907ad82c4d9c0bc322b38cd
|
|
The minimum block word length is actually 4, not 5.
Change-Id: I878542218225aed72c72bdf1b856fc822cd2d649
|
|
The previous payload specific feedback handling was very single
minded in that it just assumed everything should trigger a video
update. This was changed but the handling of picture loss indication
was not added. The result was that video may not flow. This change
adds it explicitly in.
Change-Id: I1894be02e39ee10a0af841b5a1dca5f0ec7d60b6
|
|
Change-Id: I3811de0014b1ffe96d4a3b49cddd5d4ca02ee5d4
|
|
Fix some timer heap initializations and cancels to try and prevent
crashes and timer heap issues.
Change-Id: I64885d190fa22097d1b55987091375541e57a7ee
|
|
A deadlock can happen when the PJSIP monitor thread is shutting down a
connection oriented transport (TCP/TLS) used by a subscription at the same
time as another thread tries to send something for that subscription. The
deadlock is between the pjsip monitor thread attempting to get the dialog
lock and another thread sending something for that dialog when it tries to
get the transport manager lock.
* res_pjsip_pubsub.c: Avoid the deadlock by pushing the subscription
removal to the subscription serializer.
* res_pjsip_registrar.c: Pushed off incoming registration contact removals
to a default serializer as a precaution. Removing the contacts involves
sorcery access which in this case will involve database access. Depending
upon the setup, the database may not be on the same machine and could take
awhile. We don't want to hold up the pjsip monitor thread with
potentially long access times.
ASTERISK-27706
Change-Id: I56b647aea565f24dba33e9e5ebeed4cd3f31f8c4
|
|
|
|
Apparently it is possible for the transport to be destroyed without
triggering the transport callback logic. As a result the transport gets
destroyed and we have a stale pointer in the active_transports container.
* Invoke the transport monitor callback checks when the transport is
destroyed in addition to when it is disconnected and shutdown.
ASTERISK-27688
Change-Id: Ia9b5469fea8f2b3f2d8476fae6b748a4d23e7261
|
|
This change extends the existing AST_FRAME_RTCP frame type to be
able to contain additional RTCP message types, such as feedback
messages. The payload type is contained in the subclass which allows
knowing what is in the frame itself.
The RTCP feedback message type is now handled and REMB[1] messages
are raised with their containing information.
This also fixes a bug where all feedback messages were triggering
video updates instead of just FIR and FUR.
Finally RTCP frames are now passed up through the Asterisk core to
what is handling the channel, mapped appropriately in the case of
bridging, and written to an outgoing stream. Since RTCP frames are
on a per-stream basis this is only done on multistream capable
channels.
[1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
ASTERISK-27758
ASTERISK-26366
Change-Id: I680da0ad8d5059d5e9655d896fb9d92e9da8491e
|
|
|
|
|
|
|
|
This change adds a property to RTP instances to indicate that
REMB support is enabled and that sending/receiving should be
passed through.
This also enables it on video RTP instances in PJSIP if
WebRTC support is enabled.
Finally the goog-remb extension is added to the SDP using
the rtcp-fb attribute to indicate our support for it.
Details about REMB can be found on the draft document for it:
https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I1902dda1c0882bd1a0d71b2f120684b44b97e789
|
|
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
|
|
ASTERISK-27741
Change-Id: I0aa59a54735c6d20b95c54db1bd095dbf93e7adf
|
|
|
|
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
|
|
|
|
|
|
|
|
media"
|
|
|
|
Since ASTERISK-27253, no symbols from the header srtp2/crypto_types.h are used
anymore. Therefore, its include statement can be removed. This allows to compile
Asterisk on platforms which do not offer this private header, like openSUSE.
ASTERISK-27733
Change-Id: I25c5cb8fa966043d1506ebef449e5a724412b4b6
|
|
|
|
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
|
|
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
|
|
ASTERISK-27554
Change-Id: If61c7faab7d2fa1031c056ed6268fe928e2391cf
|
