| Age | Commit message (Collapse) | Author |
|---|
|
contact_apply_handler calls ast_res_pjsip_find_or_create_contact_status
to force the creation of a contact_status object whenever a new
contact is added but it didn't unref the returned object.
Added an ao2_cleanup(status) to plug the leak.
ASTERISK-25141
Change-Id: Icc1401cae142855a1abc86ab5179dfb3ee861c40
Reported-by: Corey Farrell
|
|
Associated with ASTERISK-25131
Change-Id: Iefa3b2066cfd8b108a90d2dd4a64d92c3a195d33
|
|
ASTERISK-25131
Reported by: Richard Mudgett
Change-Id: I87c9c96ae4a8fe2bc8a0ddea6958a2ad9cefd8e3
|
|
|
|
|
|
|
|
When the remote peer requires authentication for in-dialog requests then
re-INVITEs to the peer cause the call to be disconnected and other
in-dialog requests to the peer like MESSAGE just don't go through.
* Made session_inv_on_tsx_state_changed() handle in-dialog authentication
for re-INVITEs and other methods. Initial INVITEs cannot be handled here
because the INVITE transaction must be restarted earlier.
* Pulled needed code from res/res_pjsip/pjsip_outbound_auth.c in
preparation for removing the file. The generic outbound authentication
code did not work as well as anticipated.
* Created outbound_invite_auth() to only handle initial outbound INVITEs.
Re-INVITEs cannot be handled here. The re-INVITE transaction is still in
progress and the PJSIP library cannot handle the overlapping INVITE
transactions. Other method types should not be handled here as this code
only works on outgoing calls and we need to handle incoming and outgoing
calls.
ASTERISK-25131 #close
Reported by: Richard Mudgett
Change-Id: I12bdd7ddccc819b4ce4b091e826d1e26334601b0
|
|
The loop to find the first available contact of an endpoint grabbed
contact from the iterator, then checked for offline state. This
caused the first contact after the state was found to leak a reference.
ASTERISK-25141
Change-Id: Id0f1d87410fc63742db0594eb4b18b36e99aec08
|
|
When permanent_uri_handler was creating the contact status
object for each contact, it wasn't unreffing it at the
end of the loop.
ASTERISK-25141 #close
Reported-by: Corey Farrell
Change-Id: I7bb127994677bb3d459f87952f8425c9b9967b12
|
|
This change adds the following CLI commands and AMI actions:
sorcery memory cache show
sorcery memory cache dump
sorcery memory cache expire
sorcery memory cache stale
SorceryMemoryCacheExpire
SorceryMemoryCacheExpireObject
SorceryMemoryCacheStale
SorceryMemoryCacheStaleObject
These allow both examination and manipulation of sorcery memory
caches from external sources.
Cached objects can be explicitly expired from a cache or marked
as stale. If expired they are immediately removed. If marked as
stale they will be background refreshed when next retrieved.
ASTERISK-25067
Reported by Matt Jordan
Change-Id: I68e03cfd8c34b5e07f4b6ee4fd93a3f4a00a3d9e
|
|
|
|
This change introduces a check of object_lifetime_stale when retrieving
cached objects. If the amount of time the object has been in the cache
exceeds the lifetime, then a task is scheduled to update the cached
object based on an object retrieved from other sorcery wizards instead.
To prevent the cached object from being retrieved during a refresh,
thread-local storage is used to mark the thread as being a stale object
update. This results in the cache returning no object, leading to
sorcery querying other wizards for the object instead.
A test has been added for stale objects as well. This test ensures that
stale objects are retrieved the same as freshly-cached objects. The test
also ensures that after an object is stale, changes in the backend are
reflected in the cache, to include if the object has been deleted from
the backend.
ASTERISK-25067
Reported by Matt Jordan
Change-Id: I9bd7c049adf6939bfe2899f393c2bfbbf412d217
|
|
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
Use function PQescapeStringConn for escaping the name of the table and
schema instead of doing it manually.
ASTERISK-25132 #close
Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>
Change-Id: I302a263f7210d20925f14716b508b081998b7608
|
|
|
|
Incoming SIP packets larger than PJSIP_MAX_PKT_LEN were themselves
truncated before passing to pjsip_tpmgr_receive_packet, but the length
was passed unaltered, thus causing memory corruption and segfault.
ASTERISK-25122 #close
Change-Id: I608a6b6b7f229eacc33a0a7d771d18e27e5b08ab
|
|
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
|
|
In addition to specifying lists of 'presence' and 'message-summary',
users can also create lists of type 'dialog'. These should be treated in
the same fashion as 'presence'.
Change-Id: I583bb69cd9f88b0b29bf09ddaddeac4e84189f6e
|
|
When a SUBSCRIBE request is made to a dialplan hint that doesn't exist,
the current NOTICE message informing users of this swaps the context and
extension parameters. This can cause a bit of confusion.
Thanks to CptBurger in #asterisk for helping to point this out.
Change-Id: Ie584d1a58ae217385c87a450ca25b55ca0e36e43
|
|
|
|
Prior to this patch, when a WebSocket connection is made, ARI would not
be informed of the connection until after the WebSocket layer had
accepted the connection. This created a brief race condition where the
ARI client would be notified that it was connected, a channel would be
sent into the Stasis dialplan application, but ARI would not yet have
registered the Stasis application presented in the HTTP request that
established the WebSocket.
This patch resolves this issue by doing the following:
* When a WebSocket attempt is made, a callback is made into the ARI
application layer, which verifies and registers the apps presented in
the HTTP request. Because we do not yet have a WebSocket, we cannot
have an event session for the corresponding applications. Some
defensive checks were thus added to make the application objects
tolerant to a NULL event session.
* When a WebSocket connection is made, the registered application is
updated with the newly created event session that wraps the WebSocket
connection.
ASTERISK-24988 #close
Reported by: Joshua Colp
Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636
|
|
|
|
|
|
|
|
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
This makes the "object_lifetime_maximum" option operational.
On the addition of an object to an empty memory cache a scheduled
task is created which, when invoked, expires objects from the cache
which have exceeded their lifetime. If more objects have been added
the remaining life of the oldest object is used to schedule the
next invocation of the scheduled task.
If the oldest object is removed from the cache before it can be
expired automatically the scheduled task is cancelled, if possible,
and the lifetime of the next oldest is used to schedule the task.
If during these two operations no additional objects exist in the
cache then no task is scheduled.
An additional unit test has been added which verifies this
functionality.
ASTERISK-25067
Reported by: Matt Jordan
Change-Id: I87409674674a508e7717ee20739ca15cec6ba7b6
|
|
When an inbound call is received the To header is checked
for the "line" option. Some remote servers will place this
in the request URI instead. This adds an additional check for
the option in the request URI.
ASTERISK-25072 #close
Reported by: Dmitriy Serov
Change-Id: Id4e44debbb80baad623b914a88574371575353c8
|
|
This makes the "maximum_objects" option operational.
A heap has been added alongside the hash table in the cache. When
objects are added to the cache, they are also added to the heap.
Similarly, when objects are removed from the cache, they are removed
from the heap.
The heap's use comes into play when an item is to be added to a "full"
cache. When the cache is full, the oldest item is removed from the
cache, using the heap to determine the oldest item.
A unit test has been added that verifies that the maximum_objects option
works as expected and that the oldest object is removed from the cache
when an object beyond the maximum is added.
ASTERISK-25067 #close
Reported by Matt Jordan
Change-Id: I490658830e9c4cbf0b3051e4cdc4913cf9f1b73a
|
|
This change adds a basic res_sorcery_memory_cache module which implements
configuration option parsing, configuration file parsing for threading,
sorcery interface implementation, and unit tests.
Objects can be added, updated, deleted, and retrieved from the memory
cache. Automatic expiration and stale handling will be added in the
future.
Note that unit tests exist within the module itself in case the
threading done as a result of expiration results in asynchronous
actions (which it likely will). Providing access and a notification
mechanism for an external test module would be complicated and
not worth it.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: Id8a6a357ef5a83d466f81eee56a67d13eeb118b9
|
|
Use ast_manager_register_xml for res_mwi_external_ami manager
actions. This ensures the module is held open while any of
the actions are being run.
ASTERISK-25117 #close
Reported by: Corey Farrell
Change-Id: Iececfdc2da498b2c32b9e09042f5f12292007ac7
|
|
This patch updates http_websocket and its corresponding implementation
with a pre-session established callback. This callback allows for
WebSocket server consumers to be notified when a WebSocket connection is
attempted, but before we accept it. Consumers can choose to reject the
connection, if their application specific logic allows for it.
As a result, this patch pulls out the previously private
websocket_protocol struct and makes it public, as
ast_websocket_protocol. In order to preserve backwards compatibility
with existing modules, the existing APIs were left as-is, and new APIs
were added for the creation of the ast_websocket_protocol as well as for
adding a sub-protocol to a WebSocket server.
In particular, the following new API calls were added:
* ast_websocket_add_protocol2 - add a protocol to the core WebSocket
server
* ast_websocket_server_add_protocol2 - add a protocol to a specific
WebSocket server
* ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
Consumers can populate this with whatever callbacks they wish to
support, then add it to the core server or a specified server.
ASTERISK-24988
Reported by: Joshua Colp
Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2
|
|
ASTERISK-25110 #close
Reported by: John Bigelow
Change-Id: I99a9d93f066f265357b647b8e99a75e45da5a39f
|
|
This patch fixes a number of errors and warning messages in the doxygen
log. Specifically, it addresses:
* A number of files incorrectly places a '\brief' tag immediately after
a '\file' tag. Doing so emits a warning, as '\file' takes an optional
argument specifying which file the doxygen comment is for. As '\brief'
is not a file, doxygen was unamused.
* A grouping of Stasis Topics and Messages in rtp_engine.h was
incorrectly terminated. We now correctly terminate the grouping, which
prevents members of rtp_engine.h from showing up in the wrong group.
* Group indicators which are not part of the Stasis Topics and Messages
group were removed. Group indicators without an \addtogroup or
\ingroup have no meaning.
Change-Id: Ia1415ffec6767e27233ae1cae5ed5970de5656d4
|
|
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
|
|
|
|
macro."
|
|
There are 3 ways that calls directly to standard allocator functions can
be dealt with:
1. Block their use, cause them to generate an error. This is the default.
2. Replace them with the Asterisk equivalent function calls.
3. Leave them alone.
This change allows one of these 3 options to be selected by any source.
The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
or ASTMM_IGNORE to use option 1, 2 or 3 respectively. Normally ASTMM_BLOCK
is the correct option, so it is default when ASTMM_LIBC is not defined.
In some cases when building 3rd party code it is desirable to have it use
Asterisk functions, without changing the whole source - ASTMM_REDIRECT
accomplishes this. When using 3rd party libraries sometimes a static
inline function will make use of malloc or free. In these cases it may
be unsafe to replace the allocator in the header, as it's possible the
memory could be freed by the library using standard allocators. For
those cases ASTMM_IGNORE is needed.
Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7
|
|
Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
|
|
packet is DTLS."
|
|
|
|
First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.
Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31
|
|
astmm.h includes defines that are meant to cause error's when standard
allocators (malloc, calloc, free, etc) are used. It actually only
causes a warning, which is not always caught on certain sources. In
modules this unknown symbol is not detected until runtime, where the
module fails to load. This modifies the define's so that using one
of the blocked functions will cause a compile error regardless of
CFLAGS.
Moved spandsp header includes to before asterisk.h so the static inline
functions can continue using malloc and free. Although these functions
are never called and optimized away, the updated replacement macro's
would still cause a failure.
Change-Id: I532640aca0913ba9da3b18c04a0f010ca1715af5
|
|
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
|
|
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
|
|
* changes:
CLI: Enable automatic references to modules.
Modules: Make ast_module_info->self available to auxiliary sources.
|
|
Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.
Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.
ASTERISK-24938 #closes
Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60
|
|
|
|
|
|
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
|
|
* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
the reference when complete.
ASTERISK-25049 #close
Reported by: Corey Farrell
Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3
|
