Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
|
|
|
|
The stasis_app_playback and stasis_app_recording structs need to have a
struct stasis_app_control ref. Other threads can get a reference to the
playback and recording structs from their respective global container.
These other threads can then use the control pointer they contain after
the control struct has gone.
* Add control ref to stasis_app_playback and stasis_app_recording structs.
With the refs added, the control command queue can now have a circular
control reference which will cause the control struct to never get
released if the control's command queue is not flushed when the channel
leaves the Stasis application. Also the command queue needs better
protection from adding commands if the control->is_done flag is set.
* Flush the control command queue on exit.
ASTERISK-25882 #close
Change-Id: I3cf1fb59cbe6f50f20d9e35a2c07ac07d7f4320d
|
|
* Give the struct stasis_app_control ao2 object a ref to the channel held
in the object. Now the channel will still be around if a thread needs to
post a stasis message instead of crash because the topic was destroyed.
* Moved stopping any lingering silence generator out of the struct
stasis_app_control destructor and made it a part of exiting the Stasis
application. Who knows which thread the destructor will be called under
so it cannot affect the channel's silence generator. Not only was the
channel unprotected when the silence generator was stopped, stasis may no
longer even control the channel.
ASTERISK-25882
Change-Id: I21728161b5fe638cef7976fa36a605043a7497e4
|
|
Change-Id: Ifadc469590bd4d5368e19d3763db3bd1f80fdb95
|
|
The only caller of ari_bridges_play_found() has this note:
If ari_bridges_play_found fails because the channel is unavailable for
playback, The channel will be removed from the playback list soon. We can
keep trying to get channels from the list until we either get one that
will work or else there isn't a channel for this bridge anymore, in which
case we'll revert to ari_bridges_play_new.
Change-Id: Ib068141b367ccaa17be0dab4181c98e26c5127d6
|
|
Change-Id: Ic7d93c402c498677a122505558859c853d4e5ac7
|
|
Background:
If your extension is 1000 and the voicemail access extension is 1571 and you
dial 1571, usually a dialplan rule calls voicemailmain with your extension and
you are placed directly in your mailbox. Therefore most admins program the
voicemail (or other speed dial) button on their phones to the access extension.
Some phones (Snom at least) use whatever is programmed there to also subscribe
for MWI and so can't dial one number and subscribe to another. This works fine
in chan_sip because chan_sip completely ignores the user portion of the
SUBSCRIBE message request URI. If it can match the peer, is subscribes to the
peer's mailbox. The user could be set to anything or nothing and you'd still
get subscribed to your mailbox.
Issue:
chan_pjsip actually uses the user portion of the URI to find an aor and its
mailboxes. Therefore a subscribe to 1571 results in a 404. Sure, you can
create an aor for 1571 but you certainly can't add your entire voicemail
system's mailboxes to it and everyone would get notified of every MWI.
Solution:
When an MWI subscribe comes in and an aor can't be found that matches the
resource directly, check the resource against the endpoint's aors. If an aor
is found that has a voicemail_extension that matches the resource, use it.
ASTERISK-25865
Reported-by: Ross Beer
Change-Id: I770ea185f751f1ada888fafb4b452115f1c06e9e
|
|
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
|
|
|
|
Commit 1bce690ccb36a4744a327c07af23a9a3a0fa20cd was incrementing txcount
for rtcp packets as well as rtp packets and that was causing sender reports
to be generated instead of receiver reports in cases where no rtp was actually
being sent.
Moved the txcount increment from __rtp_sento, which handles both rtp and rtcp,
to rtp_sento which only handles rtp packets.
Discovered by the hep/rtcp-receiver test.
Change-Id: Ie442e4bb947a68847a676497021ba10ffaf376d5
|
|
Added the ability to show channel statistics to chan_pjsip (cli_functions.c)
Moved the existing 'pjsip show channel(s)' functionality from
pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's
private header so it made sense to move the existing channel commands as well.
Now using stasis_cache_dump to get the channel snapshots rather than retrieving
all endpoints, then getting each one's channel snapshots. Much more efficient.
Change-Id: I03b114522126d27434030b285bf6d531ddd79869
|
|
|
|
|
|
Asterisk uses separate UDP ports for RTP and RTCP traffic and RFC 5764
explicitly states:
There MUST be a separate DTLS-SRTP session for each distinct pair of
source and destination ports used by a media session
This means RTP keying material cannot be used for DTLS RTCP, which was
the reason why RTCP encryption would fail.
ASTERISK-25642
Change-Id: I7e8779d8b63e371088081bb113131361b2847e3a
|
|
|
|
rxcount, txcount, rxoctetcount and txoctetcount weren't being calculated
for bridged streams because the calulations were being done after the
bridged short-circuit. Actually, rxoctetcount wasn't ever being calculated.
Moved the calculations so they occur for all valid received packets and
all transmitted packets. Also added rxoctetcount and txoctetcount to
ast_rtp_instance_stat.
Change-Id: I08fb06011a82d38c3b4068867a615068fbe59cbb
|
|
No one seemed to notice but every time an OPTIONS goes out, it goes
out with a From of "asterisk" (or whatever the default from_user is set to),
even if you specify an endpoint.
The issue had several causes...
qualify_contact is only called with an endpoint if called from the CLI.
If the endpoint is NULL, qualify_contact only looks up the endpoint if
authenticate_qualify=yes. Even then, it never passes it on to
ast_sip_create_request where the From header is set. Therefore From
is always "asterisk" (or whatever the default from_user is set to).
Even if ast_sip_create_request were to get an endpoint, it only sets
the From if endpoint->from_user is set.
The fix is 4 parts...
First, create_out_of_dialog_request was modified to use the endpoint id
if endpoint was specified and from_user is not set.
Second, qualify_contact was modified to always look up an endpoint if
one wasn't specified regardless of authenticate_qualify. It then passes
the endpoint on to create_out_of_dialog_request.
Third (and most importantly), find_an_endpoint was modified to find
an endpoint by using an "aors LIKE %contact->aor%" predicate with
ast_sorcery_retrieve_by_fields. As such, this patch will only work
if the sorcery realtime optimizations patch goes in. Otherwise we'd
be pulling the entire endpoints database every time we send an OPTIONS.
Since we already know the contact's aor, the on_endpoint callback was also
modified to just check if the contact->aor is an exact match to one of
the endpoint's.
Finally, since we now have an endpoint for every OPTIONS request,
res_pjsip/endpt_send_request (which handles out-of-dialog reqests) was
updated to get the transport from the endpoint and set it on tdata.
Now the correct transport is used.
Change-Id: I2207e12bb435e373bd1e03ad091d82e5aba011af
|
|
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
|
|
|
|
|
|
Blind transfers to a recognized parking extension need to use the parker's
channel variable values to create the dynamic parking lot. This is
because there is always only one parker while the parkee may actually be a
multi-party bridge. A multi-party bridge can never supply the needed
channel variables to create the dynamic parking lot. In the multi-party
bridge blind transfer scenario, the parker's CHANNEL(parkinglot) value and
channel variables are inherited by the local channel used to park the
bridge.
* In park_common_setup(), make use the parker instead of the parkee to
supply the dynamic parking lot channel variable values. In all but one
case, the parkee is the same as the parker. However, in the recognized
parking extension blind transfer scenario for a two party bridge they are
different channels. For consistency, we need to use the parker channel.
* In park_local_transfer(), pass the CHANNEL(parkinglot) value to the
local channel when blind transferring a multi-party bridge to a recognized
parking extension.
* When a local channel starts a call, the Local;2 side needs to inherit
the CHANNEL(parkinglot) value from Local;1.
The DTMF one-touch parking case wasn't even trying to create dynamic
parking lots before it aborted the attempt.
* In parking_park_call(), add missing code to create a dynamic parking
lot.
A DTMF bridge hook is documented as returning -1 to remove the hook.
Though the hook caller is really coded to accept non-zero. See the
ast_bridge_hook_callback typedef.
* In feature_park_call(), don't remove the DTMF one-touch parking hook
because of an error.
ASTERISK-24605 #close
Reported by: Philip Correia
Patches:
call_park.patch (license #6672) patch uploaded by Philip Correia
Change-Id: I221d3a8fcc181877a1158d17004474d35d8016c9
|
|
Change-Id: I8f7a8890aef27824301c642d4d15407ac83e6f02
|
|
res/parking/parking_applications.c:
* Add malloc fail checks in setup_park_common_datastore().
* Fix playing parking failed announcement to only happen on non-blind
transfers in park_app_exec(). It could never go out before because a test
was provedly always false.
res/parking/parking_bridge.c:
* Fix NULL tolerance in generate_parked_user() because
bridge_parking_push() can theoretically pass a NULL parker channel if the
parker channel went away for some reason.
* Clarify some weird code dealing with blind_transfer in
bridge_parking_push().
res/parking/parking_bridge_features.c:
* Made park_local_transfer() set BLINDTRANSFER on the Local;1 channel
which will be bulk copied to the Local;2 channel on the subsequent
ast_call(). The additional advantage is if the parker channel has the
BLINDTRANSFER and ATTENDEDTRANSFER variables set they are now guaranteed
to be overridden.
res/parking/parking_manager.c:
* Fix AMI Park action input range checking of the Timeout header in
manager_park().
* Reduced locking scope to where needed in manager_park().
res/res_parking.c:
* Fix some off nominal missing unlocks by eliminating the returns.
Change-Id: Ib64945bc285acb05a306dc12e6f16854898915ca
|
|
* Remove duplicate res_parking.conf courtesytone config option
documentation.
ASTERISK-24596 #close
Reported by: Philip Correia
ASTERISK-24605
Reported by: Philip Correia
Patches:
call_park_app_doc.patch (license #6672) patch uploaded by Philip Correia
Change-Id: I90a92a891c6494dc08173e675856afcc4764c5b5
|
|
database."
|
|
The configuration unsigned integer option handler sets flags for the
parser as if the option should be a signed integer (PARSE_INT32),
leading to errors on "out of range" values. Fix flags (PARSE_UINT32).
A fix to res_pjsip is also present which stops invalid flags from
being passed when registering sorcery object fields for qualify
status.
ASTERISK-25612 #close
Change-Id: I96b539336275e0e72a8e8033487d2c3344debd3e
|
|
The log message when a MusicOnHold music class was not found was changed
from debug level to WARNING level in Asterisk 11.19 and 13.5. For those
using realtime musiconhold, this message is wrong because it warns
before checking the database.
This changeset delays the warning until after the database has been
checked.
Reported-by: Conrad de Wet
ASTERISK-25444 #close
Change-Id: I6cfb2db2f9cfbd2bb3d30566ecae361c4abf6dbf
|
|
This patch adds a bucket backend for the core media cache that interfaces to a
remote HTTP server. When a media item is requested in the cache, the cache will
query its bucket backends to see if they can provide the media item. If that
media item has a scheme of HTTP or HTTPS, this backend will be invoked.
The backend provides callbacks for the following:
* create - this will always retrieve the URI specified by the provided
bucket_file, and store it in the file specified by the object.
* retrieve - this will pull the URI specified and store it in a temporary
file. It is then up to the media cache to move/rename this file
if desired.
* delete - destroys the file associated with the bucket_file.
* stale - if the bucket_file has expired, based on received HTTP headers from
the remote server, or if the ETag on the server no longer matches
the ETag stored on the bucket_file, the resource is determined to be
stale.
Note that the backend respects the ETag, Expires, and Cache-Control headers
provided by the HTTP server it is querying.
ASTERISK-25654
Change-Id: Ie201c2b34cafc0c90a7ee18d7c8359afaccc5250
|
|
The "Refer-to" header of an incoming REFER request is parsed by
pjsip_parse_uri(). That function requires the URI parameter to be NULL
terminated. Unfortunately, the previous code added the NULL terminator by
overwriting memory that may not be safe. The overwritten memory results
could be benign, memory corruption, or a segmentation fault. Now the URI
is NULL terminated safely by copying the URI to a new chunk of memory with
the correct size to be NULL terminated.
ASTERISK-25814 #close
Change-Id: I32565496684a5a49c3278fce06474b8c94b37342
|
|
setting."
|
|
|
|
Older versions of PJSIP do not have the proto field on the TLS transport
setting structure. This change adds a configure check so even if it is
not present we will still be able to build.
Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9
|
|
prohibited"
|
|
|
|
|
|
|
|
Configurations like "aors = a, b, c" were either ignoring everything after "a"
or trying to look up " b". Same for mailboxes, ciphers, contacts and a few
others.
To fix, all the strsep(©, ",") calls have been wrapped in ast_strip. To
facilitate this, ast_strip, ast_skip_blanks and ast_skip_nonblanks were
updated to handle null pointers.
In some cases, an ast_strlen_zero() test was added to skip consecutive commas.
There was also an attempt to ast_free an ast_strdupa'd string in
ast_sip_for_each_aor which was causing a SEGV. I removed it.
Although this issue was reported for realtime, the issue was in the res_pjsip
modules so all config mechanisms were affected.
ASTERISK-25829 #close
Reported-by: Mateusz Kowalski
Change-Id: I0b22a2cf22a7c1c50d4ecacbfa540155bec0e7a2
|
|
Change-Id: I265e4ac47c629c9a63dd86b59df82a7ab3c64384
|
|
Refactor and created function ast_cli_print_timestr_fromseconds to print
seconds formatted: year(s) week(s) day(s) hour(s) second(s)
This function now is used in addons/cdr_mysql.c,cdr_pgsql.c, main/cli.c,
res_config_ldap.c, res_config_pgsql.c.
Change-Id: Ibeb8634102cd11d3f8623398b279cb731bcde36c
|
|
|
|
Per RFC3325, the 'From' header is now anonymized on outgoing calls when
caller id presentation is prohibited.
TID = trust_id_outbound
PRO = Set(CALLERID(pres)=prohib)
USR = endpoint/from_user
DOM = endpoint/from_domain
PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)
Conditions |Result
--------------------|----------------------------------------------------
TID PRO USR DOM |PAI FROM
--------------------|----------------------------------------------------
Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi>
Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid>
Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi>
Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid>
Y N abc def.ghi |YES <sip:abc@def.ghi>
Y N abc |YES <sip:abc@<ip_address>>
Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi>
N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid>
N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi>
N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid>
N N abc def.ghi |YES <sip:abc@def.ghi>
N N abc |YES <sip:abc@<ip_address>>
N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
ASTERISK-25791 #close
Reported-by: Anthony Messina
Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9
|
|
During the transfer process, some phones (okay it was the Jitsi softphone,
but maybe others are out there) send a "bye" immediately after receiving a
SIP Notify. When a "bye" is received early for some types of transfers the
transferer channel may no longer be available during late stage transfer
processing.
For instance, during an attended transfer involving stasis bridging at one
point the created local channel looks for an associated swap channel in
order to retrieve the stasis application name. If the transferer has hung
up then the local channel will fail to find it. The local channel then has
no way to know which stasis app to enter, so it fails and hangs up as well.
Thus the transfer does not complete as expected.
This patch delays the sending of the initial notify in order to give the
transfer process enough time to gather the necessary data for a successful
transfer.
ASTERISK-25771
Change-Id: I09cfc9a5d6ed4c007bc70625e0972b470393bf16
|
|
PJSIP does not ensure that when printing the message body the
buffer will be NULL terminated. This is problematic when searching
for the signal and duration values of the DTMF.
This change ensures the buffer is always NULL terminated.
Change-Id: I52653a1a60c93092d06af31a27408d569cc98968
|
|
|
|
reason."
|
|
|