| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
|
|
When an inbound call is received the To header is checked
for the "line" option. Some remote servers will place this
in the request URI instead. This adds an additional check for
the option in the request URI.
ASTERISK-25072 #close
Reported by: Dmitriy Serov
Change-Id: Id4e44debbb80baad623b914a88574371575353c8
|
|
This makes the "maximum_objects" option operational.
A heap has been added alongside the hash table in the cache. When
objects are added to the cache, they are also added to the heap.
Similarly, when objects are removed from the cache, they are removed
from the heap.
The heap's use comes into play when an item is to be added to a "full"
cache. When the cache is full, the oldest item is removed from the
cache, using the heap to determine the oldest item.
A unit test has been added that verifies that the maximum_objects option
works as expected and that the oldest object is removed from the cache
when an object beyond the maximum is added.
ASTERISK-25067 #close
Reported by Matt Jordan
Change-Id: I490658830e9c4cbf0b3051e4cdc4913cf9f1b73a
|
|
This change adds a basic res_sorcery_memory_cache module which implements
configuration option parsing, configuration file parsing for threading,
sorcery interface implementation, and unit tests.
Objects can be added, updated, deleted, and retrieved from the memory
cache. Automatic expiration and stale handling will be added in the
future.
Note that unit tests exist within the module itself in case the
threading done as a result of expiration results in asynchronous
actions (which it likely will). Providing access and a notification
mechanism for an external test module would be complicated and
not worth it.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: Id8a6a357ef5a83d466f81eee56a67d13eeb118b9
|
|
Use ast_manager_register_xml for res_mwi_external_ami manager
actions. This ensures the module is held open while any of
the actions are being run.
ASTERISK-25117 #close
Reported by: Corey Farrell
Change-Id: Iececfdc2da498b2c32b9e09042f5f12292007ac7
|
|
This patch updates http_websocket and its corresponding implementation
with a pre-session established callback. This callback allows for
WebSocket server consumers to be notified when a WebSocket connection is
attempted, but before we accept it. Consumers can choose to reject the
connection, if their application specific logic allows for it.
As a result, this patch pulls out the previously private
websocket_protocol struct and makes it public, as
ast_websocket_protocol. In order to preserve backwards compatibility
with existing modules, the existing APIs were left as-is, and new APIs
were added for the creation of the ast_websocket_protocol as well as for
adding a sub-protocol to a WebSocket server.
In particular, the following new API calls were added:
* ast_websocket_add_protocol2 - add a protocol to the core WebSocket
server
* ast_websocket_server_add_protocol2 - add a protocol to a specific
WebSocket server
* ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
Consumers can populate this with whatever callbacks they wish to
support, then add it to the core server or a specified server.
ASTERISK-24988
Reported by: Joshua Colp
Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2
|
|
ASTERISK-25110 #close
Reported by: John Bigelow
Change-Id: I99a9d93f066f265357b647b8e99a75e45da5a39f
|
|
This patch fixes a number of errors and warning messages in the doxygen
log. Specifically, it addresses:
* A number of files incorrectly places a '\brief' tag immediately after
a '\file' tag. Doing so emits a warning, as '\file' takes an optional
argument specifying which file the doxygen comment is for. As '\brief'
is not a file, doxygen was unamused.
* A grouping of Stasis Topics and Messages in rtp_engine.h was
incorrectly terminated. We now correctly terminate the grouping, which
prevents members of rtp_engine.h from showing up in the wrong group.
* Group indicators which are not part of the Stasis Topics and Messages
group were removed. Group indicators without an \addtogroup or
\ingroup have no meaning.
Change-Id: Ia1415ffec6767e27233ae1cae5ed5970de5656d4
|
|
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
|
|
|
|
macro."
|
|
There are 3 ways that calls directly to standard allocator functions can
be dealt with:
1. Block their use, cause them to generate an error. This is the default.
2. Replace them with the Asterisk equivalent function calls.
3. Leave them alone.
This change allows one of these 3 options to be selected by any source.
The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
or ASTMM_IGNORE to use option 1, 2 or 3 respectively. Normally ASTMM_BLOCK
is the correct option, so it is default when ASTMM_LIBC is not defined.
In some cases when building 3rd party code it is desirable to have it use
Asterisk functions, without changing the whole source - ASTMM_REDIRECT
accomplishes this. When using 3rd party libraries sometimes a static
inline function will make use of malloc or free. In these cases it may
be unsafe to replace the allocator in the header, as it's possible the
memory could be freed by the library using standard allocators. For
those cases ASTMM_IGNORE is needed.
Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7
|
|
Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
|
|
packet is DTLS."
|
|
|
|
First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.
Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31
|
|
astmm.h includes defines that are meant to cause error's when standard
allocators (malloc, calloc, free, etc) are used. It actually only
causes a warning, which is not always caught on certain sources. In
modules this unknown symbol is not detected until runtime, where the
module fails to load. This modifies the define's so that using one
of the blocked functions will cause a compile error regardless of
CFLAGS.
Moved spandsp header includes to before asterisk.h so the static inline
functions can continue using malloc and free. Although these functions
are never called and optimized away, the updated replacement macro's
would still cause a failure.
Change-Id: I532640aca0913ba9da3b18c04a0f010ca1715af5
|
|
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
|
|
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
|
|
* changes:
CLI: Enable automatic references to modules.
Modules: Make ast_module_info->self available to auxiliary sources.
|
|
Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.
Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.
ASTERISK-24938 #closes
Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60
|
|
|
|
|
|
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
|
|
* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
the reference when complete.
ASTERISK-25049 #close
Reported by: Corey Farrell
Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3
|
|
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
|
|
|
|
Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be re-established before the negative connection cache
time is met.
ASTERISK-22708 #close
Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
|
|
Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options.
This extra space prevented any of the dependencies from being seen by
menuselect, so building with default options would fail if PJSIP was
not installed.
This also makes the tool that extracts information for menuselect
tolerant of multiple spaces in the future.
ASTERISK-25033 #close
Reported by: Peter Whisker
Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698
|
|
The res_ari_device_states module depends on res_stasis_device_state,
not res_stasis_device_states.
Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de
|
|
This patch has two main purposes:
1) Improve warning messages when ACLs are configured improperly.
2) Prevent misconfigured ACLs from allowing potentially unwanted
traffic.
To acomplish point (2) in most cases, whatever configuration object that
the ACL belonged to was not allowed to load.
The one exception is res_pjsip_acl. In that case, ACLs are their own
configuration object. Furthermore, the module loading code has no
indication that a ACL configuration had a failure. So the tactic taken
here is to create an ACL that just blocks everything.
ASTERISK-24969
Reported by Corey Farrell
Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae
|
|
When the PJSIP pjsip_regc_send function is invoked and an error
status returned the caller currently decrements the reference count
of the client state that it just incremented, assuming the
registration callback would not have been invoked. In practice
this is not correct. If the failure happens after the transaction
has been set up the callback will still be invoked. This will
cause the reference count to be incorrectly decremented twice, once
by the registration callback and second by the caller of
pjsip_regc_send.
This change makes it so that whether the callback is invoked or
not is known by the caller of pjsip_regc_send. Depending on
this it can know whether it is responsible for decrementing the
reference count of the client state or not.
ASTERISK-25037 #close
Reported by: Joshua Colp
Change-Id: I749dc12f3a22115c49c5d7d95ff42a5fa45319de
|
|
|
|
A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.
One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.
Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.
ASTERISK-24955 #close
Reported by: Matt Jordan
Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733
|
|
|
|
|
|
Odd behaviors have been observed during outbound registrations. The most
common problem witnessed has been one where a request with
authentication credentials cannot be created after receiving a 401
response. Other behaviors include apparently processing an incorrect SIP
response.
Inspecting the code led to an apparent issue with regards to how we
handle transactions in outbound registration code. When a response to a
REGISTER arrives, we save a pointer to the transaction and then push a
task onto the registration serializer. Between the time that we save the
pointer and push the task, it's possible for the transaction to be
destroyed due to a timeout. It's also possible for the address to be
reused by the transaction layer for a new transaction.
To allow for authentication of a REGISTER request to be authenticated
after the transaction has timed out, we now hold a reference to the
original REGISTER request instead of the transaction. The function for
creating a request with authentication has been altered to take the
original request instead of the transaction where the original request
was sent.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a
|
|
Change-Id: Ic8322f04e37842848ad72cf2871bd0378f67c4ac
|
|
AOR Sections Exist in pjsip.conf"
|
|
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
|
|
Remove incorrect MODULEINFO block and unneeded header includes
from presence_xml.c.
ASTERISK-25027
Reported by: Corey Farrell
Change-Id: I977c609ab9d1fe05373027c4138900f6985990eb
|
|
This switches files used to generate other sources to use the new
ASTERISK_REGISTER_FILE macro.
ASTERISK-25026 #close
Reported by: Corey Farrell
Change-Id: Ieb2537b83421cad07c8955e5f90c405ccf079740
|
|
|
|
Sections Exist in pjsip.conf
This patch modifies the current loading strategy of the pjsip configuration. If
duplicate sections (e.g. sections containing the same [id/type]) are defined in
[pjsip.conf], the loader will consider the configuration for the given type as
invalid when the duplicate section is encountered. The entire configuration
(including what was previously loaded) for the duplicate [id/type] sections
will be rejected and destroyed, an error message is logged and the load
processing for the given stops.
ASTERISK-24996
Reported By: Ashley Sanders
Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef
|
|
When problems occur regarding outbound registrations, it currently
is difficult to debug. Most off-nominal paths had warning messages,
but sometimes we want to know what's going on before hitting the
off-nominal path. This patch adds lots of debugging output that
should give a clearer picture of what is happening with regards
to outbound registrations.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: I577bde7860be0a6c872b5bcb4d5047340bf45d45
|
|
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
|
|
|
