Age | Commit message (Collapse) | Author |
|
This patch introduces another test in test_event.c that exercises most of the
subscription related ast_event API calls. I made some minor additions to the
existing event allocation test to increase API coverage by the test code.
Finally, I made a list in a comment of API calls not yet touched by the test
module as a to-do list for future test development.
During the development of this test code, I discovered a number of bugs in
the event API.
1) subscriptions to AST_EVENT_ALL were not handled appropriately in a couple
of different places. The API allows a subscription to all event types,
but with IE parameters, just as if it was a subscription to a specific
event type. However, the parameters were being ignored. This affected
ast_event_check_subscriber() and event distribution to subscribers.
2) Some of the logic in ast_event_check_subscriber() for checking subscriptions
against query parameters was wrong.
Review: https://reviewboard.asterisk.org/r/617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257544 | tilghman | 2010-04-15 16:23:24 -0500 (Thu, 15 Apr 2010) | 6 lines
Allow application options with arguments to contain parentheses, through a variety of escaping techniques.
Fixes SWP-1194 (ABE-2143).
Review: https://reviewboard.asterisk.org/r/604/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are two unit tests contained here.
1. "Invalid ACL" This attempts to read a bunch of badly formatted ACL entries
and add them to a host access rule. The goal of this test is to be sure that
all invalid entries are rejected as they should be.
2. "ACL" This sets up four ACLs. One is a permit all, one is a deny all, and
the other two have specific rules about which subnets are allowed and which
are not. Then a set of test addresses is used to determine whether we would
allow those addresses to access us when each ACL is applied. This test, by the
way, was what resulted in AST-2010-003's creation.
Review: https://reviewboard.asterisk.org/r/532
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
pointer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #16758)
Reported by: wdoekes
Patches:
20100316__issue16758.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/561/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reviewboard: https://reviewboard.asterisk.org/r/554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This resolves the last compile failure on bamboo.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
alteration.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(Copied from reviewboard)
Tests the following:
1. Basic allocation and setting of string fields.
2. Shrinking a string field and re-expanding it.
3. Growing the last allocation in a string field pool.
4. Setting a string to a large value such that a new string field pool must be
allocated.
In each part, we make sure that the string field is accurate (has the correct
value in it), make sure that the 2 bytes before the string field has the correct
capacity for the field, and for tests 2-4, we make sure that the string field is
where we expect it to be in memory.
Also tested:
5. Shrinking a string field and partially re-expanding it.
6. Setting strings in such a way as to create three separate string field pools
and then removing the middle pool.
There is a bug fix in the init function, which ensures the embedded_pool is set
to NULL which is important for stack allocated structures.
Review: https://reviewboard.asterisk.org/r/185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(issue #16900)
Reported by: bluecrow76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248533 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/517
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248225 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Current support for regex matching was previously only available on the group.
Also, error reporting for regex failures has been added. In addition to this
feature enhancement a unit test has been written to check the regular expression
logic to ensure the count operation is working as expected.
(closes issue #16642)
Reported by: kobaz
Patches:
groupmatch2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/516/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This test works by reading input from arrays to build a sample
dialplan. From there, patterns are attempted to be matched against
said dialplan, with the expected match given. We then search in our
example dialplan to see if we find a match and if what we find matches
what we expected it to match.
(closes issue #16809)
Reported by: lmadsen
Tested by: mmichelson
Review: https://reviewboard.asterisk.org/r/504/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A bug was discovered during the creation of the astobj2 unit test.
When OBJ_MULTIPLE | OBJ_UNLINK is used, the objects being returned
had a ref count issue. This patch resolves that.
Review: https://reviewboard.asterisk.org/r/496/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This module includes a single test so far that creates events using two
different methods and does some verification on the result to make sure
the correct data can be retrieved from the event that was created.
One bug was found in the event API while developing this test, which makes
me happy. :-)
Review: https://reviewboard.asterisk.org/r/495/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/491/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
functions are still broken.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
failures we need to address.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/474/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/470/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/471/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(related to issue #16560)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|