diff options
author | Shaun Ruffell <sruffell@digium.com> | 2012-03-21 16:34:06 +0000 |
---|---|---|
committer | Shaun Ruffell <sruffell@digium.com> | 2012-03-21 16:34:06 +0000 |
commit | a50fc3829ca7252b2a516e7149fd5a996d57ba06 (patch) | |
tree | 83421a55ab2ff999ff51c0fd8106254e3f7e3410 | |
parent | a574f5721284fb4d0c0686ff24fd2ae21321aa86 (diff) |
wct4xxp: __t4_frame_in and __t4_framer_out slowdowns.
This is a partial revert of r10234 "wct4xxp: __t4_framer_in and
__t4_framer_out speedups."
There were some platform + firmware version combinations that would fail to
properly configure the framer with the aforementioned speedups. The originally
reported sympton was that interrupts would fail to start and while
troubleshooting I also saw cases where one of the spans would stay in alarm
after starting. By adding in additional reads to the version register, the
overall process of writing / reading from the framer control registers is
slowed down which increases reliability.
This change does *not* affect the main path of TDM data which is DMAed
directly into buffers in host memory and are not read / written to / from
framer registers directly.
Reported-and-Tested-by: Vahan Yerkanian <vahan@arminco.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10559 a0bf4364-ded3-4de4-8d8a-66a801d63aff
-rw-r--r-- | drivers/dahdi/wct4xxp/base.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/dahdi/wct4xxp/base.c b/drivers/dahdi/wct4xxp/base.c index 27fbc6a..a1018c5 100644 --- a/drivers/dahdi/wct4xxp/base.c +++ b/drivers/dahdi/wct4xxp/base.c @@ -680,11 +680,12 @@ static unsigned int __t4_framer_in(const struct t4 *wc, int unit, val = ((unit & 0x3) << 8) | (addr & 0xff) | haddr; writel(val, wc_laddr); - /* readl(wc_version); */ + readl(wc_version); writel(val | WC_LFRMR_CS | WC_LREAD, wc_laddr); readl(wc_version); ret = readb(wc_ldata); writel(val, wc_laddr); + readl(wc_version); return ret; } @@ -710,11 +711,13 @@ static void __t4_framer_out(const struct t4 *wc, int unit, const u8 addr, val = ((unit & 0x3) << 8) | (addr & 0xff) | haddr; writel(val, wc_laddr); + readl(wc_version); writel(value, wc_ldata); readl(wc_version); writel(val | WC_LFRMR_CS | WC_LWRITE, wc_laddr); - /* readl(wc_version); */ + readl(wc_version); writel(val, wc_laddr); + readl(wc_version); } static void t4_framer_out(struct t4 *wc, int unit, |