wcte12xp: Remove GpakHpi.h file from drivers/dahdi/wcte12xp

This file is now in drivers/dahdi/voicebus folder.  This file should
have been removed when the Gpak API was moved out of the individual
board drivers.

Signed-off-by: Shaun Ruffell <sruffell@digium.com>

git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9559 a0bf4364-ded3-4de4-8d8a-66a801d63aff

1 files changed, 0 insertions, 79 deletions

diff --git a/drivers/dahdi/wcte12xp/GpakHpi.h b/drivers/dahdi/wcte12xp/GpakHpi.h
deleted file mode 100644
index c9b769b..0000000
--- a/drivers/dahdi/wcte12xp/GpakHpi.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 2001, Adaptive Digital Technologies, Inc.
- *
- * File Name: GpakHpi.h
- *
- * Description:
- *   This file contains common definitions related to the G.PAK interface
- *   between a host processor and a DSP processor via the Host Port Interface.
- *
- * Version: 1.0
- *
- * Revision History:
- *   10/17/01 - Initial release.
- *
- * This program has been released under the terms of the GPL version 2 by
- * permission of Adaptive Digital Technologies, Inc.
- *
- */
-
-/*
- * See http://www.asterisk.org for more information about
- * the Asterisk project. Please do not directly contact
- * any of the maintainers of this project for assistance;
- * the project provides a web site, mailing lists and IRC
- * channels for your use.
- *
- * This program is free software, distributed under the terms of
- * the GNU General Public License Version 2 as published by the
- * Free Software Foundation. See the LICENSE file included with
- * this program for more details.
- */
-
-#ifndef _GPAKHPI_H  /* prevent multiple inclusion */
-#define _GPAKHPI_H
-
-
-/* Definition of G.PAK Command/Reply message type codes. */
-#define MSG_NULL_REPLY 0            /* Null Reply (unsupported Command) */
-#define MSG_SYS_CONFIG_RQST 1       /* System Configuration Request */
-#define MSG_SYS_CONFIG_REPLY 2      /* System Configuration Reply */
-#define MSG_READ_SYS_PARMS 3        /* Read System Parameters */
-#define MSG_READ_SYS_PARMS_REPLY 4  /* Read System Parameters Reply */
-#define MSG_WRITE_SYS_PARMS 5       /* Write System Parameters */
-#define MSG_WRITE_SYS_PARMS_REPLY 6 /* Write System Parameters Reply */
-#define MSG_CONFIGURE_PORTS 7       /* Configure Serial Ports */
-#define MSG_CONFIG_PORTS_REPLY 8    /* Configure Serial Ports Reply */
-#define MSG_CONFIGURE_CHANNEL 9     /* Configure Channel */
-#define MSG_CONFIG_CHAN_REPLY 10    /* Configure Channel Reply */
-#define MSG_TEAR_DOWN_CHANNEL 11    /* Tear Down Channel */
-#define MSG_TEAR_DOWN_REPLY 12      /* Tear Down Channel Reply */
-#define MSG_CHAN_STATUS_RQST 13     /* Channel Status Request */
-#define MSG_CHAN_STATUS_REPLY 14    /* Channel Status Reply */
-
-#define MSG_TEST_MODE 17            /* Configure/Perform Test Mode */
-#define MSG_TEST_REPLY 18           /* Configure/Perform Test Mode Reply */
-
-#define MSG_ALG_CONTROL 27             /* algorithm control */
-#define MSG_ALG_CONTROL_REPLY 28       /* algorithm control reply */
-#define MSG_GET_TXCID_ADDRESS 29       /* get tx cid buffer start address */
-#define MSG_GET_TXCID_ADDRESS_REPLY 30 /* get tx cid buffer start addr reply */
-
-#define MSG_PING 35                    /* ping command */
-#define MSG_PING_REPLY 36              /* ping command reply */
-#define MSG_SERIAL_TXVAL 37            /* transmit serial fixed value */
-#define MSG_SERIAL_TXVAL_REPLY 38      /* transmit serial fixed value reply */
-#define MSG_TDM_LOOPBACK 39            /* tdm loopback control */
-#define MSG_TDM_LOOPBACK_REPLY 40      /* tdm loopback control reply */
-#define MSG_RESET_USAGE_STATS 41       /* reset cpu usage stats */
-#define MSG_RESET_USAGE_STATS_REPLY 42 /* reset cpu usage stats reply */
-
-#define MSG_RESET_FRAME_STATS 47       /* reset framing stats */
-#define MSG_RESET_FRAME_STATS_REPLY 48 /* reset framing stats reply */
-
-#define MSG_READ_DSP_MEMORY         49 /* read small section of DSP's memory */
-#define MSG_READ_DSP_MEMORY_REPLY   50 /* read memory reply */
-
-#define MSG_ACCESSGPIO				51
-#define MSG_ACCESSGPIO_REPLY		52
-#endif  /* prevent multiple inclusion */