1 files changed, 0 insertions, 297 deletions
diff --git a/drivers/dahdi/xpp/utils/xpp_fxloader b/drivers/dahdi/xpp/utils/xpp_fxloader
deleted file mode 100644
index 5a26560..0000000
--- a/drivers/dahdi/xpp/utils/xpp_fxloader
+++ /dev/null
@@ -1,297 +0,0 @@
-#!/bin/sh
-
-# xpp_fxloader: load Xorcom Astribank (XPP) firmware
-#
-# This script can be run manually or from hotplug/udev.
-#
-# Firmware files should be located in $FIRMWARE_DIR which defaults:
-# 	1. /usr/share/zaptel
-#	2. Can be overidden by setting $FIRMWARE_DIR in the environment
-#	3. Can be overidden by setting $FIRMWARE_DIR in /etc/default/zaptel
-#
-# Manual Run
-# ##########
-#
-#   path/to/xpp_fxloader load
-#
-# Make sure the firmware files are in $FIRMWARE_DIR
-#
-# UDEV Installation
-# #################
-#
-# Copy xpp.rules to /etc/udev/udev.d and xpp_fxloader to /etc/hotplug/usb/ .
-#
-# Hotplug Installation
-# ####################
-#
-# Copy this file and the file xpp_fxloader.usermap to /etc/hotplug/usb/ .
-#
-# 
-# Written by Tzafrir Cohen <tzafrir.cohen@xorcom.com>
-# Copyright (C) 2006, Xorcom
-#
-# All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# Make sure fxload is in the path:
-PATH="$PATH:/usr/local/sbin:/sbin:/usr/sbin"
-export PATH
-
-me=`basename $0`
-DEBIAN_DEFAULTS="/etc/default/zaptel"
-REDHAT_DEFAULTS="/etc/sysconfig/zaptel"
-
-status_fd=3
-
-if [ -r "$DEBIAN_DEFAULTS" -a -r "$REDHAT_DEFAULTS" ]; then
-	echo 1>&2 "$0: Both '$DEBIAN_DEFAULTS' and '$REDHAT_DEFAULTS' exist"
-	exit 1
-elif [ -r "$DEBIAN_DEFAULTS" ]; then
-	DEFAULTS="$DEBIAN_DEFAULTS"
-elif [ -r "$REDHAT_DEFAULTS" ]; then
-	DEFAULTS="$REDHAT_DEFAULTS"
-fi
-
-if [ -t 2 ]; then
-	LOGGER="logger -i -t '$me' -s"
-else
-	LOGGER="logger -i -t '$me'"
-fi
-
-USBFS_PREFIX=/proc/bus/usb
-DEVUSB_PREFIX=/dev/bus/usb
-USB_PREFIX=
-
-FIRMWARE_DIR="${FIRMWARE_DIR:-/usr/share/zaptel}"
-
-FIRM_FXS=$FIRMWARE_DIR/FPGA_FXS.hex
-
-FPGA_LOAD=${FPGA_LOAD:-/usr/sbin/fpga_load}
-USB_FW="${USB_FW:-USB_FW.hex}"
-
-if [ -r "$DEFAULTS" ]; then
-	. "$DEFAULTS"
-fi
-
-if [ "$USB_PREFIX" = '' ]; then
-	if [ -d "$DEVUSB_PREFIX" ]; then
-		USB_PREFIX=$DEVUSB_PREFIX
-	elif [ -r "$USBFS_PREFIX/devices" ]; then
-		USB_PREFIX=$USBFS_PREFIX
-	fi
-fi
-
-# With Kernels older that 2.6.10 it seems to be possible
-# to trigger a race condition by running fxload or fpga_load 
-# immediately after the detection of the device.
-KERNEL_HAS_USB_RACE=0
-case "`uname -r`" in 2.6.[89]*) KERNEL_HAS_USB_RACE=1;; esac
-sleep_if_race() {
-  if [ "$KERNEL_HAS_USB_RACE" = '1' ]; then
-    sleep 2
-  fi
-}
-
-find_dev() {
-  v_id=$1
-  p_id=$2
-  
-  lsusb | tr -d : | awk "/ ID $v_id$p_id/{printf \"$USB_PREFIX/%s/%s \",\$2,\$4}"
-}
-
-do_fxload() {
-  sleep_if_race
-  ( fxload -t fx2 $* 2>&1 1>/dev/null || exit 1 ) | $LOGGER
-}
-
-load_fw() {
-  v_id=$1
-  p_id=$2
-  fw=$3
-  
-  devices=`find_dev $v_id $p_id`
-  for dev in $devices
-  do
-    $LOGGER "USB Firmware $FIRMWARE_DIR/$fw into $dev"
-    do_fxload -D $dev -I $FIRMWARE_DIR/$fw || exit 1
-  done
-}
-
-load_fpga() {
-  v_id=$1
-  p_id=$2
-  fw=$3
-  
-  devices=`find_dev $v_id $p_id`
-  for dev in $devices
-  do
-	(
-	card_ver=`$FPGA_LOAD -g -D $dev | sed -n 's/^.*Release: *//'`
-
-	$LOGGER "FPGA Firmware into $dev"
-	sleep_if_race
-	(
-		$FPGA_LOAD -D "$dev" -I "$FIRMWARE_DIR/$fw" -i
-		echo $? >$status_fd
-	)>| $LOGGER
-	status=`cat <$status_fd`
-	if [ "$status" != 0 ]; then
-		echo "fpga_load failed with status $status" | $LOGGER
-		exit 77
-	fi
-	) &
-	sleep 0.4
-  done
-  wait
-}
-
-numdevs() {
-  v_ids="$1"
-  p_ids="$2"
-
-  for v in $v_ids
-  do
-    (
-      for p in $p_ids
-      do
-        find_dev $v $p
-      done
-    )
-  done | wc -w
-}
-
-wait_renumeration() {
-  num="$1"
-  v_ids="$2"
-  p_ids="$3"
-
-  while
-    n=`numdevs "$v_ids" "$p_ids"`
-    [ "$num" -gt "$n" ]
-  do
-    echo -n "."
-    sleep 1
-  done
-  echo "Got all $num devices"
-}
-
-reset_fpga() {
-  totaldevs=`numdevs e4e4 '11[3456][012]'`
-  devices=`find_dev e4e4 '11[3456][12]'`
-  echo "Reseting devices [$totaldevs devices]"
-  for dev in $devices
-  do
-	$LOGGER "Resetting FPGA Firmware on $dev"
-	sleep_if_race
-	$FPGA_LOAD -D "$dev" -r 2>&1 >/dev/null | $LOGGER
-	status=$PIPESTATUS
-	if [ "$status" != 0 ]; then
-		echo "fpga_load failed removing with status $status" | $LOGGER
-		exit 78
-	fi
-  done
-  if [ "$1" = 'wait' ]; then
-	  wait_renumeration $totaldevs e4e4 '11[3456]0'
-  fi
-}
-
-#########################
-##
-## Manual run
-##
-
-# to run manually, pass the parameter 'xppdetect'
-case "$1" in
-udev) 
-	# the following emulate hotplug's environment from udev's environment:
-	DEVICE="$DEVNAME"
-	PRODUCT="$2"
-	# skip on to the rest of the script. Don't exit.
-	;;
-reset-wait)
-	reset_fpga wait
-	;;
-reset)
-	reset_fpga
-	;;
-xppdetect|load|usb)
-	numdevs=`numdevs e4e4 '11[3456][01]'`
-	echo "--------- FIRMWARE LOADING: ($1) [$numdevs devices]"
-
-	load_fw e4e4 1130 $USB_FW
-	load_fw e4e4 1140 $USB_FW
-	load_fw e4e4 1150 $USB_FW
-	load_fw e4e4 1160 $USB_FW
-	wait_renumeration $numdevs e4e4 '11[3456]1'
-	if [ "$1" != 'usb' ]
-	then
-		load_fpga e4e4 1131 FPGA_FXS.hex
-		load_fpga e4e4 1141 FPGA_1141.hex
-		load_fpga e4e4 1151 FPGA_1151.hex
-		load_fpga e4e4 1161 FPGA_1161.hex
-		wait_renumeration $numdevs e4e4 '11[3456]2'
-	fi
-
-	sleep 3		# Let it stabilize
-	echo "--------- FIRMWARE IS LOADED"
-	exit 0
-	;;
-help)
-	echo "$0: Astribank firmware loading script."
-	echo "Usage: "
-	echo "$0 load  : manual firmware loading."
-	echo "$0 usb   : manual firmware loading: USB firmware only."
-	echo "$0 help  : this text."
-	echo ""
-	echo "('xppdetect' is an alias of 'load')"
-	exit 0
-	;;
-esac
-
-#########################
-##
-## Hotplug run
-##
-
-# allow disabling automatic hotplugging:
-if [ "$XPP_HOTPLUG_DISABLED" != '' ]; then
-	$LOGGER -p kern.info "Exiting... XPP_HOTPLUG_DISABLED"
-	exit 0
-fi
-
-if [ "$ACTION" = "add" ] && [ -w "$DEVICE" ]
-then
-	$LOGGER "Trying to find what to do for product $PRODUCT, device $DEVICE"
-	prod_id=`echo "$PRODUCT" | cut -d/ -f2`
-	case "$PRODUCT" in
-	e4e4/11[345]0/*)
-		FIRM_USB="$FIRMWARE_DIR/$USB_FW"
-		$LOGGER "Loading firmware '$FIRM_USB' into '$DEVICE'"
-		do_fxload -D "$DEVICE" -I "$FIRM_USB"
-		;;
-	e4e4/11[345]1/*)
-		if [ "$prod_id" = 1131 ]; then
-			FIRM_FPGA="$FIRMWARE_DIR/FPGA_FXS.hex"	# Legacy
-		else
-			FIRM_FPGA="$FIRMWARE_DIR/FPGA_$prod_id.hex"
-		fi
-		sleep_if_race
-		$FPGA_LOAD -D "$DEVICE" -I "$FIRM_FPGA" 2>&1 >/dev/null | $LOGGER
-		;;
-	esac	
-fi