Remove some leftovers.

git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@5039 a0bf4364-ded3-4de4-8d8a-66a801d63aff

2 files changed, 0 insertions, 1524 deletions

diff --git a/xpp/genzaptelconf b/xpp/genzaptelconf
deleted file mode 100755
index c74e573..0000000
--- a/xpp/genzaptelconf
+++ /dev/null
@@ -1,1198 +0,0 @@
-#! /bin/bash
-
-# genzaptelconf: generate as smartly as you can:
-#		/etc/dahdi/system.conf
-#		/etc/asterisk/zapata-channels.conf (to be #include-d into zapata.conf)
-#	update:
-#		With '-M' /etc/modules (list of modules to load)
-#
-# Copyright (C) 2005 by Xorcom <support@xorcom.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-#
-#
-# If you have any technical questions, contact 
-# Tzafrir Cohen <tzafrir.cohen@xorcom.com>
-#	
-
-# The script uses a number of bash-specific features
-# TODO: either ditch them or convert to perl
-# Don't override variables here. 
-# Override them in /etc/default/zaptel (debian) or /etc/sysconfig/zaptel 
-# (redhat/centos)
-
-# /etc/default/zaptel may override the following variables
-VERSION=0.5.10
-rcsid='$Id$'
-lc_country=us
-# set to: ls, ks or gs for (Loopstart, Kewlstart and GroundStart)
-#         on FXS channels (FXO signalling).
-fxs_default_start=ks
-base_exten=6000
-# If set: no context changes are made in zapata-channels.conf
-#context_manual=yes
-context_lines=from-pstn      # context into which PSTN calls go
-context_phones=from-internal # context for internal phones calls.
-# The two below apply to input and output ports of the Xorcom Astribank:
-context_input=astbank-input
-context_output=astbank-output # useless, but helps marking the channels :-)
-# TODO: what about PRI/BRI?
-# If set: no group changes are made in zapata-channels.conf
-#group_manual=yes
-group_phones=5 # group for phones
-group_lines=0  # group for lines
-# Set fxs_immediate to 'yes' to make all FXS lines answer immediately.
-fxs_immediate=no
-
-ZAPCONF_FILE=${ZAPCONF_FILE:-/etc/dahdi/system.conf}
-ZAPCONF_FILE_SYSTEM=$ZAPCONF_FILE
-ZAPATA_FILE=${ZAPATA_FILE:-/etc/asterisk/zapata-channels.conf}
-ZAPSCAN_FILE=${ZAPSCAN_FILE:-/etc/asterisk/zapscan.conf}
-ZAPTEL_BOOT_DEBIAN=${ZAPTEL_BOOT_DEBIAN:-/etc/default/zaptel}
-ZAPTEL_BOOT_FEDORA=${ZAPTEL_BOOT_FEDORA:-/etc/sysconfig/zaptel}
-MODLIST_FILE=/etc/modules
-MODLIST_FILE_FEDORA=/etc/sysconfig/zaptel
-exten_base_dir=/etc/asterisk/extensions-phones.d
-exten_defs_file=/etc/asterisk/extensions-defs.conf
-# perl utilities:
-xpp_sync=/usr/sbin/xpp_sync
-dahdi_registration=/usr/sbin/dahdi_registration
-# how long to wait for /dev/zap/ctl to appear? (seconds)
-DEVZAP_TIMEOUT=${DEVZAP_TIMEOUT:-20}
-DAHDI_CFG=${DAHDI_CFG:-/sbin/dahdi_cfg}
-# BRI/PRI spans will be in an additional per-span group whose number
-# is SPAN_GROUP_BASE + span-number
-SPAN_GROUP_BASE=10
-# set to "yes" to make BRI NT spans set overlapdial (handy for ISDN phones
-# and other devices).
-brint_overlap=no
-
-# a temporary directory to store whatever we need to remember.
-#
-# The main loop of genconf is run in a sub-process.
-tmp_dir=
-
-# A list of all modules:
-# - the list of modules which will be probed (in this order) if -d is used
-# - The module that will be deleted from /etc/modules , if -d -M is used
-ALL_MODULES="wct4xxp wcte12xp wcte11xp wct1xxp wanpipe tor2 torisa qozap vzaphfc zaphfc ztgsm wctdm24xxp wctdm opvxa1200 wcfxo pciradio wcusb xpp_usb"
-
-# The name of the variable in /etc/sysconfig/zaptel into which to set 
-# the list of detected modules.
-modules_var=MODULES
-# On SuSE with the rpm package:
-#modules_var=ZAPTEL_MODULES
-
-# What signalling to give to ZapBRI channels?
-# bri:       bri_net; bri_cpe           (Bristuffed Asterisk. No multi- support)
-# bri_ptmpi: bri_net_ptmp; bri_cpe_ptmp (Bristuffed Asterisk, multi- support)
-# pri:       pri_net; pri_cpe           (Recent Asterisk. Experimental)
-#ZAPBRI_SIGNALLING=bri
-ZAPBRI_SIGNALLING=bri_ptmp
-#ZAPBRI_SIGNALLING=pri
-zapconf_def_termtype=te
-
-# A command to stop / start asterisk. Must support parameters "start"
-# and "stop" . This is the executable:
-ZAPCONF_ASTERISK_SCRIPT=/etc/init.d/asterisk
-#
-# Should you need to pass extra arguments:
-ZAPCONF_ASTERISK_CMD=$ZAPCONF_ASTERISK_SCRIPT
-
-# read default configuration from /etc/default/zaptel
-if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi
-if [ -r $ZAPTEL_BOOT_FEDORA ]; then . $ZAPTEL_BOOT_FEDORA; fi
-
-if [ ! -x "$DAHDI_CFG" ]; then
-	# Work around a bug in the rpm package: dahdi_cfg should be in 
-	# /sbin as it may be required for starting a network interface
-	if [ -x /usr/sbin/dahdi_cfg ]; then
-		DAHDI_CFG=/usr/sbin/dahdi_cfg
-	else
-		echo >&2 "dahdi_cfg is not on found, do you have dahdi properly installed?"
-		exit_cleanup 1
-	fi
-fi
-
-XPP_SYNC=auto # sync mode. can be set to '0' or '1' or HOST explicitly.
-
-# it is safe to use -c twice: the last one will be used.
-dahdi_cfg_cmd="$DAHDI_CFG -c $ZAPCONF_FILE"
-
-# work around a bug (that was already fixed) in the installer:
-if [ "$lc_country" = '' ]; then lc_country=us; fi
-
-force_stop_ast=no
-do_detect=no
-do_unload=no
-do_module_list=no
-verbose=no
-do_restart=yes
-fxsdisable=no
-do_gen_zapscan=no
-
-span_te_timing_counter=1
-
-case "$ZAPBRI_SIGNALLING" in
-bri)      ZAPBRI_NET=bri_net;      ZAPBRI_CPE=bri_cpe ;;
-pri)      ZAPBRI_NET=pri_net;      ZAPBRI_CPE=pri_cpe ;;
-bri_ptmp) ZAPBRI_NET=bri_net_ptmp; ZAPBRI_CPE=bri_cpe_ptmp ;;
-*) 
-	die "Incorrect value for ZAPBRI_SIGNALLING ($ZAPBRI_SIGNALLING). Abortring"
-	;;
-esac
-
-die() {
-	echo "$@" >&2
-	exit_cleanup 1
-}
-
-say() {
-	if [ "$verbose" = no ]; then
-		return
-	fi
-	echo "$@"   >&2
-}
-
-# exit (exit value is the optional $1), and clean up after us
-exit_cleanup() {
-	if [ -d "$tmp_dir" ]; then
-		# don't fail but don't hide error if directory is not
-		# empty
-		rmdir "$tmp_dir" || : 
-	fi
-	exit $1
-}
-
-# Wait for udev to generate /dev/zap/ctl, if needed:
-wait_for_zapctl() {
-	# if device file already exists, or if dahdi has failed to load: 
-	# no point waiting.
-	if [ -c /dev/zap/ctl ] || ! grep -q dahdi /proc/modules ; then
-	  return
-	fi
-	say "Waiting for /dev/zap/ctl to be generated"
-	devzap_found=0
-	for i in `seq $DEVZAP_TIMEOUT`; do
-		sleep 1
-		if [ -c /dev/zap/ctl ]; then
-		  devzap_found=1
-			break
-		fi
-	done
-	if [ "$devzap_found" != 1 ]; then
-		say "Still no /dev/zap/ctl after $devzap_timeout seconds."
-		echo >&2 "No /dev/zap/ctl: cannot run dahdi_cfg. Aborting."
-	fi
-}
-
-run_dahdi_cfg() {
-	# Run dahdi_cfg itself
-	if [ "$verbose" = no ]; then
-		$dahdi_cfg_cmd "$@"
-	else
-		say "Reconfiguring identified channels"
-		$dahdi_cfg_cmd -vv "$@"
-	fi
-}
-
-update_module_list_debian() {
-	say "Updating Debian modules list $MODLIST_FILE."
-	del_args=`for i in $ALL_MODULES ztdummy
-	do
-		echo "$i" | sed s:.\*:-e\ '/^&/d':
-	done`
-	add_args=`for i in $*
-	do
-		echo "$i" | sed s:.\*:-e\ '\$a&':
-	done`
-	
-	sed -i.bak $del_args "$MODLIST_FILE"
-	for i in $*
-	do
-		echo "$i"
-	done >> "$MODLIST_FILE"
-}
-
-update_module_list_fedora() {
-	say "Updating modules list in dahdi init config $MODLIST_FILE_FEDORA."
-	sed -i.bak -e "/^$modules_var=/d" "$MODLIST_FILE_FEDORA"
-	echo "$modules_var=\"$*\"" >> "$MODLIST_FILE_FEDORA"
-}
-
-update_module_list() {
-  if   [ -f "$MODLIST_FILE" ]; then
-		update_module_list_debian "$@"
-	elif [ -f "$MODLIST_FILE_FEDORA" ]; then
-		update_module_list_fedora "$@"
-	else
-	  die "Can't find a modules list to update. Tried: $MODLIST_FILE, $MODLIST_FILE_FEDORA. Aborting"
-	fi
-}
-
-
-
-zap_reg_xpp() {
-	if [ ! -d /proc/xpp ]; then return; fi
-
-	# Get a list of connected Astribank devices, sorted by the name of
-	# the USB connector. That order is rather arbitrary, but will not
-	# change without changes to the cabling.
-	xbusses=`sed -e '/STATUS=connected/!d' -e 's/ *STATUS=.*//' -e 's/ *CONNECTOR=//' /proc/xpp/xbuses | sort -t: -k 2 | cut -d: -f1`
-	say "Dahdi registration order:"
-	say "$xbusses"
-
-	# get a list of XPDs that were not yet registered as dahdi spans.
-	# this will be the case if you set the parameter zap_autoreg=0 to
-	# the module xpp
-	# Append /dev/null to provide a valid file name in case of an empty pattern.
-	xbusses_pattern=`echo $xbusses| sed -e 's|XBUS-[0-9]*|/proc/xpp/&/XPD-*/dahdi_registration|g'`' /dev/null'
-	xpds_to_register=`grep -l 0 $xbusses_pattern`
-	for file in $xpds_to_register; do
-		echo 1 >$file
-	done
-}
-
-# Initialize the Xorcom Astribank (xpp/)
-xpp_startup() {
-	# do nothing if the module xpp was not loaded, or if no 
-	# Astribanks connected:
-	if [ ! -d /proc/xpp ]; then return 0; fi
-	if ! grep -q 'STATUS=connected' /proc/xpp/xbuses; then return 0; fi
-
-	echo "Waiting for Astribank devices to initialize:"
-	cat /proc/xpp/XBUS-[0-9]*/waitfor_xpds 2>/dev/null || true
-	
-	# overriding locales for the above two, as perl can be noisy
-	# when locales are missing.
-	# No register all the devices if they didn't auto-register:
-	LC_ALL=C $dahdi_registration on
-
-	# this one could actually be run after dahdi_cfg:
-	LC_ALL=C $xpp_sync "$XPP_SYNC"
-}
-
-
-
-usage() {
-	program=`basename $0`
-
-	echo >&2 "$program: generate dahdi system.conf and zapata.conf"
-	echo >&2 "(version $VERSION, $rcsid)"
-	echo >&2 "usage:"
-	echo >&2 " $program [-sRdv] [-m k|l|g] [-c <country_code>] [-e <base_exten>] [-F]"
-	echo >&2 " $program [-sRdv] -l"
-	echo >&2 " $program -su"
-	echo >&2 " $program -h (this screen)"
-	echo >&2 ""
-	echo >&2 "Options:"
-	echo >&2 "  -c CODE: set the country code (default: $lc_country)"
-	echo >&2 "  -e NUM: set the base extension number (default: $base_exten)"
-	echo >&2 "  -F: Don't print FXSs in zapata.conf"
-	echo >&2 "  -l: output a list of detected channels instead of dahdi system.conf"
-	echo >&2 "  -d: Perform hardware detection"
-	echo >&2 "  -u: Unload dahdi modules (will not restart Asterisk)."
-	echo >&2 "  -v: verbose"
-	echo >&2 "  -s: Stop Asterisk before running, and start it at the end."
-	echo >&2 "  -R: Don't restart asterisk in the end."
-	echo >&2 "  -z: also generate zapscan.conf for the asterisk GUI."
-}
-
-# print /etc/asterisk/zapscan.conf for the Asterisk-GUI
-# $1: port type. Currently only fxs/fxo . Note that this is the type, and
-#                not the signalling (which would be the fxo fir an fxs port.
-# $2: port number. Probably a range of ports is also allowed.
-print_zapscan_port () {
-	if [ "$do_gen_zapscan" != 'yes' ]; then return 0; fi
-
-	echo "
-[$2]
-port=$1
-"	>>$zapscan_file
-}
-
-# $1: channel number
-print_pattern() {
-	local astbank_type=''
-	local reset_values=""
-	OPTIND=1
-	while getopts 'a:' arg
-	do
-		case "$arg" in
-			a) case "$OPTARG" in input|output) astbank_type=$OPTARG;;esac ;;
-		esac
-	done
-	shift $(( $OPTIND-1 ))
-
-
-	local chan=$1
-	local sig=$2 #fxs/fxo
-	local mode=$3
-	local method
-	
-	if [ "$sig" = 'fxs' ]; then
-		# Coutries in which we need to use busydetect:
-		# United Arab Emirats, Israel, Slovenia
-		case "$lc_country" in
-		ae|il|si) 
-			method=ls
-			;;
-		*)
-			method=ks
-			;;
-		esac
-	else
-		method="$fxs_default_start"
-	fi
-	case "$sig" in
-	fxs) sig_name=FXO;;
-	fxo) sig_name=FXS;;
-	esac
-	case "$mode" in
-	list)
-		echo $chan $sig_name $astbank_type;;
-	files)
-		# sadly, both input ports and output ports go into the same span as 
-		# the FXS ports. Thus we need to separate between them. See also 
-		# the zapata.conf section:
-		
-		echo ";;; line=\"$line\""                      >> $zapata_file
-		
-		if [ "$astbank_type" != '' ]; 
-			then echo "# astbanktype: $astbank_type" >>$dahdi_file; 
-		fi
-		echo "${sig}$method=$chan" >>$dahdi_file
-		# zap2amp will rewrite those from dahdi system.conf and hints there
-		if [ "$fxsdisable" = 'yes' ] && [ "$sig" = 'fxo' ]; then return; fi
-			
-		echo "signalling=${sig}_$method" >>$zapata_file
-		if [ "$sig" = 'fxo' ]
-		then
-			# to preconfigure channel 1's extension to 550, set
-			# chan_1_exten=550
-			# in, e.g, /etc/default/zaptel
-		  var_name=`echo chan_${chan}_exten`
-			cfg_exten=`echo ${!var_name} | tr -d -c 0-9`
-		  var_name=`echo chan_${chan}_vmbox`
-			cfg_vmbox=`echo ${!var_name} | tr -d -c 0-9`
-		  var_name=`echo chan_${chan}_cntxt`
-			cfg_cntxt=`echo ${!var_name} | tr -d -c 0-9`
-			
-			if [ "$cfg_exten" = '' ]
-			then # No extension number set for this channel
-				exten=$(($chan+$base_exten))
-			else # use the pre-configured extension number
-				exten=$cfg_exten
-			fi
-			# is there any real need to set 'mailbox=' ?
-			if [ "x$cfg_vmbox" = x ]
-			then # No extension number set for this channel
-				vmbox=$exten
-			else # use the pre-configured extension number
-				vmbox=$cfg_vmbox
-			fi
-			echo "callerid=\"Channel $chan\" <$exten>"     >> $zapata_file
-			reset_values="$reset_values callerid"
-			echo "mailbox=$exten"                          >> $zapata_file
-			reset_values="$reset_values mailbox"
-			if [ "$group_manual" != "yes" ]
-			then 
-				echo "group=$group_phones"                   >> $zapata_file
-				reset_values="$reset_values group"
-			fi
-			if [ "$context_manual" != "yes" ]
-			then
-				if [ "$astbank_type" != '' ];
-				then 
-					context_var_name=context_$astbank_type
-					echo context=${!context_var_name}          >> $zapata_file
-				else
-					echo "context=$context_phones"             >> $zapata_file
-				fi
-				reset_values="$reset_values context"
-			fi
-		else # this is an FXO (trunk/phone: FXO signalling)
-		  # we have may have set it. So reset it:
-			echo "callerid=asreceived"                     >> $zapata_file
-			if [ "$group_manual" != "yes" ]
-			then 
-				echo "group=$group_lines"                    >> $zapata_file
-			fi
-			if [ "$context_manual" != "yes" ]
-			then 
-				echo "context=$context_lines"                >> $zapata_file
-				reset_values="$reset_values context"
-			fi
-			if [ "$lc_country" = 'uk' ]
-			then
-			  echo "cidsignalling=v23"                     >> $zapata_file
-			  case $line in 
-			  *WCFXO*) echo "cidstart=history"             >> $zapata_file;;
-			  *)       echo "cidstart=polarity"            >> $zapata_file;;
-			  esac
-				reset_values="$reset_values cidsignalling cidstart"
-			fi
-			case "$line" in
-			*XPP_FXO*) 
-				if [ "$xpp_fxo_rxgain" != '' ]; then
-					echo "rxgain=$xpp_fxo_rxgain"             >> $zapata_file
-					reset_values="$reset_values rxgain"
-				fi
-				;;
-			esac
-			# if kewlstart is not used, busydetect has to be employed:
-			if [ "$method" = 'ls' ]
-			then
-			  echo 'busydetect=yes'                     >> $zapata_file
-				reset_values="$reset_values busydetect"
-			fi
-		fi
-
-		if [ "$astbank_type" = 'input' ] || \
-			( [ "$fxs_immediate" = 'yes' ] && [ "$sig" = "fxo" ] )
-		then 
-		  echo 'immediate=yes'                      >> $zapata_file
-			reset_values="$reset_values immediate"
-		fi
-		echo "channel => $chan"                          >> $zapata_file
-		reset_zapata_entry $zapata_file $reset_values
-		echo ""                                          >> $zapata_file
-
-		print_zapscan_port "$sig" "$chan"
-		;;
-	esac
-	
-}
-
-# the number of channels from /proc/dahdi
-# must always print a number as its output.
-count_proc_zap_lines() {
-	# if dahdi is not loaded there are 0 channels:
-	if [ ! -d /proc/dahdi ]; then echo '0'; return; fi
-	
-	(
-		for file in `echo /proc/dahdi/* |grep -v '\*'`
-		do sed -e 1,2d $file # remove the two header lines
-		done
-	) | wc -l # the total number of lines
-}
-
-load_modules() {
-	say "Test Loading modules:"
-	for i in $ALL_MODULES
-	do
-		lines_before=`count_proc_zap_lines`
-		args="${i}_args"
-		eval "args=\$$args"
-		# a module is worth listing if it:
-		# a. loaded successfully, and
-		# b. added channels lines under /proc/dahdi/*
-		if /sbin/modprobe $i $args 2> /dev/null 
-		then
-		  check=0
-		  case "$i" in
-			xpp_usb) check=`grep 'STATUS=connected' 2>/dev/null /proc/xpp/xbuses | wc -l` ;;
-			*) if [ $lines_before -lt `count_proc_zap_lines` ]; then check=1; fi ;;
-			esac
-			if [ "$check" != 0 ]
-			then
-			  probed_modules="$probed_modules $i"
-			  say "	ok	$i	$args"
-		  else
-			  say "	- 	$i	$args"
-				rmmod $i
-		  fi
-		else
-			say "	- 	$i	$args"
-		fi
-	done
-}
-
-# recursively unload a module and its dependencies, if possible.
-# where's modprobe -r when you need it?
-# inputs: module to unload.
-# returns: the result from 
-unload_module() {
-	module="$1"
-	line=`lsmod 2>/dev/null | grep "^$1 "`
-	if [ "$line" = '' ]; then return; fi # module was not loaded
-
-	set -- $line
-	# $1: the original module, $2: size, $3: refcount, $4: deps list
-	mods=`echo $4 | tr , ' '`
-	# xpp_usb keeps the xpds below busy, and hence must be removed
-	# before them:
-	case "$module" in xpd_*) mods="xpp_usb $mods";; esac
-	for mod in $mods; do
-		# run in a subshell, so it won't step over our vars:
-		(unload_module $mod) 
-		# TODO: the following is probably the error handling we want:
-		# if [ $? != 0 ]; then return 1; fi
-	done
-	rmmod $module
-}
-
-unload_modules() {
-	say "Unloading dahdi modules:"
-	unload_module dahdi
-	say ''
-}
-
-# sleep a while until the xpp modules fully register
-wait_for_xpp() {
-	if [ -d /proc/xpp ]
-	then
-		# wait for the XPDs to register:
-		# TODO: improve error reporting and produce a messagee here
-		cat /proc/xpp/XBUS-*/waitfor_xpds 2>/dev/null >/dev/null  || true
-	fi
-}
-
-detect() {
-	unload_modules
-	temporary_zapconf save
-	load_modules
-	temporary_zapconf restore
-	modlist="$probed_modules"
-	modlist="$(echo $modlist)"		# clean spaces
-	if [ "$do_module_list" = yes ]
-	then
-		update_module_list "$modlist"
-	fi
-	if echo $modlist | grep -q xpp_usb; then wait_for_xpp; fi
-}
-
-# The module configuration generated by dahdi includes a totally useless 
-# automatic run of dahdi_cfg after modules loading. As a workaround for that, 
-# we provide an empty dahdi system.conf temporarily.
-# 
-# At hardware detection time we shouldn't really touch dahdi system.conf . So we 
-# must keep a copy of it somewhere.
-#
-# I use ZAPCONF_FILE_SYSTEM rather than ZAPCONF_FILE, as the bogus modprobe 
-# entries will not be initiated by us.
-#
-# ZAPCONF_FILE_TMP is a "global", as it needs to be preserved between the
-# call to 'save' and to 'restore'
-ZAPCONF_FILE_TMP=
-temporary_zapconf() {
-  case "$1" in
-	save)
-	  say "Temporarily moving dahdi system.conf aside to work around broken modprobe.conf"
-		ZAPCONF_FILE_TMP=`mktemp /tmp/genzaptelconf-dahdi-system.conf-XXXXXX` || die "Error creating temporary dahdi system.conf"
-		if [ -f $ZAPCONF_FILE_SYSTEM ];  then
-			cp -a $ZAPCONF_FILE_SYSTEM $ZAPCONF_FILE_TMP
-		fi
-		echo -n >$ZAPCONF_FILE_SYSTEM
-		;;
-	restore)
-		# restore original dahdi system.conf:
-		if [ "$ZAPCONF_FILE_TMP" = '' ]; then return; fi
-		mv $ZAPCONF_FILE_TMP $ZAPCONF_FILE_SYSTEM
-		ZAPCONF_FILE_TMP=''
-		;;
-	esac
-}
-
-# run after the channel's entry. Used to reset all the values 
-reset_zapata_entry() {
-	conf_file="$1"; shift
-	
-	for arg in "$@"; do
-		case "$arg" in
-		busydetect)      echo "$arg=no"      >>$conf_file;;
-		context)         echo "$arg=default" >>$conf_file;;
-		immediate)       echo "$arg=no"      >>$conf_file;;
-		overlapdial)     echo "$arg=no"      >>$conf_file;;
-		rxgain)          echo "$arg=0"       >>$conf_file;;
-		txgain)          echo "$arg=0"       >>$conf_file;;
-		*)               echo "$arg="        >>$conf_file;;
-		esac
-	done
-}
-
-
-# we need to preserve the permissions of existing configurations files.
-# However we also don't want to be left with incomplete configurations in 
-# case we are stopped in the middle. Thus we create a temporary file and
-# mv it to the original file only when done.
-#
-# This function gives the temporary file the permissions of the original,
-# or some sane defaults.
-#
-# The temporary file is generated here, and ths its name is passed through
-# a variable whose name is passed as a parameter (new_var).
-#
-# $1: orig_cfg_file
-# $2: new_var
-gen_tmp_conf() {
-	orig_cfg_file=$1
-	new_var=$2
-
-	# assign to new_var by reference:
-	eval $new_var=`mktemp /tmp/genzaptelconf-conf-XXXXXX` \
-		|| die "Unable to create temporary config file for $orig_cfg_file"
-	if [ -r "$orig_cfg_file" ]; then
-		chown --reference="$orig_cfg_file" ${!new_var} 2>/dev/null
-		chmod --reference="$orig_cfg_file" ${!new_var} 2>/dev/null  
-	else
-		chmod 644 ${!new_var}
-	fi
-}
-
-# Extract information from one digital channel (one line in a /proc/dahdi 
-# file). Information is saved to $tmp_dir/span_foo variables.
-# FIXME: detection should move to when we know the number of channels
-# and hence can tell between an E1 and a T1.
-detect_digital_channel() {
-	line="$1"
-	chan_num="$2"
-	span_num="$3"
-
-	# PRI/BRI channel
-	# Rather than identifying cards by the header line, we identify 
-	# them by the channel names. This is shorter. 
-	# This also allows us to count the channel numbers and check if 
-	# we have a E1 span, a T1 span or a BRI span.
-
-	# span_lastd is always the one before last 
-	# channel. span_bchan is the last:
-	echo $chan_num      >$tmp_dir/span_end
-
-	if [ "`cat $tmp_dir/span_begin`" != "-1" ]
-	then
-		return #we already configured this span.
-	fi
-
-	# Now we need to give initial configuration to the span
-	echo $chan_num      >$tmp_dir/span_begin
-	echo $span_num      >$tmp_dir/span_num
-
-	case "$line" in
-	*ZTHFC*/* | *ztqoz*/* | *XPP_BRI_*/*)
-		# BRI channel
-		echo 'ccs'          >$tmp_dir/span_framing
-		echo 'euroisdn'     >$tmp_dir/span_switchtype
-		if [ "`cat $tmp_dir/span_termtype`" = 'nt' 2>/dev/null ]
-		then
-			echo $ZAPBRI_NET >$tmp_dir/span_signalling 
-		else
-			echo $ZAPBRI_CPE >$tmp_dir/span_signalling
-		fi
-		;;
-	*ztgsm*/*)
-		# Junghanns's GSM cards. 
-		echo 'ccs'          >$tmp_dir/span_framing
-		#Does this mean anything?
-		echo 'gsm'          >$tmp_dir/span_signalling
-		;;
-	*TE[24]/* | *WCT1/* | *Tor2/* | *TorISA/* | *WP[TE]1/* | \
-		*R[124]T1/* | *XPP_[TEJ]1_*)
-		# FIXME: handle cwain around here.  
-		# name: *cwain[12]/* . Always E1.
-
-		# PRI span (E1/T1)
-		echo 'esf'       >$tmp_dir/span_framing
-		echo 'b8zs'      >$tmp_dir/span_coding
-		echo 'national'  >$tmp_dir/span_switchtype
-		if [ "`cat $tmp_dir/span_termtype`" = 'nt' 2>/dev/null ]
-		then
-			echo pri_net >$tmp_dir/span_signalling 
-		else
-			echo pri_cpe >$tmp_dir/span_signalling
-		fi
-		# an example of country-specific setup. This is probably not accurate
-		# Contributions are welcome
-		case "$lc_country" in 
-		nl)
-			# (Just an example for per-country info)
-			echo 'ccs'       >$tmp_dir/span_framing
-			echo 'ami'       >$tmp_dir/span_coding
-			#echo 'crc4'      >$tmp_dir/span_yellow
-			#echo 'euroisdn'  >$tmp_dir/span_switchtype
-			#echo 'pri_cpe'   >$tmp_dir/span_signalling
-			;;
-		il|de|au)
-			echo 'ccs'       >$tmp_dir/span_framing
-			echo 'hdb3'      >$tmp_dir/span_coding
-			echo 'crc4'      >$tmp_dir/span_yellow
-			echo 'euroisdn'  >$tmp_dir/span_switchtype
-			;;
-		cl)
-			echo 'ccs'       >$tmp_dir/span_framing
-			echo 'hdb3'      >$tmp_dir/span_coding
-			#echo 'crc4'      >$tmp_dir/span_yellow
-			echo 'national'  >$tmp_dir/span_switchtype
-			;;
-		esac
-	;;
-	esac
-}
-
-# read information from the $tmp_dir/span_foo files and generate 
-# configuration for the span and its channels.
-write_digital_config() {
-	# if the current file we checked was not of a digital span, we have
-	# nothing to do:
-	if [ "`cat $tmp_dir/span_begin`" = -1 ]; then return; fi
-
-	# read files to variables:
-	for suffix in num begin end timing lbo framing \
-		coding switchtype signalling yellow termtype
-	do
-		eval span_$suffix=`cat $tmp_dir/span_$suffix 2>/dev/null`
-	done
-
-	# exactly the same logic is used in asterisk's chan_zap.c.
-	# also not that $(( )) is bash-specific
-	case "$((1+ $span_end - $span_begin))" in
-	2|3|24) #ztgsm, BRI or T1
-		dchan=$span_end
-		bchans="$span_begin-$(($span_end-1))"
-		;;
-	31) #E1
-		dchan="$(($span_begin+15))"
-		bchans="$span_begin-$(($span_begin+14)),$(($span_begin+16))-$span_end"
-		if [ "$span_framing" = 'esf' ]; then
-			# don't leave an E1 span with defective defaults:
-			span_framing=ccs
-			span_coding=hdb3
-			span_switchtype=euroisdn
-			span_yellow=crc4
-		fi
-		;;
-	esac
-	if [ "$span_yellow" != '' ]; then span_yellow=",$span_yellow"; fi
-	# Let's assume that a TE span should get the clock from the remote unit,
-	# and NT spans should provide timing. Just as a sane default.
-	# If we have several TE spans, the first will have priority 1, 
-	# second: 2, etc.
-	case "$span_signalling" in *_cpe*)
-		span_timing=$span_te_timing_counter
-		span_te_timing_counter=$(($span_te_timing_counter + 1))
-		;;
-	esac
-	case "$mode" in
-	files)
-		echo span=$span_num,$span_timing,$span_lbo,$span_framing,$span_coding$span_yellow >> $dahdi_file
-		# leave a comment in dahdi system.conf that allows to tell if
-		# this span is TE or NT:
-		if [ "$span_termtype" != '' ]
-		then echo "# termtype: $span_termtype" >>$dahdi_file
-		fi
-
-		echo bchan=$bchans >>$dahdi_file
-		echo dchan=$dchan  >>$dahdi_file
-		if [ "$fxsdisable" = 'yes' ] && [ "$span_termtype" = 'nt' ]; then return; fi
-		# You should not send content to zapata.conf below this line
-		
-		span_group=$(($SPAN_GROUP_BASE + $span_num))
-		
-		if [ "$span_termtype" != '' ]
-		then
-			# an ISDN card's span that we know if it is in NT mode or TE mode.
-			# NT is the same as FXS for us and TE is the same as FXO
-			if [ "$span_termtype" = 'nt' ]
-			then
-				echo "callerid=\"Channels $span_begin - $span_end\" <$span_begin>" >> $zapata_file
-				reset_values="$reset_values callerid"
-				#echo "mailbox=$exten"
-				if [ "$brint_overlap" = 'yes' ]
-				then
-					echo "overlapdial=yes"         >> $zapata_file
-					reset_values="$reset_values overlapdial"
-				fi
-				if [ "$group_manual" != "yes" ]
-				then 
-					echo "group=$group_phones,$span_group"     >> $zapata_file
-					reset_values="$reset_values group"
-				fi
-				if [ "$context_manual" != "yes" ]
-				then 
-					echo "context=$context_phones" >> $zapata_file
-				fi
-			else 
-				#echo "mailbox="
-				if [ "$group_manual" != "yes" ]
-				then 
-					echo "group=$group_lines,$span_group"      >> $zapata_file
-					reset_values="$reset_values group"
-				fi
-				if [ "$context_manual" != "yes" ]
-				then 
-					echo "context=$context_lines"  >> $zapata_file
-					reset_values="$reset_values context"
-				fi
-			fi
-		fi
-		echo "switchtype = $span_switchtype" >> $zapata_file
-		echo "signalling = $span_signalling" >> $zapata_file
-		echo "channel => $bchans"            >> $zapata_file
-		reset_zapata_entry $zapata_file $reset_values
-		reset_values=
-		;;
-	list)
-		echo "### BRI/PRI: $span_termtype" 
-		echo "$bchans Data"
-		echo "$dchan Control"
-		#echo BRI/PRI: chans: $bchans, control: $dchan
-		;;
-	esac
-}
-
-# This is where the actual detection configuration detection work happens.
-genconf() {
-	local mode=$1
-	local reset_values=""
-
-# 	spanlist=`echo /proc/dahdi/* |  grep -v '\*'`
-# 	spanlist=$(for i in `for i in  /proc/dahdi/*; do if [ -f $i ]; then echo $i |  cut -f 4 -d / ; fi; done | sort -n`; do echo -n "/proc/dahdi/$i "; done)
-# 	spanlist=(cd /proc/dahdi; ls | sort -n | sed 's|^|/proc/dahdi/|')
-	spanlist=`ls /proc/dahdi/ 2>/dev/null | sort -n | sed 's|^|/proc/dahdi/|'`
-
-	#if [ "$spanlist" == "" ]; then
-	#	die "No zapata interfaces in /proc/dahdi"
-	#fi
-
-
-	case "$mode" in 
-	files)
-		if [ "$do_gen_zapscan" = 'yes' ]; then
-			gen_tmp_conf "$ZAPSCAN_FILE" zapscan_file
-			cat <<EOF >$zapscan_file
-; zapscan.conf: information about detected dahdi channels
-; (currently: analog only)
-;
-; Automatically generated by $0 -- Please do not edit.
-
-EOF
-		fi
-		gen_tmp_conf "$ZAPTEL_FILE" dahdi_file
-		gen_tmp_conf "$ZAPATA_FILE" zapata_file
-		cat <<EOF >$dahdi_file
-# Autogenerated by $0 -- do not hand edit
-# Dahdi Configuration File
-#
-# This file is parsed by the Dahdi Configurator, dahdi_cfg
-#
-
-# It must be in the module loading order
-
-EOF
-		cat <<EOF >$zapata_file
-; Autogenerated by $0 -- do not hand edit
-; Dahdi Channels Configurations (zapata.conf)
-;
-; This is not intended to be a complete zapata.conf. Rather, it is intended 
-; to be #include-d by /etc/zapata.conf that will include the global settings
-;
-EOF
-		;;
-	esac
-
-	# For each line in the spanlist: see if it represents a channel.
-	# if it does, test that the channel is usable.
-	# we do that by configuring it (using dahdi_cfg with a 1-line config file)
-	# and then trying to read 1 byte from the device file.
-	#
-	# The '<(command)' syntax creates a temporary file whose content is is the
-	# output of 'command'.
-	#
-	# Another problem with such an approach is how to include an existing 
-	# configuration file. For instance: how to include some default settings.
-	#
-	# Maybe an 'include' directive should be added to dahdi system.conf ?
-	#cat $spanlist | 
-	for procfile in $spanlist
-	do
-		span_num=`basename $procfile`
-		# the first line is the title line. It states the model name
-		# the second line is empty
-		title=`head -n 1 $procfile`
-		# stuff that needs to be remembered accross lines (for PRI/BRI support)
-		case "$mode" in
-		list) echo "### $title";;
-		files)
-			echo ""         >>$dahdi_file
-			echo "# $title" >>$dahdi_file
-			echo ""         >>$zapata_file
-			echo "; $title" >>$zapata_file
-			;;
-		esac
-		echo '-1'  >$tmp_dir/span_begin
-		echo '-1'  >$tmp_dir/span_end
-		echo '0'   >$tmp_dir/span_timing
-		echo '0'   >$tmp_dir/span_lbo
-		echo ''    >$tmp_dir/span_framing
-		echo 'ami' >$tmp_dir/span_coding
-		echo ''    >$tmp_dir/span_switchtype
-		echo ''    >$tmp_dir/span_signalling
-		if [ "$zapconf_def_termtype" != '' ]
-		then
-			echo "$zapconf_def_termtype"    >$tmp_dir/span_termtype
-		fi
-
-		# Check if ZapBRI cards are in TE or NT mode
-		if   echo $title | egrep -q '((quad|octo)BRI PCI ISDN Card.* \[NT\]\ |octoBRI \[NT\] |HFC-S PCI A ISDN.* \[NT\] |Xorcom .* (BRI|T1|E1)_NT)'
-		then
-			echo 'nt' >$tmp_dir/span_termtype
-		elif echo $title | egrep -q '((quad|octo)BRI PCI ISDN Card.* \[TE\]\ |octoBRI \[TE\] |HFC-S PCI A ISDN.* \[TE\] |Xorcom .* (BRI|T1|E1)_TE)'
-		then
-			echo 'te' >$tmp_dir/span_termtype
-		fi
-
-		# The rest of the lines are per-channel lines
-		sed -e 1,2d $procfile | \
-		while read line
-		do 
-			# in case this is a real channel. 
-			chan_num=`echo $line |awk '{print $1}'`
-			case "$line" in
-			*WCTDM/* | *\ WRTDM/* | *OPVXA1200/*) 
-				# TDM400P/2400P and similar cards (Sangoma A200, OpenVox A1200)
-				# this can be either FXS or FXO
-				maybe_fxs=0
-				maybe_fxo=0
-				$dahdi_cfg_cmd -c <(echo fxoks=$chan_num) &>/dev/null && maybe_fxs=1
-				$dahdi_cfg_cmd -c <(echo fxsks=$chan_num) &>/dev/null && maybe_fxo=1
-				if [ $maybe_fxs = 1 ] && [ $maybe_fxo = 1 ]
-				then 
-				  # An installed module won't accept both FXS and FXO signalling types:
-					# this is an empty slot.
-					# TODO: I believe that the Sangoma A20x will reject both and thus 
-					# print nothing here. 
-				  	case "$mode" in 
-					list)  echo "# channel $chan_num, WCTDM, no module.";;
-					files) echo "# channel $chan_num, WCTDM, no module." >> $dahdi_file;;
-					esac
-					continue
-				fi
-				
-				if [ $maybe_fxs = 1 ]; then print_pattern $chan_num fxo $mode; fi
-				if [ $maybe_fxo = 1 ]; then print_pattern $chan_num fxs $mode; fi
-				;;
-			*WCFXO/*) 
-				# X100P
-				print_pattern $chan_num fxs $mode || \
-				echo "# channel $chan_num, WCFXO, inactive." >>$dahdi_file
-				;;
-			*WCUSB/*)
-				print_pattern $chan_num fxo $mode
-				;;
-			*XPP_FXO/*)
-				# Astribank FXO span
-				print_pattern $chan_num fxs $mode
-				;;
-			*XPP_FXS/*)
-				# Astribank FXS span (regular port)
-				print_pattern $chan_num fxo $mode
-				;;
-			*' FXO'/*)
-				# FXO module (probably Rhino)
-				print_pattern $chan_num fxs $mode
-				;;
-			*' FXS'/*)
-				# FXS module (probably Rhino)
-				print_pattern $chan_num fxo $mode
-				;;
-			*' ---'/*)
-				# no module (probably Rhino)
-				continue
-				;;
-			*XPP_OUT/*)
-				# Astribank FXS span (output port)
-				print_pattern -a output $chan_num fxo $mode
-				;;
-			*XPP_IN/*)
-				# Astribank FXS span (input port)
-				print_pattern -a input $chan_num fxo $mode
-				;;
-			*ZTHFC*/* | *ztqoz*/* |*ztgsm/* |*TE[24]/* | \
-				*WCT1/*|*Tor2/* | *TorISA/* | \
-				*XPP_BRI_*/* | *WP[TE]1/* | *R[124]T1/* | \
-				*XPP_[TE]1*/* )
-				detect_digital_channel "$line" "$chan_num" "$span_num"
-				;;
-			'') ;;		# Empty line (after span header)
-			*) 
-				case "$mode" in
-				list) echo "# ??: $line";;
-				files)
-					echo "# ??: $line" >>$dahdi_file
-					echo "; ??: $line" >>$zapata_file
-				esac
-				;;
-			esac
-		done
-		# end of part in sub-process.
-		
-		write_digital_config
-	done
-
-	if [ "$mode" = 'files' ]
-	then
-		cat <<EOF >> ${dahdi_file}
-
-# Global data
-
-loadzone	= $loadzone
-defaultzone	= $defaultzone
-EOF
-	fi
-	
-	if [ "$mode" = 'files' ]; then
-		mv ${ZAPCONF_FILE} ${ZAPCONF_FILE}.bak 2>/dev/null
-		mv $dahdi_file ${ZAPCONF_FILE}
-		mv ${ZAPATA_FILE} ${ZAPATA_FILE}.bak 2>/dev/nullk
-		mv $zapata_file ${ZAPATA_FILE}
-		if [ "$do_gen_zapscan" = 'yes' ]; then
-			mv $ZAPSCAN_FILE $ZAPSCAN_FILE.bak 2>/dev/null 
-			mv $zapscan_file $ZAPSCAN_FILE
-		fi
-
-		zapata_file_name=`basename $ZAPATA_FILE`
-		if ! grep -q "^#include.*$zapata_file_name" \
-			/etc/asterisk/zapata.conf
-		then
-			say "Note: generated $ZAPATA_FILE not included in zapata.conf"
-			say "To fix:  echo '#include $zapata_file_name' >>/etc/asterisk/zapata.conf"
-		fi
-	fi
-}
-
-while getopts 'c:de:Fhlm:MRsuvz' arg
-do
-	case "$arg" in
-		e) # guarantee that it is a number:
-			new_base_exten=`echo $OPTARG | tr -d -c 0-9`
-			if [ "x$new_base_exten" != x ]; then base_exten=$new_base_exten; fi
-			;;
-		c) lc_country=`echo $OPTARG | tr -d -c a-z` ;;
-		d) do_detect=yes ;;
-		F) fxsdisable=yes;;
-		u) do_unload=yes ; force_stop_ast=yes ;;
-		v) verbose=yes ;;
-		l) mode='list' ;;
-		M) do_module_list=yes; do_detect=yes ;;
-		s) force_stop_ast=yes ;;
-		R) do_restart=no ;;
-		z) do_gen_zapscan=yes ;;
-		h) usage; exit 0;;
-		*) echo >&2 "unknown parameter -$arg, Aborting"; usage; exit 1;;
-	esac
-done
-shift $(( $OPTIND-1 ))
-if [ $# != 0 ]; then
-	echo >&2 "$0: too many parameters"
-	usage
-	exit 1
-fi
-
-tmp_dir=`mktemp -d /tmp/genzaptelconf-dir-XXXXXX` || \
-	die "$0: failed to create temporary directory. Aborting"
-
-
-case "$lc_country" in
-	# the list was generated from the source of dahdi:
-	#grep '{.*[0-9]\+,.*"[a-z][a-z]"' zonedata.c | cut -d'"' -f 2 | xargs |tr ' ' '|'
-	us|au|fr|nl|uk|fi|es|jp|no|at|nz|it|gr|tw|cl|se|be|sg|il|br|hu|lt|pl|za|pt|ee|mx|in|de|ch|dk|cz|cn):;;
-	*) 
-		lc_country=us
-		echo >&2 "unknown country-code $lc_country, defaulting to \"us\""
-		;;
-esac
-# any reason for loadzone and defaultzone to be different? If so, this is
-# the place to make that difference
-loadzone=$lc_country
-defaultzone=$loadzone
-
-# make sure asterisk is not in our way
-if [ "$force_stop_ast" = 'yes' ]
-then
-	$ZAPCONF_ASTERISK_CMD stop 1>&2
-else
-  # if asterisk is running and we wanted to detect modules
-	# or simply to unload modules, asterisk needs to go away.
-	if ( [ "$do_unload" = yes ] || [ "$do_detect" = yes ] ) && \
-		pidof asterisk >/dev/null 
-	then
-		echo >&2 "Asterisk is already running. Configuration left untouched"
-		echo >&2 "You can use the option -s to shut down Asterisk for the"
-		echo >&2 "duration of the detection."
-		exit_cleanup 1
-	fi
-fi
-
-if [ "$do_unload" = yes ]
-then
-	unload_modules
-	exit_cleanup $?
-fi
-
-if [ "$do_detect" = yes ]
-then
-	detect
-fi
-
-if [ "$zapconf_use_perl" = yes ]; then
-	#redefine genconf to use perl utilities:
-	genconf() {
-		case "$1" in 
-		list) dahdi_hardware ;;
-		files) zapconf ;;
-		esac
-	}
-fi
-
-if [ "$mode" = list ]; then
-	genconf list
-else
-	#zap_reg_xpp
-	xpp_startup
-	wait_for_zapctl
-	say "Generating '${ZAPCONF_FILE} and ${ZAPATA_FILE}'"
-	genconf files
-	run_dahdi_cfg
-fi
-
-if [ "$tmp_dir" != '' ]
-then
-	rm -rf "$tmp_dir"
-fi
-
-if [ "$force_stop_ast" != 'yes' ] || [ "$do_restart" != 'yes' ]
-then
-	exit_cleanup 0
-fi
-
-if [ -x "$ZAPCONF_ASTERISK_SCRIPT" ]
-then
-	$ZAPCONF_ASTERISK_CMD start 1>&2
-fi
-
-# if in verbose mode: verify that asterisk is running
-if [ "$verbose" != 'no' ] 
-	then
-	say "Checking channels configured in Asterisk:"
-	sleep 1 # give it some time. This is enough on our simple test server
-	if [ -x ast-cmd ]
-	then
-		ast-cmd cmd "zap show channels"
-	else
-		asterisk -rx "zap show channels"
-	fi
-fi
-
-# vim:ts=8:
diff --git a/xpp/genzaptelconf.8 b/xpp/genzaptelconf.8
deleted file mode 100644
index 60568d2..0000000
--- a/xpp/genzaptelconf.8
+++ /dev/null
@@ -1,326 +0,0 @@
-.TH GENZAPTELCONF 8 "July 18th, 2005" "Xorcom Rapid Asterisk" "Linux Programmer's Manual"
-.SH "NAME" 
-.B genzaptelconf 
--- generates dahdi configuration (TDM adaptors)
-.SH SYNOPSIS
-.PP 
-.B genzaptelconf 
-[-sRdvzF] [-c <country_code>] [-e <base_exten>]
-
-.B genzaptelconf 
-[-sRdv] -l -- only list to standard output
-   
-.B genzaptelconf 
--su -- only unload dahdi modules
-
-.B genzaptelconf 
--h -- Help screen
-    
-.SH DESCRIPTION
-.B genzaptelconf 
-is a script to detect dahdi devices (currently mostly TDM cards are 
-supported). It generates both 
-.I /etc/dahdi/system.conf
-and 
-.I /etc/asterisk/zapata-channels.conf
-
-.I PRI
-and 
-.I BRI
-(with ZapBRI) cards are basically identified as well. However the span
-configiration is a default that I only hope is sane. Looking for feedback
-
-.SH OPTIONS
-.B -c
-.I country_code
-.RS
-A two-letter country code. Sets the country-code for the zonezone 
-entries in 
-.I system.conf
-, The default is the value of
-.I lc_country
-from 
-.I /etc/default/zaptel
-and failing that, "us".
-.RE
-
-.B -d
-.RS
-Also try to detect modules. Unloads all dahdi modules and loads them
-one by one. Considers a module useful if it loaded successfully and if 
-loading it has generated at least one zapata channel.
-
-The list of detected modules is written as the value of 
-.I ZAPTEL_MODS
-in 
-.I /etc/default/zaptel
-.RE
-
-.B -e
-.I base_exten_num
-.RS
-Configure channel 
-.I i 
-as extension 
-.I exten_num
-+
-.I i 
- . This is mostly for the caller-id values. Crude, but may be good enough. 
-See also
-.I -r
-.RE
-
-.B -F
-.RS
-Disable writing FXS extensions in zapata.conf
-.RE
-
-.B -l
-.RS
-Only list deceted channels and their signalling. Don't write 
-configuration files. Note, however that 
-.I -ld
-will still rewrite the modules line in 
-.I /etc/default/zaptel
-(see 
-.I -d
-above).
-.RE
-
-.B -M
-.RS
-Update
-.I /etc/modules
-with a list of our modules, thereby
-triggers their loading via modprobe on the next boot.
-
-This triggers the
-.I -d
-option as well.
-.RE
-
-.B -R
-.RS
-Don't restart asterisk even if it was stopped using
-.I -s
- .
-.RE
-
-.B -s
-.RS
-Stop asterisk for the duration of the test. The detection will only
-work if nobody uses the dahdi channels: 
-
-* To allow unloading of modules
-
-* to allow reading configuration files.
-
-This option tells the script to stop asterisk (if it was running) and to 
-try to start it after the end of the test.
-.RE
-
-.B -v
-.RS
-Be verbose. lists the detected modules if 
-.I -d
-is used. Lists detected channls. In the end tries to connect to asterisk
-to get a list of configured dahdi channels.
-.RE
-
-.B -z
-.RS
-emulate the operation of zapscan.bin: generate 
-.I /etc/asterisk/zapscan.conf
-with the results of the scan.
-.RE
-
-.SH CONFIGURATION
-Look at the beginning of the script for a number of variables that can 
-be overriden through the configuraion file. Some variables can also be 
-overriden through the environment. The configuration file is sourced by
-bash but for compatibility expected to have only 'var=VALUE' lines and
-comments or empty lines.
-
-The configuration will first be read from 
-.I /etc/default/zaptel
-if it exists, and 
-.I /etc/sysconfig/zaptel
-otherwise (But those file names may be overriden, see 
-.I ZAPTEL_BOOT_DEBIAN
-and 
-.I ZAPTEL_BOOT_FEDORA
-below). Variables set in those files will override the default settings
-and setting rom the environment.
-
-The following variables may be set from the environment:
-ZAPCONF_FILE, ZAPATA_FILE, ZAPTEL_BOOT_DEBIAN, ZAPTEL_BOOT_FEDORA,
-DEVZAP_TIMEOUT, ZTCFG
-
-.RS
-.I lc_country
-.RS
-The default country. Can be also overriden by the option -c
-.RE
-
-.I base_exten
-.RS
-The base number used for automatic numbering
-.RE
-
-.I context_manual
-.RS
-If set to 'yes', no context changes are made in zapata-channels.conf
-.RE
-
-.I context_lines
-.RS
-The context into which calls will go from dahdi trunks.
-.RE
-
-.I context_phones
-.RS
-The context into which calls will go from dahdi phones.
-.RE
-
-.I context_manual
-.RS
-If set to 'yes', no group settings are made in zapata-channels.conf
-.RE
-
-.I group_lines
-.RS
-The group number for dahdi trunks.
-.RE
-
-.I group_phones
-.RS
-The group number for dahdi phones.
-.RE
-
-.I ALL_MODULES
-.RS
-modules list. Used for unloading and modules detection. The order of modules
-is the same for both.
-.RE
-
-.I ZAPCONF_FILE
-.RS
-ztcfg's configuration file. The sane default is /etc/dahdi/system.conf .
-.RE
-
-.I ZAPATA_FILE
-.RS
-The generated partial zapata.conf snippet. Default:
-/etc/asterisk/zapata-channels.conf .
-.RE
-
-.I ZAPTEL_BOOT_DEBIAN
-.RS
-The Debian Dahdi defaults file. Normally
-.I /etc/default/zaptel
-.
-.RE
-
-
-.I ZAPTEL_BOOT_FEDORA
-.RS
-The Dahdi defaults file on various other distributions. Normally
-.I /etc/sysconfig/zaptel
- .
-.RE
-
-.I DEVZAP_TIMEOUT
-.RS
-Maximal number of seconds to wait for /dev/zap to be initializaed by
-udev.
-.RE
-
-.I ZTCFG
-.RS
-The full path to the ztcfg tool. Default: 
-.I /sbin/ztcfg
-genzaptelconf will also explicitly test for
-.I /usr/sbin/ztcfg 
-as a last resort.
-.RE
-.RE
-
-.SH FILES
-.I /etc/dahdi/system.conf
-.RS
-The configuration file used by 
-.I ztcfg
-to configure dahdi devices. re-written by 
-.I genzaptelconf
- . A backup copy is saved to
-.I /etc/dahdi/system.conf.bak
- .
-.RE
-
-.I /etc/asterisk/zapata.conf
-.RS
-The configuration file of Asterisk's 
-.I chan_zap.
-Not modified directly by 
-.I genzaptelconf.
-If you want genzaptelconf's setting to take effect, add the following 
-line at the end of 
-.I zapata.conf:
-.RS
-#include "zapata-channels.conf"
-.RE
-.RE
-
-.I /etc/asterisk/zapata-channels.conf
-.RS
-This is the snippet of 
-.I chan_zap
-configuration file that 
-.I genzaptelconf generates.
- . A backup copy is saved to
-.I /etc/asterisk/zapata-channels.conf.bak
- .
-.RE
-
-.I /etc/default/zaptel
-.RS
-This file holds configuration for both 
-.I genzaptelconf
-and
-.I /etc/init.d/dahdi .
-It is sourced by both scripts and can thus be used to override settings 
-of variables from those scripts.
-.RE
-
-.I /etc/modules
-.RS
-A debian-specific list of kernel modules to be loaded by modprobe at 
-boot time. When the option 
-.I -d
-(detect) is used, genzaptelconf will write in this file dahdi modules
-to be loaded. If you want to use a different file, set 
-.I MOD_FILELIST
- . If it is rewritten, a backup copy is saved to
-.I /etc/modules.bak
- .
-.RS
-The backup copy of 
-.I /etc/modules
-.RE
-
-.SH "SEE ALSO" 
-ztcfg(8) asterisk(8). 
-
-.SH BUGS
-If you override a configuration variable both through the environment 
-and through the configuration file, the value from the configuration 
-file wins.
-
-.SH "AUTHOR" 
-This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> 
-Permission is granted to copy, distribute and/or modify this document under 
-the terms of the GNU General Public License, Version 2 any  
-later version published by the Free Software Foundation. 
-
-On Debian systems, the complete text of the GNU General Public 
-License can be found in /usr/share/common-licenses/GPL.