diff options
Diffstat (limited to 'xpp/genconf_parameters')
-rw-r--r-- | xpp/genconf_parameters | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/xpp/genconf_parameters b/xpp/genconf_parameters index 2dcd69b..1ffc22f 100644 --- a/xpp/genconf_parameters +++ b/xpp/genconf_parameters @@ -2,18 +2,18 @@ # /etc/dahdi/genconf_parameters # # This file contains parameters that affect the -# dahdi_genconf configurator generator. +# dahdi_genconf configuration generator. # # Syntax: # * A comment from '#' to end of line # * Blank lines ignored # * Whitespace at end of line trimmed # * Single valued items: -# key <whitespaces...> value +# key <whitespace...> value # * List valued items: # key -# <whitespaces...>value1 -# <whitespaces...>value2 +# <whitespace...>value1 +# <whitespace...>value2 # ... # @@ -21,27 +21,27 @@ # extension number will be channel_number+base_exten . The default is: #base_exten 4000 # -# Make FXS (analog phones) extentions answer immediately (sets +# Make FXS (analog phones) extensions answer immediately (sets # 'immediate = yes' for them in chan_dahdi.conf). Don't enable this before # you're read documentation about this option. #fxs_immediate yes # # For FXS (analog phones) - use KS or LS? ks is the only method for # Asterisk to provide disconnect supervision and thus it would normally -# be preffered and is the default. +# be preferred and is the default. #fxs_default_start ls # # For FXO (analog lines) - use KS or LS? KS is the default and is -# normally the better choice as it allows detecting handups on many +# normally the better choice as it allows detecting hang-ups on many # lines. #fxo_default_start ls -# Set tone zone values. This is used for playing tones (busy, dialtone +# Set tone zone values. This is used for playing tones (busy, dial-tone # and such). The default is 'us'. This sets the value for both loadzone # and defaultzone in system.conf . #lc_country il -# The dialplan contenxt into which to send trunks in chan_dahdi.conf or +# The dialplan context into which to send trunks in chan_dahdi.conf or # users.conf. The default value is: #context_lines from-pstn # @@ -49,7 +49,7 @@ # users.conf. The default value is: #context_phones from-internal # -# Two extea contexts for the input ports and output ports of an +# Two extra contexts for the input ports and output ports of an # Astribank. Default values are: #context_input astbank-input #context_output astbank-output @@ -78,16 +78,16 @@ # phones. #brint_overlap -# The echo canceller to use. If you have a hardware echo canceller, just +# The echo canceler to use. If you have a hardware echo canceler, just # leave it be, as this one won't be used anyway. # # The default is mg2, but it may change in the future. E.g: a packager -# that bundles a better echo canceller may set it as the default, or -# dahdi_genconf will scan for the "best" echo canceller. +# that bundles a better echo canceler may set it as the default, or +# dahdi_genconf will scan for the "best" echo canceler. # #echo_can hpec #echo_can oslec -#echo_can none # to aboid echo cancellers altogether +#echo_can none # to avoid echo canceler altogether # bri_hardhdlc: If this parameter is set to 'yes', in the entries for # BRI cards 'hardhdlc' will be used instead of 'dchan' (an alias for |