diff options
Diffstat (limited to 'xpp/xpp_fxloader')
| -rw-r--r-- | xpp/xpp_fxloader | 358 |
1 files changed, 245 insertions, 113 deletions
diff --git a/xpp/xpp_fxloader b/xpp/xpp_fxloader index 5ed87e5..34248ef 100644 --- a/xpp/xpp_fxloader +++ b/xpp/xpp_fxloader @@ -70,9 +70,6 @@ ASTRIBANK_TOOL=${ASTRIBANK_TOOL:-/usr/sbin/astribank_tool} XPP_CONFIG="${XPP_CONFIG:-/etc/dahdi/xpp.conf}" XPP_UDEV_SLEEP_TIME="${XPP_UDEV_SLEEP_TIME:-15}" -USB_FW="${USB_FW:-USB_FW.hex}" -USB_RECOV="${USB_RECOV:-USB_RECOV.hex}" - if [ -r "$DEFAULTS" ]; then . "$DEFAULTS" fi @@ -113,6 +110,132 @@ run_fxload() { fi } +list_via_proc() { + cat /proc/bus/usb/devices | egrep '^P:|^T:' | sed \ + -e '/^T:/s/ *Spd.*//' \ + -e '/^T:/s, *Lev.*Dev#= *,\t,' \ + -e '/^T:/s,Bus=,,' \ + -e '/^P:/s,[A-Za-z]\+=,,g' \ + -e '/^P:/s,\.,,g' | awk -vusb_prefix="$USB_PREFIX" ' + /^T:/ { + bus=$2 + dev=$3 + } + /^P:/ { + vendor=$2 + sub("0x", "", vendor); + prod=$3 + sub("0x", "", product); + bcd=$4 + printf("%4s/%4s/%d\t%s/%03d/%03d\n", + vendor, prod, bcd, usb_prefix, bus, dev); + } + ' +} + +list_via_sysfs() { + find /sys/bus/usb/devices -maxdepth 1 -mindepth 1 | \ + egrep -v '/usb[0-9]|:' | while read dev; do + ( + cat "$dev/idVendor" + cat "$dev/idProduct" + cat "$dev/bcdDevice" + echo "$dev" | sed \ + -e 's,/sys/bus/usb/devices/,,' \ + -e 's,-.*,,' + cat "$dev/devnum" + ) | tr -s '\n' '\t' + echo '' + done | awk -vusb_prefix="$USB_PREFIX" '{ + printf("%4s/%4s/%d\t%s/%03d/%03d\n", + $1, $2, $3, usb_prefix, $4, $5); + }' +} + +list_via_lsusb() { + lsusb -v | awk -vusb_prefix="$USB_PREFIX" ' + /^Bus/ { + sub(":", "", $4); + dev = sprintf("%s/%s/%s ", usb_prefix, $2, $4); + } + /idVendor/ { + id_vendor = $2 + sub("0x", "", id_vendor); + } + /idProduct/ { + id_product = $2 + sub("0x", "", id_product); + } + /bcdDevice/ { + bcd_device = $2 + sub("^0*", "", bcd_device); + sub("[.]", "", bcd_device); + printf("%s/%s/%s\t%s\n", + id_vendor, id_product, bcd_device, dev); + } + ' +} + +list_devs() { + #echo >&2 "list_devs" + if [ "$#" -eq 0 ]; then + if [ -f /proc/bus/usb/devices ]; then + method='via_proc' + elif [ -d /sys/bus/usb/devices ]; then + method='via_sysfs' + else + method='via_lsusb' + fi + elif [ "$#" -eq 1 ]; then + method="$1" + else + echo >&2 "$0: unknown list_devs method='$method'" + exit 1 + fi + + case "$method" in + via_proc|via_sysfs|via_lsusb) + ;; + *) + echo >&2 "$0: unknown list_devs method='$method'" + exit 1 + ;; + esac + list_$method | grep -v '^0000/0000/' | sort +} + +filter_devs() { + id_str="$1" + + #echo >&2 "filter_devs($id_str)" + list_devs | awk -vid_str="$id_str" '{ if ($1 ~ id_str) { print } }' +} + +usb_firmware_device() { + id_str="$1" + devpath="$2" + + case "$id_str" in + e4e4/11[3456]0/101|e4e4/1163/101) + fw="USB_FW.hex" + ;; + e4e4/116[03]/201) + fw="USB_FW.201.hex" + ;; + e4e4/*) + debug "No USB firmware for device $devpath ($id_str)" + return + ;; + *) + return + ;; + esac + fw_file="$FIRMWARE_DIR/$fw" + ver=$(awk '/\$Id:/ { print $4 }' $fw_file) + debug "USB Firmware $fw_file (Version=$ver) into $devpath" + run_fxload -D "$devpath" -I "$fw_file" || exit 1 +} + run_astribank_hexload() { debug "Running: $ASTRIBANK_HEXLOAD $*" $ASTRIBANK_HEXLOAD "$@" | $LOGGER @@ -133,18 +256,14 @@ run_astribank_tool() { fi } -load_usb_fw() { - v_id=$1 - p_id=$2 - fw=$3 - - devices=`find_dev $v_id $p_id` - for dev in $devices - do - ver=$(awk '/\$Id:/ { print $4 }' $FIRMWARE_DIR/$fw) - debug "USB Firmware $FIRMWARE_DIR/$fw (Version=$ver) into $dev" - run_fxload -D $dev -I $FIRMWARE_DIR/$fw || exit 1 - done +usb_firmware_all_devices() { + devs=`list_devs` + echo "USB firmware" + echo "$devs" | while read id_str devpath + do + usb_firmware_device "$id_str" "$devpath" + done + wait_renumeration $numdevs 'e4e4/11[3456]1/*' "usb_firmware_all_devices" } load_fw_device() { @@ -152,16 +271,17 @@ load_fw_device() { fw="$2" debug "FPGA loading $fw into $dev" run_astribank_hexload -D "$dev" -F "$FIRMWARE_DIR/$fw" - if [ "$fw" = "FPGA_1161.hex" ]; then + case "$fw" in + FPGA_1161*.hex) echo_file="$FIRMWARE_DIR/OCT6104E-256D.ima" law='' law_str='uLaw' - abtool_output=`$ASTRIBANK_TOOL -D "$dev" -Q 2>/dev/null` - card_type=`echo "$abtool_output" | grep '^CARD 4:' | cut -d= -f2 | cut -d. -f1` - if [ "$card_type" = '5' ]; then + card_type=`run_astribank_tool -D "$dev" -Q 2>&1 | grep 'CARD 4' | sed -e 's/.*type=//' -e 's/\..*//'` + caps_num=`run_astribank_tool -D "$dev" -Q 2>&1 | grep 'ECHO ports' | sed -e 's/.*: *//'` + if [ $card_type -eq 5 ]; then debug "ECHO burning into $dev: $echo_file" - card_type_first=`echo "$abtool_output" | grep '^CARD 0:' | cut -d= -f2 | cut -d. -f1` - case "$card_type_first" in + card_type=`run_astribank_tool -D "$dev" -Q 2>&1 | grep 'CARD 0' | sed -e 's/.*type=//' -e 's/\..*//'` + case "$card_type" in 3) law="-A";; 4) pri_protocol='' @@ -182,88 +302,116 @@ load_fw_device() { if [ "$caps_num" != '0' ]; then run_astribank_hexload -D "$dev" -O $law "$echo_file" else - $LOGGER "WARNING: ECHO burning was skipped (no capabilities)" + echo "WARNING: ECHO burning was skipped (no capabilities)" fi fi pic_files=`echo "$FIRMWARE_DIR"/PIC_TYPE_[1-4].hex` - debug "PIC burning into $dev: $pic_files" + debug "PIC burning into $dev: begin $pic_files" run_astribank_hexload -D "$dev" -p $pic_files - debug "PIC burning finished $pic_files" - fi + debug "PIC burning into $dev: end $pic_files" + ;; + esac # Do renumeration! - run_astribank_tool -D "$dev" -n > /dev/null - debug "Reenumeration done." + run_astribank_tool -D "$dev" -n > /dev/null 2>&1 + debug "Renumeration of $dev done." } -# -# Use in manual loading. Parallelize loading -# firmwares to all of our devices -# -firmware_by_id() { - v_id=$1 - p_id=$2 - fw=$3 - - devices=`find_dev $v_id $p_id` - childs="" - for dev in $devices - do - ( - set -e - - load_fw_device "$dev" "$fw" +fpga_firmware_device() { + id_str="$1" + devpath="$2" + + id_product=`echo "$id_str" | cut -d/ -f2` + bcd_device=`echo "$id_str" | cut -d/ -f3` + case "$id_str" in + e4e4/1131/101) + fw="FPGA_FXS.hex" + ;; + e4e4/11[456]1/101) + fw="FPGA_${id_product}.hex" + ;; + e4e4/1161/201) + fw="FPGA_${id_product}.${bcd_device}.hex" + ;; + e4e4/*) + debug "No FPGA firmware for device $devpath ($id_str)" + return + ;; + *) + return + ;; + esac + debug "Loading $fw into $devpath" + load_fw_device "$devpath" "$fw" sleep_if_race - ) & - childs="$childs $!" - sleep 0.4 - done - # Wait for specific childs to get their exit status - wait $childs } numdevs() { - v_ids="$1" - p_ids="$2" - - for v in $v_ids - do - ( - for p in $p_ids - do - find_dev $v $p - done - ) - done | wc -w + id_str="$1" + + #echo >&2 "numdevs($id_str)" + filter_devs "$id_str" | wc -l } wait_renumeration() { - num="$1" - v_ids="$2" - p_ids="$3" - - while - n=`numdevs "$v_ids" "$p_ids"` - [ "$num" -gt "$n" ] - do - echo -n "." - sleep 1 - done - echo "Got all $num devices" + num="$1" + id_str="$2" + caller="$3" + iter=10 + + prev=0 + echo "Waiting renumeration ($caller)" + while + n=`numdevs "$id_str"` + [ "$num" -gt "$n" ] + do + if [ "$prev" -lt "$n" ]; then + echo -n "+" + else + echo -n "." + fi + sleep 1 + prev="$n" + debug "wait($iter) (found $n from $num devices) ($caller)" + if ! iter=`expr $iter - 1`; then + echo "Timeout (found $n from $num devices) ($caller)" + break; + fi + done + echo "Got all $num devices ($caller)" + sleep 1 # Let everything settle +} + +fpga_firmware_all_devices() { + echo "Loading FPGA firmwares" | $LOGGER + devs=`filter_devs 'e4e4/11[3456]1/*'` + n=`echo "$devs" | wc -l` + echo "$devs" | ( + while read id_str devpath; do + fpga_firmware_device "$id_str" "$devpath" & + done + sleep 1 + echo "Wait for FPGA loading processes" + wait + ) 2>&1 | $LOGGER + wait_renumeration $numdevs 'e4e4/11[3456]2/*' "fpga_firmware_device" } reset_fpga() { - totaldevs=`numdevs e4e4 '11[3456][0123]'` - devices=`find_dev e4e4 '11[3456][12]'` - debug "Reseting devices [$totaldevs devices]" - for dev in $devices - do - debug "Resetting FPGA Firmware on $dev" - sleep_if_race - run_astribank_tool -D "$dev" -r full 2>&1 >/dev/null - done - if [ "$1" = 'wait' ]; then - wait_renumeration $totaldevs e4e4 '11[3456][03]' - fi + devices=`filter_devs 'e4e4/11[3456][124]/*'` + totaldevs=`numdevs 'e4e4/11[3456][124]/*'` + $LOGGER -- "Reseting devices [$totaldevs devices]" + echo "$devices" | grep -v '^$' | while read id_str dev + do + ( + debug "Resetting FPGA Firmware on $dev" + sleep_if_race + run_astribank_tool -D "$dev" -r full >/dev/null 2>&1 + ) & + done + wait + if [ "$1" = 'wait' ]; then + wait_renumeration $totaldevs 'e4e4/11[3456][03]/*' "reset_fpga" + fi } usage() { @@ -304,26 +452,20 @@ reset-wait) reset) reset_fpga ;; +list) + filter_devs 'e4e4/*/*' + exit 0 + ;; xppdetect|load|usb) - numdevs=`numdevs e4e4 '11[3456][013]'` + numdevs=`numdevs 'e4e4/11[3456][0134]/*'` $LOGGER -- "--------- FIRMWARE LOADING: ($1) [$numdevs devices]" - load_usb_fw e4e4 1130 $USB_FW - load_usb_fw e4e4 1140 $USB_FW - load_usb_fw e4e4 1150 $USB_FW - load_usb_fw e4e4 1160 $USB_FW - load_usb_fw e4e4 1163 $USB_FW - wait_renumeration $numdevs e4e4 '11[3456]1' + usb_firmware_all_devices 2>&1 | $LOGGER if [ "$1" != 'usb' ] then - firmware_by_id e4e4 1131 FPGA_FXS.hex - firmware_by_id e4e4 1141 FPGA_1141.hex - firmware_by_id e4e4 1151 FPGA_1151.hex - firmware_by_id e4e4 1161 FPGA_1161.hex - wait_renumeration $numdevs e4e4 '11[3456]2' + fpga_firmware_all_devices fi - sleep 3 # Let it stabilize $LOGGER -- "--------- FIRMWARE IS LOADED" exit 0 ;; @@ -379,27 +521,17 @@ udev_delayed_load() { fi $LOGGER "Trying to find what to do for product $PRODUCT, device $DEVICE" - prod_id=`echo "$PRODUCT" | cut -d/ -f2` case "$PRODUCT" in e4e4/11[3456]0/*|e4e4/1163/*) - FIRM_USB="$FIRMWARE_DIR/$USB_FW" - $LOGGER "Loading firmware '$FIRM_USB' into '$DEVICE'" - run_fxload -D "$DEVICE" -I "$FIRM_USB" + usb_firmware_device "$PRODUCT" "$DEVICE" ;; e4e4/11[3456]1/*) - # There are potentially two separate udev events, for - # each of the two endpoints. Ignore the first interface: - case "$DEVPATH" in *.0) exit 0;; esac - if [ "$prod_id" = 1131 ]; then - FIRM_FPGA="FPGA_FXS.hex" # Legacy - else - FIRM_FPGA="FPGA_$prod_id.hex" - fi sleep_if_race - load_fw_device "$DEVICE" "$FIRM_FPGA" + fpga_firmware_device "$PRODUCT" "$DEVICE" & + wait # parallel firmware loading ;; esac } -udev_delayed_load & +udev_delayed_load 2>&1 | $LOGGER & |