Age | Commit message (Collapse) | Author |
|
Add extra PCI IDs to support "beroNet BN4S0e PCI Express 4x S0 Karte".
Origin: http://bugs.debian.org/600839
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9452 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
astribank_is_starting should use a timeout for the semaphore, but if the
GNU-specific semtimedop() is not available, we'll just fall back to using
semop with no time out. Not as good, but better than nothing.
(closes issue #16783)
Reported by: abelbeck
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9426 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
While slightly less efficient, this is only used when configuring the
channels initially (not the hot path) and allows dahdi-base.c to assume
that the open "file" pointer always refers to the channel on which to
perform the operation.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9352 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adding Macao tone zone data according to
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
(closes issue #17744)
Reported by: alfredtang
Patches:
zonedata.patch uploaded by alfredtang (license 1094)
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9313 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Module 'dahdi_dummy.ko' is no longer needed for DAHDI to provide timing,
therefore we can remove the explicit load of dahdi_dummy, which by
default is aliased to dahdi.ko anyway. If you've edited the DAHDI
Kbuild file in order to build dahdi_dummy explicitly, then you should
add dahdi_dummy to /etc/dahdi/modules in order to load it, but this is
not needed for normal operation.
(issue #17959)
Reported by: glen201
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9309 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9220 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Generate some sort of configuration for dynamic channels. Usable enough for
testing.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9159 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This fixes the case where the BRI spans on the Hx8 cards were displayed as
analog spans.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9133 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(closes issue #17783)
Reported by: frawd
Patches:
dahdi-tools_aligera.patch uploaded by frawd (license 610)
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9079 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
New functionality that was added in r8992 and r8993 uses new items
defined only in dahdi-linux trunk (and eventually: 2.4).
As in both cases it's a single place to check, we'll just ifdef it away.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9076 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
is chosen along with suggestions on how to fix the problem.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9067 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
channels and fix a bug preventing E&M-E1 from being detected properly
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9066 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9031 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8994 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8993 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8992 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8991 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Hmm... how badly congested can the startup of Centos be?
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8964 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8954 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
For newer kernels there's no need to sleep at all. For Centos5 systems
there seems to be a need for a large sleep for firmware load at boot time.
So let's make it a loop.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8951 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8948 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8924 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Allow using CONNECTOR/LABEL in addition to SPAN and NUM for pri_termtype
in genconf_parameters
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8923 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8854 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
If your window was larger than 80X25, you got a main "window" in the
center and the span one in the corner. This puts the span one in the
center as well.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8827 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Various values in system.conf were parsed using %i. This means that a
value with a leading 0x was considered hexadecimal and a value with a
leading 0 would be considered octal ('030' == '24' == '0x1E').
This was never documented and seems a potential cause for confusion in
case a leading zero sneaks in. It is thus removed.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8777 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
flagged and
what is displayed.
Still runs with the old usage: patlooptest <dahdi device> [<timeout>]
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8746 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8741 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8670 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8638 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8630 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
rad_apply_channels() was the same as apply_channels()
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8615 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
When the DAHDI configuration file does not configure every single span in the system,
but leaves spans unconfigured, the verbose output from dahdi_cfg would show incorrect
span numbers when reporting the line configuration, as it printed the index into the
array of configured spans, instead of their actual span numbers.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8606 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8589 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Move loading the the xpp firmwares (when called from udev) to a background
sub-process. This helps with:
* Don't block udev
* It seems that with older systems (e.g. CentOS 5) we need to wait a bit
for the device file to appear (in one of the upcoming udev events). If we
keep blocking udev, we won't have the device file.
The 'sleep' does not seem to be required for newer systems (e.g. Debian Lenny).
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8580 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8547 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8535 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Groff considers '-' a hyphen. If we want a minus (or a dash) we need to use
'\-'.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8529 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8520 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8508 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8503 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8451 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8444 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(issue #16493)
Reported by: nic_bellamy
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8430 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(issue #15446)
(issue #16447)
Reported by: lpistone
Tested by: okrief
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8422 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8306 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
kpflemming suggested modifying the error messages due to the fact
that some spans may not have a physical card associated with it.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8299 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Added handling for -1 returns by the driver. This indicates
that the specific hardware doesn't support a particular
feature.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8290 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
DAHDI-559
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8280 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@8270 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|