Big dump of newer xpp code.

For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.

xpp.r7150

* 116x Astribanks:
 - Support for the TwinStar capability and for FXO and (BRI|PRI) on
   same device.
 - New control protocol ("MPP").
 - astribank_hextool - a low-level firmware loading tool instead of
   fpga_load .
 - astribank_tool - Other MPP activities .
 - Can still reset (but just that) through older protocol.
 - astribank_hexload is required for loading FPGA firmware for USB_FW.hex 
   rev > 6885.
 - USB_FW rev. 7071 . 
 - More modular FPGA firmware (1161 only).
 - FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
 - software-settings of some capabilities with astribank_allow .

* XPP:
  - init_card_* script are less verbose.
  - Reduced rate of "Is a DAHDI sync master" message.
  - Replace member bus_id with dev_name() and set_dev_name() for
    building with 2.6.30.
  - Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
  - astribank_hook now enabled by default.
  - Has an optional hook for TwinStar.

* BRI:
  - hardhdlc support: The bri_dchan patch is no longer needed.
  - If bri_dchan patch applied: old code is used, and "dchan" is used.
  - If not: new code and "hardhdlc" is used.
  - zapconf will generate the right configuration, depending on the new
    sysfs driver attribute bri_hardhdlc, but default to "dchan" as
    before if not explicitly told.
  - Bugfix: explicitly turn off leds on startup.

* FXS:
  - Initialization and calibration fixes.
  - Notify the user just one about wrong VMWI config

* Dahdi-perl:
  - Fix detection of empty slots in wctdm.
  - Fix working with ethmf's extra file in /proc/zaptel
  - Improved detection of Rhino cards.
  - dahdi_genconf's generated text better explains files are generated.
  - /etc/xpp_order - allow specifiying an explicit order for
    Astribanks to register with Zaptel.
  - Dahdi::Xpp::Mpp - A wrapper around astribank_tool .

* dahdi.init:
  - A separate waitfor_xpds script. May now have a wait-loop in
    some cases.
  - xpp_sync needs to only be called after dahdi_cfg .
    (for the PRI module).



git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb

1 files changed, 16 insertions, 21 deletions

diff --git a/kernel/xpp/init_card_2_30 b/kernel/xpp/init_card_2_30
index 34f8a0b..efc19a9 100755
--- a/kernel/xpp/init_card_2_30
+++ b/kernel/xpp/init_card_2_30
@@ -69,11 +69,11 @@ sub debug {
 # Arrange for error logging
 if (-t STDERR || $opts{v}) {
 	$unit_id = 'Interactive';
-	main::debug "Interactive startup";
+	debug "Interactive startup";
 } else {
 	$unit_id = "$ENV{XBUS_NAME}/UNIT-$ENV{UNIT_NUMBER}";
 	open (STDERR, "| logger -t $program -p kern.info") || die;
-	main::debug "Non Interactive startup";
+	debug "Non Interactive startup";
 	foreach my $k (qw(
 			XBUS_NAME
 			XBUS_NUMBER
@@ -365,7 +365,7 @@ if($opts{v}) {
 	exit 0;
 }
 
-main::logit "Starting";
+main::debug "Starting";
 
 FXO::read_defaults;
 die "OPERMODE is undefined" unless $OPERMODE;
@@ -384,56 +384,51 @@ while(<DATA>) {
 FXO::opermode_setup;
 close REG;
 
-main::logit "Ending '$0'";
+main::debug "Ending '$0'";
 close STDERR;
 exit 0;
 
 __DATA__
-*	WD	21	28
+*	WD	21	08	# Disable PCM transfers
 *	WD	18	99
 *	WD	06	00
 
 # ----------- DAA PCM start offset ----------
 
+*	WD	23	00
+*	WD	25	00
+
 0	WD	22	00
-0	WD	23	00
 0	WD	24	00
-0	WD	25	00
+0	WD	21	28	# Enable PCM transfers, when offsets are set
 
 1	WD	22	08
-1	WD	23	00
 1	WD	24	08
-1	WD	25	00
+1	WD	21	28
 
 2	WD	22	10
-2	WD	23	00
 2	WD	24	10
-2	WD	25	00
+2	WD	21	28
 
 3	WD	22	18
-3	WD	23	00
 3	WD	24	18
-3	WD	25	00
+3	WD	21	28
 
 4	WD	22	20
-4	WD	23	00
 4	WD	24	20
-4	WD	25	00
+4	WD	21	28
 
 5	WD	22	28
-5	WD	23	00
 5	WD	24	28
-5	WD	25	00
+5	WD	21	28
 
 6	WD	22	30
-6	WD	23	00
 6	WD	24	30
-6	WD	25	00
+6	WD	21	28
 
 7	WD	22	38
-7	WD	23	00
 7	WD	24	38
-7	WD	25	00
+7	WD	21	28
 
 # ----------- DAA ONHOOK --------------------
 *	WD	05	00