diff options
author | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
---|---|---|
committer | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
commit | 18c6813f2c788b603dab363b9138d65d24252167 (patch) | |
tree | 92402484268f2bc1d5e4e55f7321b9204ad47c5f /kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm | |
parent | 2a73224819e867eaf56371d6055e2ca4d36396b6 (diff) |
Big dump of newer xpp code.
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
Diffstat (limited to 'kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm')
-rw-r--r-- | kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm b/kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm index e9166c7..73e3e71 100644 --- a/kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm +++ b/kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm @@ -134,12 +134,13 @@ sub pci_sorter { return $a->priv_device_name() cmp $b->priv_device_name(); } -sub new($$) { - my $pack = shift or die "Wasn't called as a class method\n"; - my $self = { @_ }; +sub new($@) { + my $pack = shift || die "Wasn't called as a class method\n"; + my %attr = @_; + my $name = sprintf("pci:%s", $attr{PRIV_DEVICE_NAME}); + my $self = Zaptel::Hardware->new($name, 'PCI'); + %{$self} = (%{$self}, %attr); bless $self, $pack; - Zaptel::Hardware::device_detected($self, - sprintf("pci:%s", $self->{PRIV_DEVICE_NAME})); return $self; } @@ -197,7 +198,6 @@ sub scan_devices($) { next unless defined $pci_ids{$key}; my $d = Zaptel::Hardware::PCI->new( - BUS_TYPE => 'PCI', PRIV_DEVICE_NAME => $dev->{PRIV_DEVICE_NAME}, VENDOR => $dev->{VENDOR}, PRODUCT => $dev->{PRODUCT}, |