xpp r5723: Includes, among others:

* New firmware protocol version: 3.0 .
* New numbers for the device types: (e.g. in card_init* scripts)
  - FXS: 1 (was: 3)
  - FXO: 2 (was: 4)
  - BRI: 3 (was: 6 for TE, 7 for NT)
  - PRI: 4 (was: 9)
* Init scripts of FXS and FXO modules are now written in Perl as well
  (be sure to have File::Basename, e.g: perl-modules in Debian).
* calibrate_slics merged into init_card_1_30 .
* Module parameter print_dbg replaced with debug . Same meaning.
* init_fxo_modes removed: content moved into init_card_2_30, verified
  at build time.
* Code tested with sparse. Most warnings were fixed.
* Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
  ignored by ztscan.
* Handle null config_desc we get from some crazy USB controllers.
* genzaptelconf: Fix reporting of empty slots in list mode.
* xpp_blink can now blink a single analog port.
* "slics" has been renamed "chipregs".
* Fixed a small typo in fpga_load(8).
* Fixed bashism in xpp_fxloader.


git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4264 5390a7c7-147a-4af0-8ec9-7488f05a26cb

1 files changed, 0 insertions, 165 deletions

diff --git a/xpp/init_card_4_29 b/xpp/init_card_4_29
deleted file mode 100755
index 5dda0b2..0000000
--- a/xpp/init_card_4_29
+++ /dev/null
@@ -1,165 +0,0 @@
-#! /bin/sh
-#
-# Written by Oron Peled <oron@actcom.co.il>
-# Copyright (C) 2006, Xorcom
-#
-# All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# See the file LICENSE in the top level of this tarball.
-#
-
-#
-# $Id$
-#
-# Data format:
-#	- A comment start with ';' or '#' until the end of line
-#	- Blank lines are ignored
-#	- Fields are whitespace separated (spaces or tabs)
-#
-# The fields are (in command line order):
-#	1. DAA select in decimal (range 0-7).
-#	   31 is a special value which means ALL DAAs (only some registers
-#	   accept settings for ALL DAAs).
-#	2. Command word:
-#		- RD	Read Direct register.
-#		- WD	Write Direct register.
-#	3. Register number in hexadecimal.
-#	4. Data byte in hexadecimal. (for WD command).
-#
-
-# ----------------------------------==== 8-channel FXO unit initialization ===-----------------------------------------
-
-set -e
-
-opermode='FCC'
-
-me=`basename $0`
-INIT_DIR=`dirname $0`
-XPP_BASE=/proc/xpp
-export XPP_BASE
-LOGGER="logger -s -t $me"
-
-ZAPTEL_BOOT_DEBIAN=${ZAPTEL_BOOT_DEBIAN:-/etc/default/zaptel}
-ZAPTEL_BOOT_FEDORA=${ZAPTEL_BOOT_FEDORA:-/etc/sysconfig/zaptel}
-
-# read default configuration from /etc/default/zaptel
-if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi
-if [ -r $ZAPTEL_BOOT_FEDORA ]; then . $ZAPTEL_BOOT_FEDORA; fi
-
-if [ "$DEBUG_CALIBRATION"=1 ]; then
-	LOGGER=":"
-fi
-
-# Always redirect stderr somewhere, otherwise the shell script will die
-# when it tries to do I/O related stuff on closed file descriptor.
-# Our default is to throw it down the bit-bucket.
-exec 2> /dev/console
-## If you wish to trace this script:
-#exec 2> /tmp/xpp_init_$XPD_NAME
-## Altenativly, if you have multiple XBUS'es:
-#exec 2> /tmp/xpp_init_$XBUS_NAME_$XPD_NAME
-#set -x
-
-# redirect script output to the "slics" (registers command) file:
-exec 1> "$XPP_BASE/$XPD_BUS/$XPD_NAME/slics"
-
-$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Initializing '$0'"
-
-# Several countries (South Africa, UAE, anybody else)
-# require a shorter delay:
-case "$opermode" in
-SOUTHAFRICA|UAE) echo 31 WD 17 2B;;
-esac
-
-# Remove empty lines and commets. Not strictly necessary
-# but works around some limitations of the proc interface:
-echo "
-
-
-31	WD	21	28
-31	WD	18	99
-31	WD	06	00
-
-# ----------- DAA PCM start offset ----------
-
-0	WD	22	00
-0	WD	23	00
-0	WD	24	00
-0	WD	25	00
-
-1	WD	22	08
-1	WD	23	00
-1	WD	24	08
-1	WD	25	00
-
-2	WD	22	10
-2	WD	23	00
-2	WD	24	10
-2	WD	25	00
-
-3	WD	22	18
-3	WD	23	00
-3	WD	24	18
-3	WD	25	00
-
-4	WD	22	20
-4	WD	23	00
-4	WD	24	20
-4	WD	25	00
-
-5	WD	22	28
-5	WD	23	00
-5	WD	24	28
-5	WD	25	00
-
-6	WD	22	30
-6	WD	23	00
-6	WD	24	30
-6	WD	25	00
-
-7	WD	22	38
-7	WD	23	00
-7	WD	24	38
-7	WD	25	00
-
-# ----------- DAA ONHOOK --------------------
-31	WD	05	00
-
-# Set tip to ring voltage to 3.5 volts while off-hook
-# instead of default of 3.1
-31	WD	1A	C0
-" | sed -e 's/[;#].*$//' -e '/^[ 	]*$/d'
-
-# Turning off red LEDs
-# Warning: do not send WD 31 20 A0 !
-for i in `seq 0 7`; do 
-	echo "$i WD 20 A0"
-done
-
-# based on fxo_modes from wctdm.c . 
-reg16=00; reg26=00; reg30=00; reg31=20; ring_osc=; ring_x=;
-mode="$opermode"
-if [ -r $INIT_DIR/init_fxo_modes ]; then
-	. $INIT_DIR/init_fxo_modes
-fi
-# Our register numbers are HEXADECIMAL!
-echo "
-31 WD 10 $reg16
-31 WD 1A $reg26
-31 WD 1E $reg30
-31 WD 1F $reg31
-"
-# for the FXS:
-#if [ "$ring_osc" != '' ]; then
-#	/bin/echo "31 WI __ $ring_osc"
-#fi
-#if [ "$ring_x" != '' ]; then
-#	/bin/echo "31 WI __ $ring_x"
-#fi
-$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Ending '$0'"
-exit 0